前往小程序,Get更优阅读体验!
立即前往
首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >使用 kubeadm 在 GCP 部署 Kubernetes

使用 kubeadm 在 GCP 部署 Kubernetes

作者头像
用户2443625
发布2019-01-02 10:19:38
2.2K0
发布2019-01-02 10:19:38
举报
文章被收录于专栏:blackpiglet

Kubernetes

0. 介绍

最近在准备 CKA 考试,所以需要搭建一个 Kubernetes 集群来方便练习.GCP 平台新用户注册送 300 刀体验金,所以就想到用 kubeadm 在 GCP 弄个练练手,既方便又省钱.

这一套做下来,还是比较容易上手的,kubeadm 提供的是傻瓜式的安装体验,所以难度主要还是在访问外国网站和熟悉 GCP 的命令上,接下来就详细记述一下如何操作.

1. 准备

接下来的操作都假设已经设置好了访问外国网站,由于政策原因,具体做法请自行搜索;而且已经注册好了 GCP 账户,链接如下:GCP

1.1 gcloud 安装和配置

首先需要在本地电脑上安装 GCP 命令行客户端:gcloud,参考链接为:gcloud

因为众所周知的原因,gcloud 要能正常使用,要设置代理才可以,下面是设置 SOCKS5 代理的命令:

代码语言:javascript
复制
# gcloud config set proxy/type PROXY_TYPE
$ gcloud config set proxy/type socks5
# gcloud config set proxy/address PROXY_IP_ADDRESS
$ gcloud config set proxy/address 127.0.0.1
# gcloud config set proxy/port PROXY_PORT
$ gcloud config set proxy/address 1080

如果是第一次使用 GCP,需要先进行初始化.在初始化的过程中会有几次交互,使用默认选项即可.由于之前已经设置了代理,网络代理相关部分就可以跳过了. 注意:在选择 region(区域)时,建议选择 us-west2,原因是目前大部分 GCP 的 region,体验用户只能最多创建四个虚拟机实例,只有少数几个区域可以创建六个,其中就包括 us-west2,正常来讲,搭建 Kubernetes 需要三个 master,三个 worker,四个不太够用,当然如果只是试试的话,两个节点,一主一从,也够用了.

代码语言:javascript
复制
$ gcloud init 
Welcome! This command will take you through the configuration of gcloud.

Settings from your current configuration [profile-name] are:
core:
  disable_usage_reporting: 'True'

Pick configuration to use:
 [1] Re-initialize this configuration [profile-name] with new settings 
 [2] Create a new configuration
 [3] Switch to and re-initialize existing configuration: [default]
Please enter your numeric choice:  3

Your current configuration has been set to: [default]

You can skip diagnostics next time by using the following flag:
  gcloud init --skip-diagnostics

Network diagnostic detects and fixes local network connection issues.
Checking network connection...done.                                                                                                                                                                               
ERROR: Reachability Check failed.
    Cannot reach https://www.google.com (ServerNotFoundError)
    Cannot reach https://accounts.google.com (ServerNotFoundError)
    Cannot reach https://cloudresourcemanager.googleapis.com/v1beta1/projects (ServerNotFoundError)
    Cannot reach https://www.googleapis.com/auth/cloud-platform (ServerNotFoundError)
    Cannot reach https://dl.google.com/dl/cloudsdk/channels/rapid/components-2.json (ServerNotFoundError)
Network connection problems may be due to proxy or firewall settings.

Current effective Cloud SDK network proxy settings:
    type = socks5
    host = PROXY_IP_ADDRESS
    port = 1080
    username = None
    password = None

What would you like to do?
 [1] Change Cloud SDK network proxy properties
 [2] Clear all gcloud proxy properties
 [3] Exit
Please enter your numeric choice:  1

Select the proxy type:
 [1] HTTP
 [2] HTTP_NO_TUNNEL
 [3] SOCKS4
 [4] SOCKS5
Please enter your numeric choice:  4

Enter the proxy host address: 127.0.0.1

Enter the proxy port: 1080

Is your proxy authenticated (y/N)?  N

Cloud SDK proxy properties set.

Rechecking network connection...done.                                                                                                                                                                             
Reachability Check now passes.
Network diagnostic (1/1 checks) passed.

You must log in to continue. Would you like to log in (Y/n)?  y

Your browser has been opened to visit:

    https://accounts.google.com/o/oauth2/auth?redirect_uri=......


已在现有的浏览器会话中创建新的窗口。


Updates are available for some Cloud SDK components.  To install them,
please run:
  $ gcloud components update

You are logged in as: [<gmail account>].

Pick cloud project to use: 
 [1] <project-id>
 [2] Create a new project
Please enter numeric choice or text value (must exactly match list 
item):  1

Your current project has been set to: [<project-id>].

Your project default Compute Engine zone has been set to [us-west2-b].
You can change it by running [gcloud config set compute/zone NAME].

Your project default Compute Engine region has been set to [us-west2].
You can change it by running [gcloud config set compute/region NAME].

Created a default .boto configuration file at [/home/<username>/.boto]. See this file and
[https://cloud.google.com/storage/docs/gsutil/commands/config] for more
information about configuring Google Cloud Storage.
Your Google Cloud SDK is configured and ready to use!

* Commands that require authentication will use <gmail account> by default
* Commands will reference project `<project-id>` by default
* Compute Engine commands will use region `us-west2` by default
* Compute Engine commands will use zone `us-west2-b` by default

Run `gcloud help config` to learn how to change individual settings

This gcloud configuration is called [default]. You can create additional configurations if you work with multiple accounts and/or projects.
Run `gcloud topic configurations` to learn more.

Some things to try next:

* Run `gcloud --help` to see the Cloud Platform services you can interact with. And run `gcloud help COMMAND` to get help on any gcloud command.
* Run `gcloud topic -h` to learn about advanced features of the SDK like arg files and output formatting

1.2 GCP 资源创建

接下来创建 Kuernetes 所需的 GCP 资源.

第一步是创建网络和子网.

代码语言:javascript
复制
$ gcloud compute networks create cka --subnet-mode custom
$ gcloud compute networks subnets create kubernetes --network cka --range 10.240.0.0/24

接下来要创建防火墙规则,配置哪些端口是可以开放访问的.一共两条规则,一个外网,一个内网. 外网规则只需要开放 ssh, ping 和 kube-api 的访问就足够了:

代码语言:javascript
复制
$ gcloud compute firewall-rules create cka-external --allow tcp:22,tcp:6443,icmp --network cka --source-ranges 0.0.0.0/0

内网规则设置好 GCP 虚拟机网段和后面 pod 的网段可以互相访问即可,因为后面会使用 calico 作为网络插件,所以只开放 TCP, UDP 和 ICMP 是不够的,还需要开放 BGP,但 GCP 的防火墙规则中没哟 BGP 选项,所以放开全部协议的互通.

代码语言:javascript
复制
$ gcloud compute firewall-rules create cka-internal --network cka --allow=all --source-ranges 192.168.0.0/16,10.240.0.0/16

最后创建 GCP 虚拟机实例.

代码语言:javascript
复制
$ gcloud compute instances create controller-1 --async --boot-disk-size 200GB --can-ip-forward --image-family ubuntu-1804-lts --image-project ubuntu-os-cloud --machine-type n1-standard-1 --private-network-ip 10.240.0.11 --scopes compute-rw,storage-ro,service-management,service-control,logging-write,monitoring --subnet kubernetes --tags cka,controller
$ gcloud compute instances create worker-1 --async --boot-disk-size 200GB --can-ip-forward --image-family ubuntu-1804-lts --image-project ubuntu-os-cloud --machine-type n1-standard-1 --private-network-ip 10.240.0.21 --scopes compute-rw,storage-ro,service-management,service-control,logging-write,monitoring --subnet kubernetes --tags cka,worker

2. 主节点配置

使用 gcloud 登录 controller-1

代码语言:javascript
复制
$ gcloud compute ssh controller-1
WARNING: The public SSH key file for gcloud does not exist.
WARNING: The private SSH key file for gcloud does not exist.
WARNING: You do not have an SSH key for gcloud.
WARNING: SSH keygen will be executed to generate a key.
Generating public/private rsa key pair.
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /home/<username>/.ssh/google_compute_engine.
Your public key has been saved in /home/<username>/.ssh/google_compute_engine.pub.
The key fingerprint is:
SHA256:jpaZtzz42t7FjB1JV06GeVHhXVi12LF/a+lfl7TK2pw <username>@<username>
The key's randomart image is:
+---[RSA 2048]----+
|               O&|
|              B=B|
|            ...*o|
|           . o  .|
|        S   o  .o|
|       *   = .. *|
|      *.o . =  *o|
|     ..+.o .+ = o|
|      .+*....E .o|
+----[SHA256]-----+
Updating project ssh metadata...⠧Updated [https://www.googleapis.com/compute/v1/projects/<project-id>].                                                                                                  
Updating project ssh metadata...done.                                                                                                                                                                             
Waiting for SSH key to propagate.
Warning: Permanently added 'compute.2329485573714771968' (ECDSA) to the list of known hosts.
Welcome to Ubuntu 18.04.1 LTS (GNU/Linux 4.15.0-1025-gcp x86_64)

 * Documentation:  https://help.ubuntu.com
 * Management:     https://landscape.canonical.com
 * Support:        https://ubuntu.com/advantage

  System information as of Wed Dec  5 03:05:31 UTC 2018

  System load:  0.0               Processes:           87
  Usage of /:   1.2% of 96.75GB   Users logged in:     0
  Memory usage: 5%                IP address for ens4: 10.240.0.11
  Swap usage:   0%


  Get cloud support with Ubuntu Advantage Cloud Guest:
    http://www.ubuntu.com/business/services/cloud

0 packages can be updated.
0 updates are security updates.


$ ssh -l<user-name> -i .ssh/google_compute_engine.pub 35.236.126.174

安装 kubeadm, docker, kubelet, kubectl.

代码语言:javascript
复制
$ sudo apt update
$ sudo apt upgrade -y
$ sudo apt-get install -y docker.io

代码语言:javascript
复制
$ sudo vim /etc/apt/sources.list.d/kubernetes.list
deb http://apt.kubernetes.io/ kubernetes-xenial main

代码语言:javascript
复制
$ curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo  apt-key add -
OK

代码语言:javascript
复制
$ sudo apt update
$ sudo apt-get install -y \
kubeadm=1.12.2-00 kubelet=1.12.2-00 kubectl=1.12.2-00

kubeadm 初始化

代码语言:javascript
复制
$ sudo kubeadm init --pod-network-cidr 192.168.0.0/16

配置 calico 网络插件

代码语言:javascript
复制
$ wget https://tinyurl.com/yb4xturm \
-O rbac-kdd.yaml
$ wget https://tinyurl.com/y8lvqc9g \
-O calico.yaml
$ kubectl apply -f rbac-kdd.yaml
$ kubectl apply -f calico.yaml

配置 kubectl 的 bash 自动补全.

代码语言:javascript
复制
$ source <(kubectl completion bash)
$ echo "source <(kubectl completion bash)" >> ~/.bashrc

3. 从节点配置

这里偷懒了一下,从节点安装的包和主节点一模一样,大家可以根据需求,去掉一些不必要的包.

代码语言:javascript
复制
$ sudo apt-get update && sudo apt-get upgrade -y
$ apt-get install -y docker.io

代码语言:javascript
复制
$ sudo vim /etc/apt/sources.list.d/kubernetes.list
deb http://apt.kubernetes.io/ kubernetes-xenial main

代码语言:javascript
复制
$ curl -s \
https://packages.cloud.google.com/apt/doc/apt-key.gpg \
| sudo apt-key add -
$ sudo apt-get update
$ sudo apt-get install -y \
kubeadm=1.12.2-00 kubelet=1.12.2-00 kubectl=1.12.2-00

如果此时 kubeadm init 命令中的 join 命令找不到了,或者 bootstrap token 过期了,该怎么办呢,下面就是解决方法.

代码语言:javascript
复制
$ sudo kubeadm token list
TOKEN TTL EXPIRES USAGES DESCRIPTION
27eee4.6e66ff60318da929 23h 2017-11-03T13:27:33Z
authentication,signing The default bootstrap token generated
by ’kubeadm init’....

$ sudo kubeadm token create
27eee4.6e66ff60318da929

$ openssl x509 -pubkey \
-in /etc/kubernetes/pki/ca.crt | openssl rsa \
-pubin -outform der 2>/dev/null | openssl dgst \
-sha256 -hex | sed ’s/^.* //’
6d541678b05652e1fa5d43908e75e67376e994c3483d6683f2a18673e5d2a1b0

最后执行 kubeadm join 命令.

代码语言:javascript
复制
$ sudo kubeadm join \
--token 27eee4.6e66ff60318da929 \
10.128.0.3:6443 \
--discovery-token-ca-cert-hash \
sha256:6d541678b05652e1fa5d43908e75e67376e994c3483d6683f2a18673e5d2a1b0

4. 参考文档

本文参与 腾讯云自媒体同步曝光计划,分享自作者个人站点/博客。
原始发表:2018.12.27 ,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 作者个人站点/博客 前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体同步曝光计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
目录
  • 0. 介绍
  • 1. 准备
    • 1.1 gcloud 安装和配置
      • 1.2 GCP 资源创建
      • 2. 主节点配置
      • 3. 从节点配置
      • 4. 参考文档
      相关产品与服务
      容器服务
      腾讯云容器服务(Tencent Kubernetes Engine, TKE)基于原生 kubernetes 提供以容器为核心的、高度可扩展的高性能容器管理服务,覆盖 Serverless、边缘计算、分布式云等多种业务部署场景,业内首创单个集群兼容多种计算节点的容器资源管理模式。同时产品作为云原生 Finops 领先布道者,主导开源项目Crane,全面助力客户实现资源优化、成本控制。
      领券
      问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档