首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >Android Vector曲折的兼容之路

Android Vector曲折的兼容之路

作者头像
用户1907613
发布2018-07-20 16:23:30
1.7K0
发布2018-07-20 16:23:30
举报
文章被收录于专栏:Android群英传Android群英传

Android Vector曲折的兼容之路

两年前写书的时候,就在研究Android L提出的Vector,可研究下来发现,完全不具备兼容性,相信这也是它没有被广泛使用的一个原因,经过Google的不懈努力,现在Vector终于迎来了它的春天。

4.jpg

在文章后面,会给出本文的Demo和效果图,并开源在Github

Vector Drawable

Android 5.0发布的时候,Google提供了Vector的支持。Vector Drawable相对于普通的Drawable来说,有以下几个好处:

  • Vector图像可以自动进行适配,不需要通过分辨率来设置不同的图片
  • Vector图像可以大幅减少图像的体积,同样一张图,用Vector来实现,可能只有PNG的几十分之一
  • 使用简单,很多设计工具,都可以直接导出SVG图像,从而转换成Vector图像
  • 功能强大,不用写很多代码就可以实现非常复杂的动画
  • 成熟、稳定,前端已经非常广泛的进行使用了

Vector图像刚发布的时候,是只支持Android 5.0+的,对于Android pre-L的系统来说,并不能使用,所以,可以说那时候的Vector并没有什么卵用。不过自从AppCompat 23.2之后,Google对p-View的Android系统也进行了兼容,也就是说,Vector可以使用于Android 2.1以上的所有系统,只需要引用com.android.support:appcompat-v7:23.2.0以上的版本就可以了,这时候,Vector应该算是迎来了它的春天。

如何获得Vector图像

概念

首先,需要讲解两个概念——SVG和Vector。

SVG,即Scalable Vector Graphics 矢量图,这种图像格式在前端中已经使用的非常广泛了,详见WIKI:https://en.wikipedia.org/wiki/Scalable_Vector_Graphics

Vector,在Android中指的是Vector Drawable,也就是Android中的矢量图,详见:https://developer.android.com/reference/android/graphics/drawable/VectorDrawable.html

因此,可以说Vector就是Android中的SVG实现,因为Android中的Vector并不是支持全部的SVG语法,也没有必要,因为完整的SVG语法是非常复杂的,但已经支持的SVG语法已经够用了,特别是Path语法,几乎是Android中Vector的标配,详细可以参考:http://www.w3.org/TR/SVG/paths.html

Vector语法简介

Android以一种简化的方式对SVG进行了兼容,这种方式就是通过使用它的Path标签,通过Path标签,几乎可以实现SVG中的其它所有标签,虽然可能会复杂一点,但这些东西都是可以通过工具来完成的,所以,不用担心写起来会很复杂。

Path指令解析如下所示:

  1. 支持的指令:
    • M = moveto(M X,Y) :将画笔移动到指定的坐标位置
    • L = lineto(L X,Y) :画直线到指定的坐标位置
    • H = horizontal lineto(H X):画水平线到指定的X坐标位置
    • V = vertical lineto(V Y):画垂直线到指定的Y坐标位置
    • C = curveto(C X1,Y1,X2,Y2,ENDX,ENDY):三次贝赛曲线
    • S = smooth curveto(S X2,Y2,ENDX,ENDY)
    • Q = quadratic Belzier curve(Q X,Y,ENDX,ENDY):二次贝赛曲线
    • T = smooth quadratic Belzier curveto(T ENDX,ENDY):映射
    • A = elliptical Arc(A RX,RY,XROTATION,FLAG1,FLAG2,X,Y):弧线
    • Z = closepath():关闭路径
  2. 使用原则:
    • 坐标轴为以(0,0)为中心,X轴水平向右,Y轴水平向下
    • 所有指令大小写均可。大写绝对定位,参照全局坐标系;小写相对定位,参照父容器坐标系
    • 指令和数据间的空格可以省略
    • 同一指令出现多次可以只用一个

注意,'M'处理时,只是移动了画笔, 没有画任何东西。 它也可以在后面给出上同时绘制不连续线。

关于这些语法,开发者需要的并不是全部精通,而是能够看懂即可,其它的都可以交给工具来实现。

从PNG到SVG

  • 设计师

要从一般使用的PNG图像转换到SVG图像,对于设计师来说,并不是一件难事,因为大部分的设计工具(PS、Illustrator等等)都支持导出各种格式的图像,如PNG、JPG,当然,也包括SVG,因此,设计师可以完全按照原有的方式进行设计,只是最后导出的时候,选择SVG即可。

  • 程序员

不要求开发者都去学习使用这些设计工具,开发者可以利用一些工具,自己转换一些比较基础的图像,http://inloop.github.io/svg2android/ 就是这样一个非常牛逼的网站,可以在线将普通图像转换为Android Vector Drawable。如图所示:

5.png

或者,还可以使用SVG的编辑器来进行SVG图像的编写,例如http://editor.method.ac/

6.png

使用Android Studio

利用Android Studio的Vector Asset,可以非常方便的创建Vector图像,甚至可以直接通过本地的SVG图像来生成Vector图像,如图所示:

2.png

进去之后,就可以生成Vector图像,如图所示:

3.png

Google的兼容之路

只兼容L+

Vector是在Android L中提出来的新概念,所以在刚开始的时候是只兼容L+的。

Gradle Plugin 1.5的兼容

从Gradle Plugin 1.5开始,Google支持了一种兼容方式,即在Android L之上,使用Vector,而在L之下,则使用Gradle将Vector生成PNG图像。

Android gradle plugin 1.5发布以后,加入了一个跟VectorDrawable有关的新功能。Android build tools 提供了另外一种解决兼容性的方案,如果编译的版本是5.0之前的版本,那么build tools 会把VectorDrawable生成对应的png图片,这样在5.0以下的版本则使用的是生成的png图,而在5.0以上的版本中则使用VectorDrawable.在build.gradle添加generatedDensities配置,可以配置生成的png图片的密度。

AppCompat23.2的兼容

从AppCompat23.2开始,Google开始支持在低版本上使用Vector。

静态Vector图像

我们有很多方法能够得到这些Vector,那么如何使用它们呢,Android 5.0以上的使用就不讲了,不太具有普遍代表性,我们从pre-L版本的兼容开始做起。

pre-L版本兼容

VectorDrawableCompat依赖于AAPT的一些功能,它能保持最近矢量图使用的添加的属性ID,以便他们可以被pre-L版本之前的引用。

在Android 5.0之前使用Vector,需要aapt来对资源进行一些处理,这一过程可以在aapt的配置中进行设置,如果没有启用这样一个flag,那么在5.0以下的设备上运行就会发生android.content.res.Resources$NotFoundException。

首先,你需要在项目的build.gradle脚本中,增加对Vector兼容性的支持,代码如下所示:

使用Gradle Plugin 2.0以上:

android {

    defaultConfig {
        vectorDrawables.useSupportLibrary = true
    }
}

使用Gradle Plugin 2.0以下,Gradle Plugin 1.5以上:

android {
  defaultConfig {    // Stops the Gradle plugin’s automatic rasterization of vectors
    generatedDensities = []
  }  // Flag to tell aapt to keep the attribute ids around
  aaptOptions {
    additionalParameters "--no-version-vectors"
  }
}

像前面提到的,这种兼容方式实际上是先关闭AAPT对pre-L版本使用Vector的妥协,即在L版本以上,使用Vector,而在pre-L版本上,使用Gradle生成相应的PNG图片,generatedDensities这个数组,实际上就是要生成PNG的图片分辨率的数组,使用appcompat后就不需要这样了。

当然,最重要的还是添加appcompat的支持:

compile 'com.android.support:appcompat-v7:23.4.0'

同时,确保你使用的是AppCompatActivity而不是普通的Activity。

Vector图像

一个基本的Vector图像,实际上也是一个xml文件,如下所示:

<vector xmlns:android="http://schemas.android.com/apk/res/android"
        android:width="200dp"
        android:height="200dp"
        android:viewportHeight="500"
        android:viewportWidth="500">

    <path
        android:name="square"
        android:fillColor="#000000"
        android:pathData="M100,100 L400,100 L400,400 L100,400 z"/></vector>

显示如图所示:

7.png

这里需要解释下这里的几个标签:

  • android:width \ android:height:定义图片的宽高
  • android:viewportHeight \ android:viewportWidth:定义图像被划分的比例大小,例如例子中的500,即把200dp大小的图像划分成500份,后面Path标签中的坐标,就全部使用的是这里划分后的坐标系统。

这样做有一个非常好的作用,就是将图像大小与图像分离,后面可以随意修改图像大小,而不需要修改PathData中的坐标。

  • android:fillColor:PathData中的这些属性就不详细讲了,与Canvas绘图的属性基本类似。

在控件中使用

有了静态的Vector图像,就可以在控件中使用了。

可以发现,这里我们使用的都是普通的ImageView,好像并不是AppcomatImageView,这是因为使用了Appcomat后,系统会自动把ImageView转换为AppcomatImageView。

ImageView\ImageButton

对于ImageView这样的控件,要兼容Vector图像,只需要将之前的android:src属性,换成app:srcCompat即可,示例代码如下所示:

<ImageView
    android:id="@+id/iv"
    android:layout_width="wrap_content"
    android:layout_height="wrap_content"
    app:srcCompat="@drawable/vector_image"/>

在代码中设置的话,代码如下所示:

ImageView iv = (ImageView) findViewById(R.id.iv);
iv.setImageResource(R.drawable.vector_image);

setBackgroundResource也是可以设置Vector的API

Button

Button并不能直接使用app:srcCompat来使用Vector图像,需要通过Selector来进行使用,首先,创建两个图像,用于Selector的两个状态,代码如下所示:

selector1.xml

<vector xmlns:android="http://schemas.android.com/apk/res/android"
        android:width="24dp"
        android:height="24dp"
        android:viewportHeight="24.0"
        android:viewportWidth="24.0">
    <path
        android:fillColor="#FF000000"
        android:pathData="M14.59,8L12,10.59 9.41,8 8,9.41 10.59,12 8,14.59 9.41,16 12,13.41 14.59,16 16,14.59 13.41,12 16,9.41 14.59,8zM12,2C6.47,2 2,6.47 2,12s4.47,10 10,10 10,-4.47 10,-10S17.53,2 12,2zM12,20c-4.41,0 -8,-3.59 -8,-8s3.59,-8 8,-8 8,3.59 8,8 -3.59,8 -8,8z"/></vector>

selector2.xml

<vector xmlns:android="http://schemas.android.com/apk/res/android"
        android:width="24dp"
        android:height="24dp"
        android:viewportHeight="24.0"
        android:viewportWidth="24.0">
    <path
        android:fillColor="#FF000000"
        android:pathData="M11,15h2v2h-2zM11,7h2v6h-2zM11.99,2C6.47,2 2,6.48 2,12s4.47,10 9.99,10C17.52,22 22,17.52 22,12S17.52,2 11.99,2zM12,20c-4.42,0 -8,-3.58 -8,-8s3.58,-8 8,-8 8,3.58 8,8 -3.58,8 -8,8z"/></vector>

selector.xml

<?xml version="1.0" encoding="utf-8"?><selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item android:drawable="@drawable/selector1" android:state_pressed="true"/>
    <item android:drawable="@drawable/selector2"/></selector>

非常简单,只是把普通的Selector中的图像换成了Vector图像而已,接下来,在Button中使用这个Selector即可:

<Button
    android:id="@+id/btn"
    android:layout_width="70dp"
    android:layout_height="70dp"
    android:background="@drawable/selector"/>

然后运行,如果你认为可以运行,那就是太天真了,都说了是兼容,怎么能没有坑呢,这里就是一个坑……

这个坑实际上是有历史渊源的,Google的一位开发者在博客中写到:

First up, this functionality was originally released in 23.2.0, but then we found some memory usage and Configuration updating issues so we it removed in 23.3.0. In 23.4.0 (technically a fix release) we’ve re-added the same functionality but behind a flag which you need to manually enable.

实际上,他们的这个改动,就影响了类似DrawableContainers(DrawableContainers which reference other drawables resources which contain only a vector resource)这样的类,它的一个典型,就是Selector(StateListDrawable也是)。这个开发者在文中提到的flag,就是下面的这段代码,放在Activity的前面就可以了:

static {
    AppCompatDelegate.setCompatVectorFromResourcesEnabled(true);
}

开启这个flag后,你就可以正常使用Selector这样的DrawableContainers了。同时,你还开启了类似android:drawableLeft这样的compound drawable的使用权限,以及RadioButton的使用权限,以及ImageView’s src属性。

RadioButton

RadioButton的Button同样可以定义,代码如下所示:

<RadioButton
    android:layout_width="50dp"
    android:layout_height="50dp"
    android:button="@drawable/selector"/>

动态Vector基础

动态Vector才是Android Vector Drawable的精髓所在

动态的Vector需要通过animated-vector标签来进行实现,它就像一个粘合剂,将控件与Vector图像粘合在了一起,一个基础的animated-vector代码如下所示:

<animated-vector
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:drawable="@drawable/XXXXX1">

    <target
        android:name="left"
        android:animation="@animator/XXXXX2"/></animated-vector>

实际上这里面只有两个重点是需要关注的,XXXXX1和XXXXX2。一个具体的示例如下所示:

<animated-vector
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:drawable="@drawable/ic_arrow">

    <target
        android:name="left"
        android:animation="@animator/anim_left"/>

    <target
        android:name="right"
        android:animation="@animator/anim_right"/></animated-vector>

这里表示目标图像是drawable/ic_arrow,对left、right分别使用了anim_left、anim_right动画。这里的name属性,就是在静态Vector图像中group或者path标签的name属性。

animated-vector标签在现在的Android Studio中实际上是会报错的,但这个并不影响编译和运行,属于Android Studio的Bug。

目标图像

XXXXX1是目标Vector图像,也就是静态的Vector图像,例如:

<vector xmlns:android="http://schemas.android.com/apk/res/android"
        android:width="120dp"
        android:height="120dp"
        android:viewportHeight="24.0"
        android:viewportWidth="24.0">

    <group android:name="left">
        <path
            android:fillColor="#FF000000"
            android:pathData="M9.01,14L2,14v2h7.01v3L13,15l-3.99,-4v3"/>
    </group>

    <group android:name="right">
        <path
            android:fillColor="#FF000000"
            android:pathData="M14.99,13v-3L22,10L22,8h-7.01L14.99,5L11,9l3.99,4"/>
    </group></vector>

可以发现,这里的Vector图像比之前我们看见的要多了一个group标签。group标签的作用有两个:

  • 对Path进行分组,由于我们后面需要针对Path进行动画,所以可以让具有同样动画效果的Path在同一个Group中
  • 拓展动画效果,单个的path标签是没有translateX和translateY属性的,因此无法使用属性动画来控制path translateY,而group标签是有的,所以我们需要先将相关的path标签元素包裹在一个个的group标签中.

动画效果

XXXXX2实际上就是模板要实现的动画,动画效果实际上就是基础的属性动画,例如:

anim_left.xml

<objectAnimator
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:duration="1000"
    android:interpolator="@android:interpolator/anticipate_overshoot"
    android:propertyName="translateX"
    android:repeatCount="infinite"
    android:repeatMode="reverse"
    android:valueFrom="0"
    android:valueTo="-10"
    android:valueType="floatType"/>

anim_right.xml

<objectAnimator
    xmlns:android="http://schemas.android.com/apk/res/android"
    android:duration="1000"
    android:interpolator="@android:interpolator/anticipate_overshoot"
    android:propertyName="translateX"
    android:repeatCount="infinite"
    android:repeatMode="reverse"
    android:valueFrom="0"
    android:valueTo="10"
    android:valueType="floatType"/>

在代码中使用

ImageView imageView = (ImageView) findViewById(R.id.iv);
AnimatedVectorDrawableCompat animatedVectorDrawableCompat = AnimatedVectorDrawableCompat.create(        this, R.drawable.square_anim);
imageView.setImageDrawable(animatedVectorDrawableCompat);
((Animatable) imageView.getDrawable()).start();

动态Vector兼容性问题

向下兼容问题

一说到兼容,就不得不提到坑,几乎所有的为了兼容而做的改动,都会留下一些不可填满的坑,动态Vector动画也不例外,虽然Google已经对Vector图像进行了Android 2.1以上的兼容,但对于动态Vector动画,还是有很多限制的,例如:

  • Path Morphing,即路径变换动画,在Android pre-L版本下是无法使用的。
  • Path Interpolation,即路径插值器,在Android pre-L版本只能使用系统的插值器,不能自定义。
  • Path Animation,即路径动画,这个一般使用贝塞尔曲线来代替,所以没有太大影响。

向上兼容问题

除了在低版本上的兼容性问题,在L版本以上,也存在兼容性问题,即继承了AppCompatActivity的界面,如果直接设置ImageView的srcCompat,那么Path Morphing动画是无法生效的,因为默认的AppCompatActivity已经默认使用ImageViewCompat给转换了,但是AnimatedVectorDrawableCompat是不支持Path Morphing动画的,所以,在AppCompatActivity界面里面就无效了。

解决办法很简单,即使用代码来给ImageView添加动画:

ImageView imageView = (ImageView) view;AnimatedVectorDrawable morphing = (AnimatedVectorDrawable) getDrawable(morphing);
imageView.setImageDrawable(morphing);if (morphing != null) {
    morphing.start();
}

注意不要使用AnimatedVectorDrawableCompat即可。

抽取string兼容问题

开发者有时候为了代码简洁可能会把Vector图像中的pathData放到string.xml中,然后在Vector图像中引用string。

但这种方式如果通过生成png来兼容5.0以下机型的话,会报pathData错误,编译器不会去读取string.xml,只能把pathData写到Vector图像中,动画文件中也是一样,这也是为了兼容做出的牺牲吗,不得而知。

其它兼容问题

其它非常奇怪、诡异、不能理解的兼容性问题,只能通过版本文件夹的方式来进行兼容了,例如drawable-v21和drawable,分别创建两个文件名相同的资源在两个文件夹下,这样在21以上版本,会使用drawable-v21的资源,而其它会使用drawable下的资源。

动态Vector进阶

用好ObjectAnimator

所谓Vector动画进阶,实际上就是在利用ObjectAnimator的一些属性,特别是trimPathStart、trimPathEnd这两个针对Vector的属性(要注意pathData属性不兼容pre-L)。

这两个属性的官方文档如下所示:

android:trimPathStart
The fraction of the path to trim from the start, in the range from 0 to 1.android:trimPathEnd
The fraction of the path to trim from the end, in the range from 0 to 1.android:trimPathOffset
Shift trim region (allows showed region to include the start and end), in the range from 0 to 1.

其实很简单,就是一个图像的截取,设置一个比例即可,即当前绘制多少比例的图像,其余部分不绘制,Start和End分别就是从PathData的Start和End开始算,大家参考几个例子就能理解了。

理解Path Morph

Path Morph动画是Vector动画的一个高级使用,说到底,也就是两个PathData的转换,但是这种转换并不是随心所欲的,对于两个PathData,它们能进行Path Morph的前提是,它们具有相同个数的关键点,即两个路径的变换,只是关键点的坐标变化,掌握了这一个基本原理,实现Path Morph就非常容易了。

学习Vector

在Github上我开源了一个Vector的动画Demo库,地址如下所示:

https://github.com/xuyisheng/VectorDemo

这个Demo分为两部分,一部分是可以兼容Android pre-L版本和L+版本的Vector动画,另一部分(通过Actionbar的按钮切换)是只能兼容L+的Vector动画。

每个Vector动画,基本都包含四部分内容,即:

  • Vector:图像资源
  • Animated-vector:动画、图像粘合剂
  • ObjectAnimator:动画资源
  • 代码:启动动画

每个Vector动画通过这四个部分去进行分析,就非常清晰了。

这里展示下Demo的效果图:

http://upload-images.jianshu.io/upload_images/1176696-7befad5f7a754d6d.gif?imageMogr2/auto-orient/strip

参考

https://medium.com/@shemag8/animated-vector-drawable-e4d7743d372c#.3vkt12j20 https://github.com/jpuderer/AnimatedButton

本文参与 腾讯云自媒体分享计划,分享自微信公众号。
原始发表:2016-07-06,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 群英传 微信公众号,前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体分享计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
目录
  • Android Vector曲折的兼容之路
    • Vector Drawable
      • 如何获得Vector图像
        • 概念
        • Vector语法简介
        • 从PNG到SVG
        • 使用Android Studio
      • Google的兼容之路
        • 只兼容L+
        • Gradle Plugin 1.5的兼容
        • AppCompat23.2的兼容
      • 静态Vector图像
        • pre-L版本兼容
        • Vector图像
        • 在控件中使用
      • 动态Vector基础
        • 目标图像
        • 动画效果
        • 在代码中使用
      • 动态Vector兼容性问题
        • 向下兼容问题
        • 向上兼容问题
        • 抽取string兼容问题
        • 其它兼容问题
      • 动态Vector进阶
        • 用好ObjectAnimator
        • 理解Path Morph
        • 学习Vector
      • 参考
      相关产品与服务
      容器服务
      腾讯云容器服务(Tencent Kubernetes Engine, TKE)基于原生 kubernetes 提供以容器为核心的、高度可扩展的高性能容器管理服务,覆盖 Serverless、边缘计算、分布式云等多种业务部署场景,业内首创单个集群兼容多种计算节点的容器资源管理模式。同时产品作为云原生 Finops 领先布道者,主导开源项目Crane,全面助力客户实现资源优化、成本控制。
      领券
      问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档