私有云中Kubernetes Clu

Walton

发布于 2018-04-16 10:48:33

1.3K0

发布于 2018-04-16 10:48:33

文章被收录于专栏：KubernetesKubernetes

Kubernetes Master HA架构图

配置与说明

所有组件可以通过kubelet static pod的方式启动和管理，由kubelet static pod机制保证宿主机上各个组件的高可用, 注意kubelet要添加配置--allow-privileged=true;
管理static pod的kubelet的高可用通过systemd来负责；
当然，你也可以直接通过进程来部署这些组件，systemd来直接管理这些进程；（我们选择的是这种方式，降低复杂度。）
上图中，etcd和Master部署在一起，三个Master节点分别部署了三个etcd，这三个etcd组成一个集群；（当然，如果条件允许，建议将etcd集群和Master节点分开部署。）
每个Master中的apiserver、controller-manager、scheduler都使用hostNetwork, controller-manager和scheduler通过localhost连接到本节点的apiserver，而不会和其他两个Master节点的apiserver连接；
外部的rest-client、kubectl、kubelet、kube-proxy等都通过TLS证书，在LB节点做TLS Termination，LB出来就是http请求发到经过LB策略（RR）到对应的apiserver instance；
apiserver到kubelet server和kube-proxy server的访问也类似，Https到LB这里做TLS Termination，然后http请求出来到对应node的kubelet/kube-proxy server；
apiserver的HA通过经典的haproxy + keepalived来保证，集群对外暴露VIP；
controller-manager和scheduler的HA通过自身提供的leader选举功能（--leader-elect=true），使得3个controller-manager和scheduler都分别只有一个是leader，leader处于正常工作状态，当leader失败，会重新选举新leader来顶替继续工作；
因此，该HA方案中，通过haproxy+keepalived来做apiserver的LB和HA，controller-manager和scheduler通过自身的leader选举来达到HA，etcd通过raft协议保证etcd cluster数据的一致性，达到HA；
keepalived的配置可参考如下：

12. haproxy的配置可参考如下：

 global
    log 127.0.0.1 local0
    maxconn 32768
    pidfile /run/haproxy.pid
    # turn on stats unix socket
    stats socket /run/haproxy.stats
    tune.ssl.default-dh-param  2048

default 
    log global
    mode http
    option httplog
    option dontlognull
    retries 3
    timeout connect 5000ms
    timeout client 50000ms
    timeout server 50000ms
    timeout check 50000ms
    timeout queue 50000ms

frontend frontend-apisver-http
    bind *:8080
    option forwardfo

    acl local_net src 192.168.205.0/24

    http-request allow if local_net
    http-request deny

    default_backend backend-apiserver-http

frontedn frontend-apiserver-https
    # haproxy enable ssl
    bind *:443 ssl crt /etc/kubernetes/master-lb.pem
    option forwardfo
    default_backend backend-apiserver-http

backend backend-apiserver-http
    balance roundrobin
    option forward-fo

    server master-1 192.168.205.11:8080  check
    server master-2 192.168.205.12:8080  check
    server master-3 192.168.205.13:8080  check

listen  admin_stats
       bind  0.0.0.0:80
       log  global
       mode  http
       maxconn  10
       stats  enable
       #Hide  HAPRoxy version, a necessity for any public-facing site
       stats  hide-version
       stats  refresh 30s
       stats  show-node
       stats  realm Haproxy\ Statistics
       stats  auth caicloud:caicloud
       stats  uri /haproxy?stats

13. LB所在的节点，注意确保ip_vs model已加载、ip_forward和ip_nonlocal_bind已开启；

14. 如果你通过pod来部署K8S的组件，可参考官方给出的Yaml：

apiserver

apiVersion: v1
kind: Pod
metadata:
  name: kube-apiserver
spec:
  hostNetwork: true
  containers:
  - name: kube-apiserver
    image: gcr.io/google_containers/kube-apiserver:9680e782e08a1a1c94c656190011bd02
    command:
    - /bin/sh
    - -c
    - /usr/local/bin/kube-apiserver --address=127.0.0.1 --etcd-servers=http://127.0.0.1:4001
      --cloud-provider=gce   --admission-control=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota
      --service-cluster-ip-range=10.0.0.0/16 --client-ca-file=/srv/kubernetes/ca.crt
      --basic-auth-file=/srv/kubernetes/basic_auth.csv --cluster-name=e2e-test-bburns
      --tls-cert-file=/srv/kubernetes/server.cert --tls-private-key-file=/srv/kubernetes/server.key
      --secure-port=443 --token-auth-file=/srv/kubernetes/known_tokens.csv  --v=2
      --allow-privileged=False 1>>/var/log/kube-apiserver.log 2>&1
    ports:
    - containerPort: 443
      hostPort: 443
      name: https
    - containerPort: 7080
      hostPort: 7080
      name: http
    - containerPort: 8080
      hostPort: 8080
      name: local
    volumeMounts:
    - mountPath: /srv/kubernetes
      name: srvkube
      readOnly: true
    - mountPath: /var/log/kube-apiserver.log
      name: logfile
    - mountPath: /etc/ssl
      name: etcssl
      readOnly: true
    - mountPath: /usr/share/ssl
      name: usrsharessl
      readOnly: true
    - mountPath: /var/ssl
      name: varssl
      readOnly: true
    - mountPath: /usr/ssl
      name: usrssl
      readOnly: true
    - mountPath: /usr/lib/ssl
      name: usrlibssl
      readOnly: true
    - mountPath: /usr/local/openssl
      name: usrlocalopenssl
      readOnly: true
    - mountPath: /etc/openssl
      name: etcopenssl
      readOnly: true
    - mountPath: /etc/pki/tls
      name: etcpkitls
      readOnly: true
  volumes:
  - hostPath:
      path: /srv/kubernetes
    name: srvkube
  - hostPath:
      path: /var/log/kube-apiserver.log
    name: logfile
  - hostPath:
      path: /etc/ssl
    name: etcssl
  - hostPath:
      path: /usr/share/ssl
    name: usrsharessl
  - hostPath:
      path: /var/ssl
    name: varssl
  - hostPath:
      path: /usr/ssl
    name: usrssl
  - hostPath:
      path: /usr/lib/ssl
    name: usrlibssl
  - hostPath:
      path: /usr/local/openssl
    name: usrlocalopenssl
  - hostPath:
      path: /etc/openssl
    name: etcopenssl
  - hostPath:
      path: /etc/pki/tls
    name: etcpkitls

controller-manager

apiVersion: v1
kind: Pod
metadata:
  name: kube-controller-manager
spec:
  containers:
  - command:
    - /bin/sh
    - -c
    - /usr/local/bin/kube-controller-manager --master=127.0.0.1:8080 --cluster-name=e2e-test-bburns
      --cluster-cidr=10.245.0.0/16 --allocate-node-cidrs=true --cloud-provider=gce  --service-account-private-key-file=/srv/kubernetes/server.key
      --v=2 --leader-elect=true 1>>/var/log/kube-controller-manager.log 2>&1
    image: gcr.io/google_containers/kube-controller-manager:fda24638d51a48baa13c35337fcd4793
    livenessProbe:
      httpGet:
        path: /healthz
        port: 10252
      initialDelaySeconds: 15
      timeoutSeconds: 1
    name: kube-controller-manager
    volumeMounts:
    - mountPath: /srv/kubernetes
      name: srvkube
      readOnly: true
    - mountPath: /var/log/kube-controller-manager.log
      name: logfile
    - mountPath: /etc/ssl
      name: etcssl
      readOnly: true
    - mountPath: /usr/share/ssl
      name: usrsharessl
      readOnly: true
    - mountPath: /var/ssl
      name: varssl
      readOnly: true
    - mountPath: /usr/ssl
      name: usrssl
      readOnly: true
    - mountPath: /usr/lib/ssl
      name: usrlibssl
      readOnly: true
    - mountPath: /usr/local/openssl
      name: usrlocalopenssl
      readOnly: true
    - mountPath: /etc/openssl
      name: etcopenssl
      readOnly: true
    - mountPath: /etc/pki/tls
      name: etcpkitls
      readOnly: true
  hostNetwork: true
  volumes:
  - hostPath:
      path: /srv/kubernetes
    name: srvkube
  - hostPath:
      path: /var/log/kube-controller-manager.log
    name: logfile
  - hostPath:
      path: /etc/ssl
    name: etcssl
  - hostPath:
      path: /usr/share/ssl
    name: usrsharessl
  - hostPath:
      path: /var/ssl
    name: varssl
  - hostPath:
      path: /usr/ssl
    name: usrssl
  - hostPath:
      path: /usr/lib/ssl
    name: usrlibssl
  - hostPath:
      path: /usr/local/openssl
    name: usrlocalopenssl
  - hostPath:
      path: /etc/openssl
    name: etcopenssl
  - hostPath:
      path: /etc/pki/tls
    name: etcpkitls

scheduler

apiVersion: v1
kind: Pod
metadata:
  name: kube-scheduler
spec:
  hostNetwork: true
  containers:
  - name: kube-scheduler
    image: gcr.io/google_containers/kube-scheduler:34d0b8f8b31e27937327961528739bc9
    command:
    - /bin/sh
    - -c
    - /usr/local/bin/kube-scheduler --master=127.0.0.1:8080 --v=2 --leader-elect=true 1>>/var/log/kube-scheduler.log
      2>&1
    livenessProbe:
      httpGet:
        path: /healthz
        port: 10251
      initialDelaySeconds: 15
      timeoutSeconds: 1
    volumeMounts:
    - mountPath: /var/log/kube-scheduler.log
      name: logfile
    - mountPath: /var/run/secrets/kubernetes.io/serviceaccount
      name: default-token-s8ejd
      readOnly: true
  volumes:
  - hostPath:
      path: /var/log/kube-scheduler.log
    name: logfile

etcd

apiVersion: v1
kind: Pod
metadata:
  name: etcd-server
spec:
  hostNetwork: true
  containers:
  - image: gcr.io/google_containers/etcd:2.0.9
    name: etcd-container
    command:
    - /usr/local/bin/etcd
    - --name
    - ${NODE_NAME}
    - --initial-advertise-peer-urls
    - http://${NODE_IP}:2380
    - --listen-peer-urls
    - http://${NODE_IP}:2380
    - --advertise-client-urls
    - http://${NODE_IP}:4001
    - --listen-client-urls
    - http://127.0.0.1:4001
    - --data-dir
    - /var/etcd/data
    - --discovery
    - ${DISCOVERY_TOKEN}
    ports:
    - containerPort: 2380
      hostPort: 2380
      name: serverport
    - containerPort: 4001
      hostPort: 4001
      name: clientport
    volumeMounts:
    - mountPath: /var/etcd
      name: varetcd
    - mountPath: /etc/ssl
      name: etcssl
      readOnly: true
    - mountPath: /usr/share/ssl
      name: usrsharessl
      readOnly: true
    - mountPath: /var/ssl
      name: varssl
      readOnly: true
    - mountPath: /usr/ssl
      name: usrssl
      readOnly: true
    - mountPath: /usr/lib/ssl
      name: usrlibssl
      readOnly: true
    - mountPath: /usr/local/openssl
      name: usrlocalopenssl
      readOnly: true
    - mountPath: /etc/openssl
      name: etcopenssl
      readOnly: true
    - mountPath: /etc/pki/tls
      name: etcpkitls
      readOnly: true
  volumes:
  - hostPath:
      path: /var/etcd/data
    name: varetcd
  - hostPath:
      path: /etc/ssl
    name: etcssl
  - hostPath:
      path: /usr/share/ssl
    name: usrsharessl
  - hostPath:
      path: /var/ssl
    name: varssl
  - hostPath:
      path: /usr/ssl
    name: usrssl
  - hostPath:
      path: /usr/lib/ssl
    name: usrlibssl
  - hostPath:
      path: /usr/local/openssl
    name: usrlocalopenssl
  - hostPath:
      path: /etc/openssl
    name: etcopenssl
  - hostPath:
      path: /etc/pki/tls
    name: etcpkitls

本文参与腾讯云自媒体分享计划，分享自作者个人站点/博客。

如有侵权请联系 cloudcommunity@tencent.com 删除

kubernetes

api

本文分享自作者个人站点/博客前往查看

如有侵权，请联系 cloudcommunity@tencent.com 删除。

本文参与腾讯云自媒体分享计划，欢迎热爱写作的你一起参与！

kubernetes

api

登录后参与评论

0 条评论

热度

私有云中Kubernetes Clu

私有云中Kubernetes Clu

Kubernetes Master HA架构图

配置与说明

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐