前往小程序,Get更优阅读体验!
立即前往
首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >如何在Redhat7.4安装CDH6.0

如何在Redhat7.4安装CDH6.0

作者头像
Fayson
发布2018-09-29 10:49:47
3.8K3
发布2018-09-29 10:49:47
举报
文章被收录于专栏:Hadoop实操

1.文档编写目的


Cloudera在前天8月30日,对外宣布正式发布Cloudera Enterprise 6,相关介绍可以参考Fayson昨天的文章《Cloudera Enterprise 6正式发布》。本文档Fayson主要描述如何在Redhat7.4安装CDH6.0。CDH6与CDH5的安装步骤一致,主要包括以下四部分:

1.安全前置准备,包括安装操作系统、关闭防火墙、同步服务器时钟等;

2.外部数据库如MySQL安装

3.安装Cloudera Manager;

4.安装CDH集群;

请务必注意CDH6的安装前置条件包括如下:

  • 外部数据库支持:

MySQL 5.7或更高

MariaDB 5.5或更高

PostgreSQL 8.4或更高

Oracle 12c或更高

  • JDK

Oracle JDK1.8,将不再支持JDK1.7

  • 操作系统支持

RHEL 6.8或更高

RHEL 7.2或更高

SLES 12 SP2或更高

Ubuntu 16或更高

  • 本次Fayson的测试环境为

1.CM和CDH版本为6.0

2.Redhat7.4

3.JDK1.8.0_141

4.MariaDB-5.5.56

5.root用户安装

2.前置准备

2.1.hostname及hosts配置


集群中各个节点之间能互相通信使用静态IP地址。IP地址和主机名通过/etc/hosts配置,主机名通过/etc/hostname进行配置。

以cm节点(172.31.6.83)为例:

  • hostname配置

/etc/hostname文件如下:

代码语言:javascript
复制
ip-172-31-6-83.ap-southeast-1.compute.internal

(可左右滑动)

或者你可以通过命令修改立即生效

代码语言:javascript
复制
[root@ip-172-31-6-83 ~]$ hostnamectl set-hostname ip-172-31-6-83.ap-southeast-1.compute.internal

(可左右滑动)

注意:这里修改hostname跟REDHAT6的区别

  • hosts配置

/etc/hosts文件如下:

代码语言:javascript
复制
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

172.31.6.83 ip-172-31-6-83.ap-southeast-1.compute.internal
172.31.12.142 ip-172-31-12-142.ap-southeast-1.compute.internal
172.31.9.113 ip-172-31-9-113.ap-southeast-1.compute.internal
172.31.4.105 ip-172-31-4-105.ap-southeast-1.compute.internal

(可左右滑动)

以上两步操作,在集群中其它节点做相应配置。确认需要安装的4台主机的hosts文件:

2.2.禁用SELinux


在所有节点执行setenforce 0 命令,此处使用批处理shell执行:

代码语言:javascript
复制
[root@ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "setenforce 0"

(可左右滑动)

集群所有节点修改/etc/selinux/config文件如下:

代码语言:javascript
复制
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected. 
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

(可左右滑动)

2.3.关闭防火墙


集群所有节点执行 systemctl stop命令,此处通过shell批量执行命令如下:

代码语言:javascript
复制
[root@ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "systemctl stop firewalld"
[root@ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "systemctl disable firewalld"
[root@ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "systemctl status firewalld"

(可左右滑动)

2.4.集群时钟同步


在Redhat7.x的操作系统上,已经默认的安装了chrony,我们这里先卸载chrony,然后安装ntp。使用ntp来配置各台机器的时钟同步,将cm(172.31.6.83)服务作为本地ntp服务器,其它3台服务器与其保持同步。

1.所有机器卸载chrony

代码语言:javascript
复制
[root@ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "yum -y remove chrony"

(可左右滑动)

2.所有机器安装ntp

代码语言:javascript
复制
[root@ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "yum -y install ntp"

(可左右滑动)

3.cm机器配置时钟与自己同步

代码语言:javascript
复制
[root@ ip-172-31-6-83 shell]# vim /etc/ntp.conf
#server 0.rhel.pool.ntp.org iburst
#server 1.rhel.pool.ntp.org iburst
#server 2.rhel.pool.ntp.org iburst
#server 3.rhel.pool.ntp.org iburst
server  127.127.1.0     # local clock
fudge   127.127.1.0 stratum 10

(可左右滑动)

4.集群其它节点,配置找cm机器去同步

代码语言:javascript
复制
#server 0.rhel.pool.ntp.org iburst
#server 1.rhel.pool.ntp.org iburst
#server 2.rhel.pool.ntp.org iburst
#server 3.rhel.pool.ntp.org iburst
server 172.31.6.83

(可左右滑动)

5.重启所有机器的ntp服务

代码语言:javascript
复制
[root@ ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "systemctl restart ntpd"
[root@ ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "systemctl status ntpd"

(可左右滑动)

6.验证始终同步,在所有节点执行ntpq -p命令,如下使用脚本批量执行

代码语言:javascript
复制
[root@ ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "ntpq -p"

(可左右滑动)

左边出现*号表示同步成功。

2.5.设置swap


所有节点执行

代码语言:javascript
复制
[root@ ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "echo vm.swappiness = 10 >> /etc/sysctl.conf"
[root@ ip-172-31-6-83 shell]# 

(可左右滑动)

2.6.设置透明大页面


所有节点执行:

代码语言:javascript
复制
[root@ ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list "echo never > /sys/kernel/mm/transparent_hugepage/defrag "
[root@ ip-172-31-6-83 shell]# sh ssh_do_all.sh node.list  "echo never > /sys/kernel/mm/transparent_hugepage/enabled"

(可左右滑动)

设置开机自关闭

将如下脚本添加到/etc/rc.d/rc.local文件中

代码语言:javascript
复制
if test -f /sys/kernel/mm/transparent_hugepage/enabled; then echo never > /sys/kernel/mm/transparent_hugepage/enabled fi if test -f /sys/kernel/mm/transparent_hugepage/defrag; then echo never > /sys/kernel/mm/transparent_hugepage/defrag fi

(可左右滑动)

同步到所有节点

2.7.配置操作系统repo


Fayson用的是AWS的环境,这步是可以省略的,放在这里供物理机部署的兄弟们参考。

  • 挂载操作系统iso文件
代码语言:javascript
复制
[ec2-user@ip-172-31-2-159 ~]$ sudo mkdir /media/DVD1
[ec2-user@ip-172-31-2-159 ~]$ sudo mount -o loop 
CentOS-7-x86_64-DVD-1611.iso /media/DVD1/

(可左右滑动)

  • 配置操作系统repo
代码语言:javascript
复制
[ec2-user@ip-172-31-2-159 ~]$ sudo vim /etc/yum.repos.d/local_os.repo
[local_iso]    
name=CentOS-$releasever - Media
baseurl=file:///media/DVD1
gpgcheck=0
enabled=1
[ec2-user@ip-172-31-2-159 ~]$ sudo yum repolist

(可左右滑动)

2.8.安装http服务


  • 安装httpd服务
代码语言:javascript
复制
[ec2-user@ip-172-31-2-159 ~]$ sudo yum -y install httpd

(可左右滑动)

  • 启动httpd服务
代码语言:javascript
复制
[ec2-user@ip-172-31-2-159 ~]$ sudo systemctl start httpd

(可左右滑动)

  • 安装完httpd后,重新制作操作系统repo,换成http的方式方便其它服务器也可以访问
代码语言:javascript
复制
[ec2-user@ip-172-31-2-159 ~]$ sudo mkdir /var/www/html/iso
[ec2-user@ip-172-31-2-159 ~]$ sudo scp -r /media/DVD1/* /var/www/html/iso/
[ec2-user@ip-172-31-2-159 ~]$ sudo vim /etc/yum.repos.d/os.repo 
[osrepo]
name=os_repo
baseurl=http://172.31.2.159/iso/
enabled=true
gpgcheck=false
[ec2-user@ip-172-31-2-159 ~]$ sudo yum repolist

(可左右滑动)

1.修改/etc/httpd/conf/httpd.conf配置文件,在<IfModule mime_module>中修改以下内容

代码语言:javascript
复制
AddType application/x-gzip .gz .tgz .parcel

(可左右滑动)

2.保存httpd.conf的修改,并重启httpd服务

代码语言:javascript
复制
[root@ip-172-31-6-83 java]# systemctl restart httpd

(可左右滑动)

2.9.安装MariaDB


1.安装MariaDB

代码语言:javascript
复制
[root@ ip-172-31-6-83 ~]# yum -y install mariadb
[root@ ip-172-31-6-83 ~]# yum -y install mariadb-server

(可左右滑动)

2.启动并配置MariaDB

代码语言:javascript
复制
[root@ ip-172-31-6-83 ~]# systemctl start mariadb
[root@ ip-172-31-6-83 ~]# /usr/bin/mysql_secure_installation

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user.  If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

Set root password? [Y/n] Y
New password: 
Re-enter new password: 
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] Y
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] n
 ... skipping.

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] Y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] Y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

(可左右滑动)

3.建立CM,Hive等需要的表

代码语言:javascript
复制
[root@ip-172-31-6-83 ~]# mysql -u root -p
Enter password: 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 9
Server version: 5.5.56-MariaDB MariaDB Server

Copyright (c) 2000, 2017, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

MariaDB [(none)]> 

create database metastore default character set utf8;  CREATE USER 'hive'@'%' IDENTIFIED BY 'password';   GRANT ALL PRIVILEGES ON metastore. * TO 'hive'@'%';   FLUSH PRIVILEGES;  create database cm default character set utf8;  CREATE USER 'cm'@'%' IDENTIFIED BY 'password';   GRANT ALL PRIVILEGES ON cm. * TO 'cm'@'%';   FLUSH PRIVILEGES;  create database am default character set utf8;   CREATE USER 'am'@'%' IDENTIFIED BY 'password';    GRANT ALL PRIVILEGES ON am. * TO 'am'@'%';    FLUSH PRIVILEGES;      create database rm default character set utf8;   CREATE USER 'rm'@'%' IDENTIFIED BY 'password';    GRANT ALL PRIVILEGES ON rm. * TO 'rm'@'%';    FLUSH PRIVILEGES;

create database hue default character set utf8;   CREATE USER 'hue'@'%' IDENTIFIED BY 'password';    GRANT ALL PRIVILEGES ON hue. * TO 'hue'@'%';    FLUSH PRIVILEGES;

create database oozie default character set utf8;   CREATE USER 'oozie'@'%' IDENTIFIED BY 'password';    GRANT ALL PRIVILEGES ON oozie. * TO 'oozie'@'%';    FLUSH PRIVILEGES;

create database sentry default character set utf8;   CREATE USER 'sentry'@'%' IDENTIFIED BY 'password';    GRANT ALL PRIVILEGES ON sentry. * TO 'sentry'@'%';    FLUSH PRIVILEGES;

create database nav_ms default character set utf8;   CREATE USER 'nav_ms'@'%' IDENTIFIED BY 'password';    GRANT ALL PRIVILEGES ON nav_ms. * TO 'nav_ms'@'%';    FLUSH PRIVILEGES;
create database nav_as default character set utf8;  
CREATE USER 'nav_as'@'%' IDENTIFIED BY 'password';   
GRANT ALL PRIVILEGES ON nav_as. * TO 'nav_as'@'%';   
FLUSH PRIVILEGES;

(可左右滑动)

  • 安装jdbc驱动
代码语言:javascript
复制
[root@ip-172-31-6-83 shell]# mkdir -p /usr/share/java/
[root@ip-172-31-6-83 ~]# mv mysql-connector-java-5.1.34.jar /usr/share/java/
[root@ip-172-31-6-83 ~]# cd /usr/share/java
[root@ip-172-31-6-83 java]# chmod 777 mysql-connector-java-5.1.34.jar
[root@ip-172-31-6-83 java]# ln -s mysql-connector-java-5.1.34.jar mysql-connector-java.jar
[root@ip-172-31-6-83 java]# ll
total 940
-rwxrwxrwx. 1 root root 960372 May 16 15:53 mysql-connector-java-5.1.34.jar
lrwxrwxrwx. 1 root root     31 May 16 15:53 mysql-connector-java.jar -> mysql-connector-java-5.1.34.jar

(可左右滑动)

3.Cloudera Manager安装

3.1.配置本地repo源


1.下载CM6.0的安装包,地址为:

代码语言:javascript
复制
https://archive.cloudera.com/cm6/6.0.0/redhat7/yum/RPMS/x86_64/cloudera-manager-agent-6.0.0-530873.el7.x86_64.rpm
https://archive.cloudera.com/cm6/6.0.0/redhat7/yum/RPMS/x86_64/cloudera-manager-daemons-6.0.0-530873.el7.x86_64.rpm
https://archive.cloudera.com/cm6/6.0.0/redhat7/yum/RPMS/x86_64/cloudera-manager-server-6.0.0-530873.el7.x86_64.rpm
https://archive.cloudera.com/cm6/6.0.0/redhat7/yum/RPMS/x86_64/cloudera-manager-server-db-2-6.0.0-530873.el7.x86_64.rpm
https://archive.cloudera.com/cm6/6.0.0/redhat7/yum/RPMS/x86_64/oracle-j2sdk1.8-1.8.0+update141-1.x86_64.rpm
https://archive.cloudera.com/cm6/6.0.0/allkeys.asc

(可左右滑动)

2.下载CDH6.0的安装包,地址为:

代码语言:javascript
复制
https://archive.cloudera.com/cdh6/6.0.0/parcels/CDH-6.0.0-1.cdh6.0.0.p0.537114-el7.parcel
https://archive.cloudera.com/cdh6/6.0.0/parcels/CDH-6.0.0-1.cdh6.0.0.p0.537114-el7.parcel.sha256
https://archive.cloudera.com/cdh6/6.0.0/parcels/manifest.json

(可左右滑动)

3.将Cloudera Manager安装需要的5个rpm包以及一个asc文件下载到本地,放在同一目录,执行createrepo命令生成rpm元数据。

代码语言:javascript
复制
[root@ip-172-31-6-83 cm6.0]# ll
total 1274736
-rw-r--r-- 1 root root      14041 Aug 29 13:49 allkeys.asc
-rw-r--r-- 1 root root   25903408 Aug 29 13:49 cloudera-manager-agent-6.0.0-530873.el7.x86_64.rpm
-rw-r--r-- 1 root root 1094489320 Aug 29 13:49 cloudera-manager-daemons-6.0.0-530873.el7.x86_64.rpm
-rw-r--r-- 1 root root       8148 Aug 29 13:49 cloudera-manager-server-6.0.0-530873.el7.x86_64.rpm
-rw-r--r-- 1 root root      11000 Aug 29 13:49 cloudera-manager-server-db-2-6.0.0-530873.el7.x86_64.rpm
-rw-r--r-- 1 root root  184888690 Aug 29 13:49 oracle-j2sdk1.8-1.8.0+update141-1.x86_64.rpm
drwxr-xr-x 2 root root       4096 Sep  1 11:43 repodata
[root@ip-172-31-6-83 cm6.0]# createrepo .
Spawning worker 0 with 2 pkgs
Spawning worker 1 with 1 pkgs
Spawning worker 2 with 1 pkgs
Spawning worker 3 with 1 pkgs
Workers Finished
Saving Primary metadata
Saving file lists metadata
Saving other metadata
Generating sqlite DBs
Sqlite DBs complete

(可左右滑动)

4.配置Web服务器

将上述cdh6.0 /cm6.0目录移动到/var/www/html目录下, 使得用户可以通过HTTP访问这些rpm包。

代码语言:javascript
复制
[root@ip-172-31-6-83 ~]# mv cdh6.0/ cm6.0/ /var/www/html/

(可左右滑动)

验证浏览器能否正常访问

5.制作Cloudera Manager的repo源

代码语言:javascript
复制
[root@ip-172-31-6-83 ~]# vim /etc/yum.repos.d/cm.repo
[cmrepo]
name = cm_repo
baseurl = baseurl=http://172.31.6.83/cm6.0
enable = true
gpgcheck = false
[root@ip-172-31-6-83 yum.repos.d]# yum repolist
Loaded plugins: amazon-id, rhui-lb, search-disabled-repos
Repodata is over 2 weeks old. Install yum-cron? Or run: yum makecache fast
repo id                                                                                    repo name                                                                                                 status
!cmrepo                                                                                    cm_repo                                                                                                        7
!rhui-REGION-client-config-server-7/x86_64                                                 Red Hat Update Infrastructure 2.0 Client Configuration Server 7                                                1
!rhui-REGION-rhel-server-releases/7Server/x86_64                                           Red Hat Enterprise Linux Server 7 (RPMs)                                                                  20,672
!rhui-REGION-rhel-server-rh-common/7Server/x86_64                                          Red Hat Enterprise Linux Server 7 RH Common (RPMs)                                                           233
repolist: 20,913

(可左右滑动)

6.验证安装JDK

代码语言:javascript
复制
[root@ip-172-31-6-83 yum.repos.d]# yum -y install  oracle-j2sdk1.8-1.8.0+update141-1.x86_64

(可左右滑动)

3.2.安装Cloudera Manager Server


1.通过yum安装Cloudera Manager Server

代码语言:javascript
复制
yum -y install cloudera-manager-server

(可左右滑动)

2.初始化数据库

代码语言:javascript
复制
 [root@ip-172-31-6-83 yum.repos.d]# /opt/cloudera/cm/schema/scm_prepare_database.sh mysql cm cm password
JAVA_HOME=/usr/local/jdk1.8.0_60
Verifying that we can write to /etc/cloudera-scm-server
Creating SCM configuration file in /etc/cloudera-scm-server
Executing:  /usr/local/jdk1.8.0_60/bin/java -cp /usr/share/java/mysql-connector-java.jar:/usr/share/java/oracle-connector-java.jar:/usr/share/java/postgresql-connector-java.jar:/opt/cloudera/cm/schema/../lib/* com.cloudera.enterprise.dbutil.DbCommandExecutor /etc/cloudera-scm-server/db.properties com.cloudera.cmf.db.
[                          main] DbCommandExecutor              INFO  Successfully connected to database.
All done, your SCM database is configured correctly!

(可左右滑动)

3.启动Cloudera Manager Server

代码语言:javascript
复制
[root@ ip-172-31-6-83 ~]# systemctl start cloudera-scm-server

(可左右滑动)

4.检查端口是否监听

代码语言:javascript
复制
[root@ip-172-31-6-83 share]# netstat -lnpt | grep 7180
tcp        0      0 0.0.0.0:7180            0.0.0.0:*               LISTEN      21257/java

(可左右滑动)

5.通过http://52.77.255.89:7180/cmf/login访问CM

4.CDH安装

4.1.CDH集群安装向导


1.admin/admin登录到CM

2.同意license协议,点击继续

3.选择60试用,点击继续

4.点击“继续”

5.点击“继续”,可以忽略这个自动TLS自动安装。

6.输入主机ip或者名称,点击搜索找到主机后点击继续

7.点击“继续”

8.使用Parcel选择,点击“更多选项”,点击“-”删除其它所有地址,输入

https://172.31.6.83/cdh6.0,点击“保存更改”

9.选择自定义存储库,输入cm的http地址

10.点击“继续”,进入下一步安装jdk

11.点击“继续”,进入下一步配置ssh账号密码

12.点击“继续”,进入下一步,安装Cloudera Manager相关到各个节点

等待agent安装完毕后,自动跳转到下一步开始分发parcel

13.点击“继续”,进入下一步安装cdh到各个节点

14.点击“继续”,进入下一步主机检查,确保所有检查项均通过。Fayson的机器因为有多个Java版本有一些警告,此步忽略。

点击完成进入服务安装向导。

4.2.集群设置安装向导


1.选择需要安装的服务

2.点击“继续”,进入集群角色分配

3.点击“继续”,进入下一步,测试数据库连接

4.测试成功,点击“继续”,进入目录设置,此处使用默认默认目录,根据实际情况进行目录修改

5.点击“继续”,进入各个服务启动

6.安装成功,点击继续

7.安装成功后进入home管理界面

4.3.组件版本检查


可以看到Hadoop3.0,Flume1.8,HBase2.0,Hive2.1,Spark2.2,Hue3.9,Impala3.0,Kafka1.0.0,Kudu1.6,Oozie5.0,Pig0.17,Senty2.0,Solr7.0,Sqoop1.4.7,Zookeeper3.4.5等。

5.总结


1.从安装方式上来看,CDH6与CDH5变化不大,这也方便了CDH5的用户可以较为快速的迁移到CDH6,以及适应CDH6的安装与使用。

2.安装向导界面有一些变化,现在可以一目了然的看到一共多少步骤,以及每个步骤是干什么。

3.安装条件前置没有任何变化,包括防火墙,Selinux关闭,ntp同步等等。可以参考Fayson之前的文章《CDH安装前置准备

4.进到主界面变化也不大,主要是Cloudera的logo变成了黑色,与Cloudera主页的整体风格一致。

5.在配置Cloudera Manager连接到数据库时的脚本有所变化。以前是/usr/share/cmf/schema/scm_prepare_database.sh,现在是/opt/cloudera/cm/schema/scm_prepare_database.sh

6.Cloudera Manager服务的状态在Redhat7通过systemctl status cloudera-scm-server查看是显示正确,而以前是不正确的,可以参考Fayson之前的文章《Cloudera Manager Server服务在RedHat7状态显示异常分析

7.Cloudera Manager的rpm安装包由之前的7个变成了5个,去掉了之前的JDK6的包,然后自带JDK1.8.0_141,将不再支持JDK1.7。

8.注意CM的安装除了下载rpm包以外,还要下载allkeys.asc文件,否则安装agent的时候会报以下错误:

9.对于离线安装CDH6.0,分发Parcel出现hash校验失败的问题,是因为在CM6中修复了一个bug,让它不再忽略由http服务器发送的“Content-Encoding”的header信息,但是我们在Redhat中安装的httpd服务,当它传输parcel文件时,默认会错误的设置“Content-Encoding”。于是CM server会错误的认为parcel文件已经被httpd压缩并尝试解压缩。所以会导致失败。解决办法是参考2.8章节的,设置httpd的conf文件,AddType application/x-gzip .gz .tgz .parcel,然后重启httpd服务和CM服务。这个问题在beta的时候就已经存在了,具体请参考《Redhat7.4安装CDH6.0_beta1时分发Parcel异常分析》

10.在安装过程中会有页面提示Auto-TLS,该步骤可以忽略,不过如果对主机通信或者CM页面访问有SSL/TLS需求的话,也可以按照提示进行配置。

11.更多CDH6相关Hadoop3组件的新功能,Fayson将在接下来的文章继续分享,欢迎大家持续关注。

本文参与 腾讯云自媒体同步曝光计划,分享自微信公众号。
原始发表:2018-09-01,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 Hadoop实操 微信公众号,前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体同步曝光计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
相关产品与服务
云数据库 MariaDB
腾讯云数据库 MariaDB(TencentDB for MariaDB) 让您轻松在云端部署、使用 MariaDB 数据库。MariaDB 是在 MySQL 版权被 Oracle 收购后,由 MySQL 创始人 Monty 创立,其版权授予了“MariaDB基金会(非营利性组织)”以保证 MariaDB 永远开源,良好的开源策略,是企业级应用的最优选择,主流开源社区系统/软件的数据库系统,均已默认配置 MariaDB。
领券
问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档