专栏首页散尽浮华使用Megacli64对服务器物理磁盘做Raid并通过uuid方式挂载

使用Megacli64对服务器物理磁盘做Raid并通过uuid方式挂载

需求说明:公司最近来了一批服务器,用于大数据业务部署。数据节点服务器由14块物理磁盘,其中有2块是900G的盘,12块是4T的盘。在服务器系统安装时,进入系统的BIOS界面:1)将2块900G的磁盘做成raid1用作系统盘(顺便说一下:raid0最少需要1块磁盘;raid1最少需要2块磁盘;raid10最少需要4块磁盘,raid5至少需要3块磁盘);2)将其中的2块4T的磁盘做成raid1,分别挂载到/data1和/data2用作大数据日志存储;3)另外的10块4T的磁盘在系统安装时没做raid也没做分区,打算在系统安装后,登录到系统终端通过命令行进行直接进行10块盘的格式化,并分别挂载到/data3、/data4、/data5、/data6、/data7、/data8、/data9、/data10、/data11、/data12,用作大数据业务的数据盘,文件格式为ext4,采用uuid方式挂载,挂载属性为noatime,nobarrier。

待服务器系统安装后,登录机器,使用"fdisk -l"命令,发现除了看到4块做raid的盘,其余的10块物理磁盘看不到:

[root@data-node01 ~]# fdisk -l

Disk /dev/sdb: 2001.1 GB, 2001111154688 bytes
255 heads, 63 sectors/track, 243287 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0004a319

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1      243288  1954208768   83  Linux

Disk /dev/sdd: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdf: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sde: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdh: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sda: 899.5 GB, 899527213056 bytes
255 heads, 63 sectors/track, 109361 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00026ac4

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          52      409600   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              52        4229    33554432   82  Linux swap / Solaris
/dev/sda3            4229      109362   844479488   83  Linux

Disk /dev/sdc: 1999.1 GB, 1999114010624 bytes
255 heads, 63 sectors/track, 243045 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0006d390

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1      243046  1952258048   83  Linux

这时候,需要用到一款管理维护硬件RAID软件-MegaCli,可以通过它来了解当前raid卡的所有信息,包括 raid卡的型号,raid的阵列类型,raid 上各磁盘状态,等等。操作记录如下:

1)下载及安装MegaCLI工具
下载地址:https://pan.baidu.com/s/1TAGHjTA19ZR8MGODaqy7Mg
提取密码:msbq

下载到/usr/loca/src目录下
[root@data-node01 ~]# cd /usr/local/src/
[root@data-node01 src]# ls
ibm_utl_sraidmr_megacli-8.00.48_linux_32-64.zip
[root@data-node01 src]# unzip ibm_utl_sraidmr_megacli-8.00.48_linux_32-64.zip
[root@data-node01 src]# cd linux/
[root@data-node01 linux]# ls
Lib_Utils-1.00-09.noarch.rpm  MegaCli-8.00.48-1.i386.rpm
[root@data-node01 linux]# rpm -ivh Lib_Utils-1.00-09.noarch.rpm MegaCli-8.00.48-1.i386.rpm

说明:安装完毕之后MegaCli64所在路径为/opt/MegaRAID/MegaCli/MegaCli64,在此路径下可以运行MegaCli64工具,切换到其它路径下则不能执行,
此时为了使用方便,可以考虑将/opt/MegaRAID/MegaCli/MegaCli64追加到系统PATH变量,或者像下面这样做(建议):
[root@data-node01 linux]# ln -s /opt/MegaRAID/MegaCli/MegaCli64 /bin/MegaCli64
[root@data-node01 linux]# ln -s /opt/MegaRAID/MegaCli/MegaCli64 /sbin/MegaCli64

2)使用MegaCli64命令进行相关操作
先查看磁盘数量。如下可以看出,一共有14块物理磁盘
[root@data-node01 linux]# MegaCli64 -PDList -aALL | egrep 'Enclosure Device ID|Slot Number'
Enclosure Device ID: 32
Slot Number: 0
Enclosure Device ID: 32
Slot Number: 1
Enclosure Device ID: 32
Slot Number: 2
Enclosure Device ID: 32
Slot Number: 3
Enclosure Device ID: 32
Slot Number: 4
Enclosure Device ID: 32
Slot Number: 5
Enclosure Device ID: 32
Slot Number: 6
Enclosure Device ID: 32
Slot Number: 7
Enclosure Device ID: 32
Slot Number: 8
Enclosure Device ID: 32
Slot Number: 9
Enclosure Device ID: 32
Slot Number: 10
Enclosure Device ID: 32
Slot Number: 11
Enclosure Device ID: 32
Slot Number: 12
Enclosure Device ID: 32
Slot Number: 13

接着查看磁盘信息 
[root@data-node01 linux]# MegaCli64 -PDList -aALL
Adapter #0

Enclosure Device ID: 32
Slot Number: 0
Enclosure position: 0
Device Id: 0
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 3.638 TB [0x1d1c0beb0 Sectors]
Non Coerced Size: 3.637 TB [0x1d1b0beb0 Sectors]
Coerced Size: 3.637 TB [0x1d1b00000 Sectors]
Firmware state: Online, Spun Up
SAS Address(0): 0x500056b3983fbac0
Connected Port Number: 0(path0) 
Inquiry Data:         4837K2DVF7DETOSHIBA MG04ACA400NY                        FK3D
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :30C (86.00 F)

...........
...........
Enclosure Device ID: 32
Slot Number: 3
Enclosure position: 0
Device Id: 3
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 3.638 TB [0x1d1c0beb0 Sectors]
Non Coerced Size: 3.637 TB [0x1d1b0beb0 Sectors]
Coerced Size: 3.637 TB [0x1d1b00000 Sectors]
Firmware state: unconfigured(good), Spun Up
SAS Address(0): 0x500056b3983fbac3
Connected Port Number: 0(path0) 
Inquiry Data:         4838K1VCF7DETOSHIBA MG04ACA400NY                        FK3D
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None 
Device Speed: 6.0Gb/s 
Link Speed: 6.0Gb/s 
Media Type: Hard Disk Device
Drive Temperature :30C (86.00 F)
...........
...........

如上命令结果信息中,注意查看"Firmware state"的状态:
如果该状态为Online,就说明该磁盘已被做成raid阵列,
如果该状态为unconfigured(good),就说明该磁盘没有被做成raid阵列,但状态OK。

由上面命令可知,前2块4T的磁盘做成了raid,其余10块4T的磁盘没有做raid,另2块900G的磁盘做成了raid。

--------------------------------------------------------------------------------------

现在的做法是:
通过MegaCli工具将那10块4T的磁盘分别做成raid0,然后格式化成ext4,并使用uuid方式挂载。

依次对第3-12块盘做成raid0阵列,其中:
-r0表示做成raid0阵列,[32:2]中的32为Enclosure Device ID,5为Slot Number。
WB Direct:磁盘Write back
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:2] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:3] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:4] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:5] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:6] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:7] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:8] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:9] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:10] WB Direct -a0
[root@data-node01 linux]# MegaCli64 -CfgLdAdd -r0[32:11] WB Direct -a0

然后再次查看磁盘情况,发现"Firmware state"的状态都为Online,即所有磁盘都在raid阵列中了。
[root@data-node01 linux]# MegaCli64 -PDList -aALL

然后使用"fdisk -l"就能发现所有的物理磁盘了
[root@data-node01 linux]# fdisk -l

Disk /dev/sdb: 1993.4 GB, 1993414541312 bytes
255 heads, 63 sectors/track, 242352 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000cd8df

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1      242353  1946692608   83  Linux

Disk /dev/sda: 899.5 GB, 899527213056 bytes
255 heads, 63 sectors/track, 109361 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000b231b

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          52      409600   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              52        4229    33554432   82  Linux swap / Solaris
/dev/sda3            4229      109362   844479488   83  Linux

Disk /dev/sdc: 2006.8 GB, 2006810624000 bytes
255 heads, 63 sectors/track, 243980 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000010e5

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1      243981  1959774208   83  Linux

Disk /dev/sdd: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sde: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdf: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdg: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdh: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdi: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdj: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdk: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdl: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


Disk /dev/sdm: 4000.2 GB, 4000225165312 bytes
255 heads, 63 sectors/track, 486333 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

---------------------------------------------------------------------------

对这10块磁盘进行格式化,脚本如下:
[root@data-node01 ~]# cat disk.list 
/dev/sdd
/dev/sde
/dev/sdf
/dev/sdg
/dev/sdh
/dev/sdi
/dev/sdj
/dev/sdk
/dev/sdl
/dev/sdm

[root@data-node01 ~]# cat mkfs.disk.sh 
#!/bin/bash
for i in `cat /root/disk.list`
do
 echo 'y' | /sbin/mkfs.ext4 $i &
done

[root@data-node01 ~]# sh -x mkfs.disk.sh

接着进行挂载
[root@data-node01 ~]# /bin/mkdir /data{3,4,5,6,7,8,9,10,11,12}

查看这10块盘的uuid(下面两种方式都可以)
[root@data-node01 ~]# blkid
[root@data-node01 ~]# ls -l /dev/disk/by-uuid/

[root@data-node01 ~]# blkid
/dev/sda3: UUID="964bec23-58b4-4a6b-a96f-f2e3222fc096" TYPE="ext4" 
/dev/sdc1: UUID="9acdef9d-fbe1-4d9f-82ff-9e9920df868e" TYPE="ext4" 
/dev/sdb1: UUID="696f5971-4c7c-4312-a1c3-a20fc3772299" TYPE="ext4" 
/dev/sda1: UUID="ee26ded4-8334-4a0f-84bc-cc97d103714e" TYPE="ext4" 
/dev/sda2: UUID="316cb693-05fe-473d-a2ff-3c3c0e0e6c3d" TYPE="swap" 
/dev/sdd: UUID="f92e73be-526d-4d84-8f5b-95273ebbd352" TYPE="ext4" 
/dev/sde: UUID="0a6404ea-60dc-4e3e-b542-48a313e149dd" TYPE="ext4" 
/dev/sdf: UUID="05891dd0-256a-4f7f-a2de-f1f858eb2a95" TYPE="ext4" 
/dev/sdg: UUID="77df1f77-0168-430e-96a3-f2eb44e15242" TYPE="ext4" 
/dev/sdh: UUID="e1f11339-ad68-44a1-a600-066094439ed2" TYPE="ext4" 
/dev/sdi: UUID="628f1658-d8f9-4573-a124-0712b0c29e90" TYPE="ext4" 
/dev/sdj: UUID="9ee336b0-3960-4cfd-9cb6-c92535f45ebd" TYPE="ext4" 
/dev/sdk: UUID="bb6c1e2d-41b8-407d-b6df-df2e3ffc9c52" TYPE="ext4" 
/dev/sdl: UUID="9ca6aecf-e0f1-4338-a7eb-e8a1d2f3b017" TYPE="ext4" 
/dev/sdm: UUID="a5bf2880-4981-462a-8042-c6e913627c3d" TYPE="ext4" 

单独找出这10块磁盘的uuid
[root@data-node01 ~]# blkid|tail -10|awk '{print $2}'
UUID="f92e73be-526d-4d84-8f5b-95273ebbd352"
UUID="0a6404ea-60dc-4e3e-b542-48a313e149dd"
UUID="05891dd0-256a-4f7f-a2de-f1f858eb2a95"
UUID="77df1f77-0168-430e-96a3-f2eb44e15242"
UUID="e1f11339-ad68-44a1-a600-066094439ed2"
UUID="628f1658-d8f9-4573-a124-0712b0c29e90"
UUID="9ee336b0-3960-4cfd-9cb6-c92535f45ebd"
UUID="bb6c1e2d-41b8-407d-b6df-df2e3ffc9c52"
UUID="9ca6aecf-e0f1-4338-a7eb-e8a1d2f3b017"
UUID="a5bf2880-4981-462a-8042-c6e913627c3d"

[root@data-node01 ~]# blkid|tail -10|awk '{print $2}'|sed 's/"//g'
UUID=f92e73be-526d-4d84-8f5b-95273ebbd352
UUID=0a6404ea-60dc-4e3e-b542-48a313e149dd
UUID=05891dd0-256a-4f7f-a2de-f1f858eb2a95
UUID=77df1f77-0168-430e-96a3-f2eb44e15242
UUID=e1f11339-ad68-44a1-a600-066094439ed2
UUID=628f1658-d8f9-4573-a124-0712b0c29e90
UUID=9ee336b0-3960-4cfd-9cb6-c92535f45ebd
UUID=bb6c1e2d-41b8-407d-b6df-df2e3ffc9c52
UUID=9ca6aecf-e0f1-4338-a7eb-e8a1d2f3b017
UUID=a5bf2880-4981-462a-8042-c6e913627c3d

将这10块磁盘的uuid好放到/etc/fastab开启启动文件里
[root@data-node01 ~]# cat /root/a.txt 
/data3                  ext4    noatime,nobarrier    0 0
/data4                  ext4    noatime,nobarrier    0 0
/data5                  ext4    noatime,nobarrier    0 0
/data6                  ext4    noatime,nobarrier    0 0
/data7                  ext4    noatime,nobarrier    0 0
/data8                  ext4    noatime,nobarrier    0 0
/data9                  ext4    noatime,nobarrier    0 0
/data10                 ext4    noatime,nobarrier    0 0
/data11                 ext4    noatime,nobarrier    0 0
/data12                 ext4    noatime,nobarrier    0 0

[root@data-node01 ~]# blkid|tail -10|awk '{print $2}'|sed 's/"//g'|paste - /root/a.txt  >> /etc/fastab
UUID=f92e73be-526d-4d84-8f5b-95273ebbd352 /data3                  ext4    noatime,nobarrier    0 0
UUID=0a6404ea-60dc-4e3e-b542-48a313e149dd /data4                  ext4    noatime,nobarrier    0 0
UUID=05891dd0-256a-4f7f-a2de-f1f858eb2a95 /data5                  ext4    noatime,nobarrier    0 0
UUID=77df1f77-0168-430e-96a3-f2eb44e15242 /data6                  ext4    noatime,nobarrier    0 0
UUID=e1f11339-ad68-44a1-a600-066094439ed2 /data7                  ext4    noatime,nobarrier    0 0
UUID=628f1658-d8f9-4573-a124-0712b0c29e90 /data8                  ext4    noatime,nobarrier    0 0
UUID=9ee336b0-3960-4cfd-9cb6-c92535f45ebd /data9                  ext4    noatime,nobarrier    0 0
UUID=bb6c1e2d-41b8-407d-b6df-df2e3ffc9c52 /data10                 ext4    noatime,nobarrier    0 0
UUID=9ca6aecf-e0f1-4338-a7eb-e8a1d2f3b017 /data11                 ext4    noatime,nobarrier    0 0
UUID=a5bf2880-4981-462a-8042-c6e913627c3d /data12                 ext4    noatime,nobarrier    0 0

最后将服务器通过"reboot"重启,重启之后查看磁盘及挂载状态,就能看到那10块磁盘的挂载情况
[root@data-node01 ~]# df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/sda3       793G  3.1G  750G   1% /
tmpfs            63G     0   63G   0% /dev/shm
/dev/sda1       380M   78M  282M  22% /boot
/dev/sdb1       1.8T   68M  1.7T   1% /data1
/dev/sdc1       1.8T   68M  1.8T   1% /data2
/dev/sdd        3.6T   68M  3.4T   1% /data3
/dev/sde        3.6T   68M  3.4T   1% /data4
/dev/sdf        3.6T   68M  3.4T   1% /data5
/dev/sdg        3.6T   68M  3.4T   1% /data6
/dev/sdh        3.6T   68M  3.4T   1% /data7
/dev/sdi        3.6T   68M  3.4T   1% /data8
/dev/sdj        3.6T   68M  3.4T   1% /data9
/dev/sdk        3.6T   68M  3.4T   1% /data10
/dev/sdl        3.6T   68M  3.4T   1% /data11
/dev/sdm        3.6T   68M  3.4T   1% /data12

[root@data-node01 ~]# mount 
/dev/sda3 on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sda1 on /boot type ext4 (rw)
/dev/sdb1 on /data1 type ext4 (rw)
/dev/sdc1 on /data2 type ext4 (rw)
/dev/sdd on /data3 type ext4 (rw,noatime,nobarrier)
/dev/sde on /data4 type ext4 (rw,noatime,nobarrier)
/dev/sdf on /data5 type ext4 (rw,noatime,nobarrier)
/dev/sdg on /data6 type ext4 (rw,noatime,nobarrier)
/dev/sdh on /data7 type ext4 (rw,noatime,nobarrier)
/dev/sdi on /data8 type ext4 (rw,noatime,nobarrier)
/dev/sdj on /data9 type ext4 (rw,noatime,nobarrier)
/dev/sdk on /data10 type ext4 (rw,noatime,nobarrier)
/dev/sdl on /data11 type ext4 (rw,noatime,nobarrier)
/dev/sdm on /data12 type ext4 (rw,noatime,nobarrier)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)

本文参与腾讯云自媒体分享计划,欢迎正在阅读的你也加入,一起分享。

我来说两句

0 条评论
登录 后参与评论

相关文章

  • 京东金融城市计算论文入选IJCAI 2018,郑宇解读地理传感器时间序列预测问题

    机器之心
  • 中兴智能视觉大数据报道:人工智能与大数据的区别?

    中兴智能视觉大数据报道:人工智能和大数据是人们耳熟能详的流行术语,但也可能会有一些混淆。人工智能和大数据有什么相似之处和不同之处?它们有什么共同点吗?它们是否相...

    用户2155938
  • 腾讯大数据沙龙(北京站):赋能运营,助力增长!

    腾讯大数据
  • 0基础学习大数据,你需要了解的学习路线和方向?

    现在大数据这么火,各行各业想转行大数据,那么问题来了,该往哪方面发展,哪方面最适合自己?

    用户2292346
  • 白硕:区块链技术与数据隐私(附视频)

    数据派THU
  • 不忘初心,砥砺前行——写在数据院成立四周年之际

    数据派THU
  • 如何像Facebook一样构建数据中心 – BGP在大规模数据中心中的应用(1)

    SDNLAB
  • 道阻且长,行则将至:搞科研,我们是认真的——数据院四周年系列报道之科研篇

    数据派THU
  • 大数据经典学习路线(及供参考)不容错过

    熟练使用Linux,熟练安装Linux上的软件,了解熟悉负载均衡、高可靠等集群相关概念,搭建互联网高并发、高可靠的服务架构;

    用户2292346
  • 腾讯SNG多维监控的进阶之路

    当我们有了能可靠地对大数据进行采集、处理和存储的能力后,我们可以将这些能力用于哪些实际业务场景,并让数据产生价值呢?

    织云平台团队

扫码关注云+社区

领取腾讯云代金券