首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >centos7 使用yum安装Apache、mariadb、PHP

centos7 使用yum安装Apache、mariadb、PHP

作者头像
阿dai学长
发布2019-04-03 11:14:26
1.1K0
发布2019-04-03 11:14:26
举报
文章被收录于专栏:阿dai_linux阿dai_linux

一、配置防火墙,开启80端口、3306端口

CentOS 7.0默认使用的是firewall作为防火墙,这里改为iptables防火墙。

1、关闭firewall:

systemctl stop firewalld.service #停止firewall

systemctl disable firewalld.service #禁止firewall开机启动

2、安装iptables防火墙

yum install iptables-services #安装

vi /etc/sysconfig/iptables #编辑防火墙配置文件

# Firewall configuration written by system-config-firewall

# Manual customization of this file is not recommended.

*filter

:INPUT ACCEPT [0:0]

:FORWARD ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

-A INPUT -p icmp -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT

-A INPUT -j REJECT --reject-with icmp-host-prohibited

-A FORWARD -j REJECT --reject-with icmp-host-prohibited

COMMIT

:wq! #保存退出

systemctl restart iptables.service #最后重启防火墙使配置生效

systemctl enable iptables.service #设置防火墙开机启动

二、关闭SELINUX

vi /etc/selinux/config

#SELINUX=enforcing #注释掉

#SELINUXTYPE=targeted #注释掉

SELINUX=disabled #增加

:wq! #保存退出

setenforce 0 #使配置立即生效

安装篇:

一、安装Apache

CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)
CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)

系统运维  www.111cn.net  温馨提醒:qihang01原创内容©版权所有,转载请注明出处及原文链

yum install httpd #根据提示,输入Y安装即可成功安装

systemctl start httpd.service #启动apache

systemctl stop httpd.service #停止apache

systemctl restart httpd.service #重启apache

systemctl enable httpd.service #设置apache开机启动

在客户端浏览器中打开服务器IP地址,会出现下面的界面,说明apache安装成功

CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)
CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)

系统运维  www.111cn.net  温馨提醒:qihang01原创内容©版权所有,转载请注明出处及原文链

二、安装MariaDB

CentOS 7.0中,已经使用MariaDB替代了MySQL数据库

1、安装MariaDB

CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)
CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)

yum install mariadb mariadb-server #询问是否要安装,输入Y即可自动安装,直到安装完成

systemctl start mariadb.service #启动MariaDB

systemctl stop mariadb.service #停止MariaDB

systemctl restart mariadb.service #重启MariaDB

systemctl enable mariadb.service #设置开机启动

cp /usr/share/mysql/my-huge.cnf /etc/my.cnf #拷贝配置文件(注意:如果/etc目录下面默认有一个my.cnf,直接覆盖即可)

2、为root账户设置密码

CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)
CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)

mysql_secure_installation

回车,根据提示输入Y

输入2次密码,回车

根据提示一路输入Y

最后出现:Thanks for using MySQL!

MySql密码设置完成,重新启动 MySQL:

systemctl restart mariadb.service #重启MariaDB

三、安装PHP

1、安装PHP

CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)
CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)

yum install php #根据提示输入Y直到安装完成

2、安装PHP组件,使PHP支持 MariaDB

yum install php-mysql php-gd libjpeg* php-ldap php-odbc php-pear php-xml php-xmlrpc php-mbstring php-bcmath php-mhash

#这里选择以上安装包进行安装,根据提示输入Y回车

systemctl restart mariadb.service #重启MariaDB

systemctl restart httpd.service #重启apache

配置篇

一、Apache配置

vi /etc/httpd/conf/httpd.conf #编辑文件

ServerSignature On  #添加,在错误页中显示Apache的版本,Off为不显示

Options Indexes FollowSymLinks  #修改为:Options Includes ExecCGI FollowSymLinks(允许服务器执行CGI及SSI,禁止列出目录)

#AddHandler cgi-script .cgi #修改为:AddHandler cgi-script .cgi .pl (允许扩展名为.pl的CGI脚本运行)

AllowOverride None  #修改为:AllowOverride All (允许.htaccess)

AddDefaultCharset UTF-8 #修改为:AddDefaultCharset GB2312 (添加GB2312为默认编码)

#Options Indexes FollowSymLinks   #修改为 Options FollowSymLinks(不在浏览器上显示树状目录结构)

DirectoryIndex index.html   #修改为:DirectoryIndex index.html index.htm Default.html Default.htmindex.php(设置默认首页文件,增加index.php)

MaxKeepAliveRequests 500  #添加MaxKeepAliveRequests 500 (增加同时连接数)

:wq! #保存退出

systemctl restart httpd.service #重启apache

rm -f /etc/httpd/conf.d/welcome.conf /var/www/error/noindex.html #删除默认测试页

二、php配置

vi /etc/php.ini #编辑

date.timezone = PRC #把前面的分号去掉,改为date.timezone = PRC

disable_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell_exec,proc_open,proc_get_status,ini_alter,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server,escapeshellcmd,dll,popen,disk_free_space,checkdnsrr,checkdnsrr,getservbyname,getservbyport,disk_total_space,posix_ctermid,posix_get_last_error,posix_getcwd, posix_getegid,posix_geteuid,posix_getgid, posix_getgrgid,posix_getgrnam,posix_getgroups,posix_getlogin,posix_getpgid,posix_getpgrp,posix_getpid, posix_getppid,posix_getpwnam,posix_getpwuid, posix_getrlimit, posix_getsid,posix_getuid,posix_isatty, posix_kill,posix_mkfifo,posix_setegid,posix_seteuid,posix_setgid, posix_setpgid,posix_setsid,posix_setuid,posix_strerror,posix_times,posix_ttyname,posix_uname

#列出PHP可以禁用的函数,如果某些程序需要用到这个函数,可以删除,取消禁用。

expose_php = Off #禁止显示php版本的信息

short_open_tag = ON #支持php短标签

open_basedir = .:/tmp/  #设置表示允许访问当前目录(即PHP脚本文件所在之目录)和/tmp/目录,可以防止php木马跨站,如果改了之后安装程序有问题(例如:织梦内容管理系统),可以注销此行,或者直接写上程序的目录/data/www.111cn.net/:/tmp/

:wq! #保存退出

systemctl restart mariadb.service #重启MariaDB

systemctl restart httpd.service #重启apache

测试篇

cd /var/www/html

vi index.php #输入下面内容

<?php

phpinfo();

?>

:wq! #保存退出

在客户端浏览器输入服务器IP地址,可以看到如下图所示相关的配置信息!

CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)
CentOS 7.0系统安装配置LAMP服务器(Apache+PHP+MariaDB)

注意:apache默认的程序目录是/var/www/html

权限设置:chown apache.apache -R /var/www/html  

(adsbygoogle = window.adsbygoogle || []).push({});

本文参与 腾讯云自媒体分享计划,分享自作者个人站点/博客。
原始发表:2017/08/01 ,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 作者个人站点/博客 前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体分享计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
相关产品与服务
数据库
云数据库为企业提供了完善的关系型数据库、非关系型数据库、分析型数据库和数据库生态工具。您可以通过产品选择和组合搭建,轻松实现高可靠、高可用性、高性能等数据库需求。云数据库服务也可大幅减少您的运维工作量,更专注于业务发展,让企业一站式享受数据上云及分布式架构的技术红利!
领券
问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档