前往小程序,Get更优阅读体验!
立即前往
首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >CentOS 7.2搭建FastDFS 分布式文件系统,实现高可用集群

CentOS 7.2搭建FastDFS 分布式文件系统,实现高可用集群

作者头像
庞小明
发布2019-05-25 17:57:37
7150
发布2019-05-25 17:57:37
举报
文章被收录于专栏:pangguomingpangguoming

分布式集群搭建结构

  • 双Tracker
  • 2组Group
  • 轮询存储策略
  • Keepalived+Nginx高可用
  • Nginx缓存
  • 4个存储节点

一、 集群规划清单

1.安装清单

软件名称

版本

百度云盘存放名称

FastDFS

5.11

fastdfs-5.11.zip

FastDFS-Nginx-module

fastdfs-nginx-module-master.zip

LibFastCommon

1.0.36

libfastcommon-1.0.36.zip

nginx

1.10.3

nginx-1.10.3.tar.gz

nginx-pure-cache

2.3

ngx_cache_purge-2.3.tar.gz

2.集群规划

虚拟机

IP

说明

Keepalived+Nginx1[Master]

192.168.43.101

Nginx Server 01

Keeepalived+Nginx[Backup]

192.168.43.102

Nginx Server 02

VIP

192.168.43.150

虚拟漂移IP

Tracker01

192.168.43.70

Tracker01服务器

Tracker02

192.168.43.71

Tracker02服务器

Storage01

192.168.43.72

Storage01服务器【group1】

Storage02

192.168.43.73

Storage02服务器【group1】

Storage03

192.168.43.74

Storage03服务器【group2】

Storage04

192.168.43.75

Storage04服务器【group2】

整体架构图如下图所示:

图片来源:CSDN作者 liuyazhuang

二、集群安装

以下操作均在关闭所有节点防火墙进行的,请根据个人情况开启相关端口或关闭防火墙

1.安装LibFastCommon/FastDFS模块

执行节点 Tracker01、Tracker02、Storage01、Storage03、Storage04

[root@localhost fastDFS]# unzip libfastcommon-1.0.36.zip 

解压后目录如下:

[root@localhost fastdfs-5.11]# ll
[root@localhost libfastcommon-1.0.36]# ll
总用量 32
drwxr-xr-x. 2 root root  117 4月   5 2017 doc
-rw-r--r--. 1 root root 8005 4月   5 2017 HISTORY
-rw-r--r--. 1 root root  566 4月   5 2017 INSTALL
-rw-r--r--. 1 root root 1606 4月   5 2017 libfastcommon.spec
-rwxr-xr-x. 1 root root 3099 4月   5 2017 make.sh
drwxr-xr-x. 2 root root  191 4月   5 2017 php-fastcommon
-rw-r--r--. 1 root root 2763 4月   5 2017 README
drwxr-xr-x. 3 root root 4096 1月  17 11:21 src

安装C编译工具 gcc

[root@localhost fastdfs-5.11]# yum -y install gcc-c++
  • 安装装LibFastCommon

编译libfastcommon软件并安装

[root@localhost fastdfs-5.11]# ./make.sh  && ./make.sh install

为libcommon 创建软链接到/usr/local/lib目录下

[root@localhost fastdfs-5.11]# ln -s /usr/lib64/libfastcommon.so /usr/local/lib/libfastcommon.so
[root@localhost fastdfs-5.11]# ln -s /usr/lib64/libfastcommon.so /usr/lib/libfastcommon.so
[root@localhost fastdfs-5.11]# ln -s /usr/lib64/libfdfsclient.so /usr/local/lib/libfdfsclient.so
[root@localhost fastdfs-5.11]# ln -s /usr/lib64/libfdfsclient.so /usr/lib/libfdfsclient.so
  • 安装FastDFS 解压安装包
[root@localhost fastDFS]# unzip fastdfs-5.11.zip 

进入解压目录并进行编译和安装

[root@localhost fastDFS]# cd fastdfs-5.11/
[root@localhost fastdfs-5.11]# ./make.sh  && ./make.sh install

安装成功后,FastDFS会安装在/etc/fdfs目录下:

[root@localhost fastdfs-5.11]# ll /etc/fdfs/
总用量 76
-rw-r--r--. 1 root root   316 1月  17 11:47 client.conf
-rw-r--r--. 1 root root  1461 1月  17 11:25 client.conf.sample
-rw-r--r--. 1 root root   955 1月  17 13:20 http.conf
-rw-r--r--. 1 root root 31172 1月  17 13:21 mime.types
-rw-r--r--. 1 root root  3716 1月  17 12:57 mod_fastdfs.conf
-rw-r--r--. 1 root root  1278 1月  17 11:40 storage.conf
-rw-r--r--. 1 root root  7927 1月  17 11:25 storage.conf.sample
-rw-r--r--. 1 root root   105 1月  17 11:25 storage_ids.conf.sample
-rw-r--r--. 1 root root  1356 1月  17 11:34 tracker.conf
-rw-r--r--. 1 root root  7389 1月  17 11:25 tracker.conf.sample

我们需要把这三个示例文件复制一份,去掉.sample

[root@localhost fdfs]# cp client.conf.sample client.conf
[root@localhost fdfs]# cp storage.conf.sample storage.conf
[root@localhost fdfs]# cp tracker.conf.sample tracker.conf

FastDFS安装结束

2.安装Tracker并实现节点信息配置

执行节点 Tracker01、Tracker02

  • 创建tracker工作目录

此目录用于保存tracker 的data和log

[root@localhost fdfs]# mkdir /opt/fastdfs_tracker
  • 配置tracker

配置 /etc/fdfs目录下tracker.conf 主要实现以下5个配置内容:

1.disabled=false 
2.port=22122 #默认端口号 
3.base_path=/opt/fastdfs_tracker #我刚刚创建的目录 
4.http.server_port=8080 #默认端口是8080
5.store_lookup=0  #采用轮询策略进行存储,0 轮询 1:始终定向到某个group 2:负载进行存储文件

完整tracker.conf 文件信息如下:

disabled=false

bind_addr= 0.0.0.0

port=22122

connect_timeout=30

network_timeout=60

base_path=/opt/fastdfs_tracker

max_connections=512

accept_threads=1

work_threads=4

min_buff_size = 8KB

max_buff_size = 128KB

store_lookup=0

store_group=group2

store_server=0

store_path=0

download_server=0

reserved_storage_space = 10%

log_level=info

run_by_group=

run_by_user=

allow_hosts=*

sync_log_buff_interval = 10

check_active_interval = 120

thread_stack_size = 64KB

storage_ip_changed_auto_adjust = true

storage_sync_file_max_delay = 86400

storage_sync_file_max_time = 300

use_trunk_file = false 

slot_min_size = 256

slot_max_size = 16MB

trunk_file_size = 64MB

trunk_create_file_advance = false

trunk_create_file_time_base = 02:00

trunk_create_file_interval = 86400

trunk_create_file_space_threshold = 20G

trunk_init_check_occupying = false

trunk_init_reload_from_binlog = false

trunk_compress_binlog_min_interval = 0

use_storage_id = false

storage_ids_filename = storage_ids.conf

id_type_in_filename = ip

store_slave_file_use_link = false

rotate_error_log = false

error_log_rotate_time=00:00

rotate_error_log_size = 0

log_file_keep_days = 0

use_connection_pool = false

connection_pool_max_idle_time = 3600

http.server_port=8080

http.check_alive_interval=30

http.check_alive_type=tcp

http.check_alive_uri=/status.html

修改保存后创建软引用

[root@localhost fdfs]# ln -s /usr/bin/fdfs_storaged /usr/local/bin
  • 启动tracker,并加入开机启动项
[root@localhost fdfs]# service fdfs_trackerd start

将tracker加入开机启动项

[root@localhost fdfs]# echo "service fdfs_trackerd start" |tee -a /etc/rc.d/rc.local
3.安装Storage模块并实现配置

执行节点 Storage01、Storage02、Storage03、Storage04

  • 建立存储目录

在存储各节点建了两个目录fastdfs_storage_data,fastdfs_storage

[root@localhost opt]# mkdir fastdfs_storage
[root@localhost opt]# mkdir fastdfs_storage_data
[root@localhost opt]# ll
总用量 0
drwxr-xr-x. 4 root root 30 1月  17 11:45 fastdfs_storage
drwxr-xr-x. 3 root root 18 1月  17 11:45 fastdfs_storage_data
drwxr-xr-x. 4 root root 30 1月  17 11:35 fastdfs_tracker
  • 修改存储节点目录下/etc/fdfs/storage.conf配置信息,具体如下:
disabled=false #启用配置文件  
group_name=group1 #组名(第一组为 group1, 第二组为 group2)  
port=23000 #storage 的端口号,同一个组的 storage 端口号必须相同  
base_path=/opt/fastdfs_storage #设置storage数据文件和日志目录 
store_path0=/opt/fastdfs_storage_data #实际文件存储路径  
store_path_count=1 #存储路径个数,需要和 store_path 个数匹配  
tracker_server=192.168.43.70:22122 #tracker 服务器的 IP 地址和端口  
tracker_server=192.168.43.70:22122 #多个 tracker 直接添加多条配置  
http.server_port=8888 #设置 http 端口号  

完整配置信息如下:

disabled=false
group_name=group1
bind_addr=
client_bind=true
port=23000
connect_timeout=30
network_timeout=60
heart_beat_interval=30
stat_report_interval=60
base_path=/opt/fastdfs_storage
max_connections=256
buff_size = 256KB
accept_threads=1
work_threads=4
disk_rw_separated = true
disk_reader_threads = 1
disk_writer_threads = 1
sync_wait_msec=50
sync_interval=0
sync_start_time=00:00
sync_end_time=23:59
write_mark_file_freq=500
store_path_count=1
store_path0=/opt/fastdfs_storage_data
subdir_count_per_path=256
tracker_server=192.168.43.70:22122
tracker_server=192.168.43.71:22122
log_level=info
run_by_group=
run_by_user=
allow_hosts=*
file_distribute_path_mode=0
file_distribute_rotate_count=100
fsync_after_written_bytes=0
sync_log_buff_interval=10
sync_binlog_buff_interval=10
sync_stat_file_interval=300
thread_stack_size=512KB
upload_priority=10
if_alias_prefix=
check_file_duplicate=0
file_signature_method=hash
key_namespace=FastDFS
keep_alive=0
use_access_log = false
rotate_access_log = false
access_log_rotate_time=00:00
rotate_error_log = false
error_log_rotate_time=00:00
rotate_access_log_size = 0
rotate_error_log_size = 0
log_file_keep_days = 0
file_sync_skip_invalid_record=false
use_connection_pool = false
connection_pool_max_idle_time = 3600
http.domain_name=
http.server_port=8888
  • 启动Storage 各节点配置好信息好之后,启动Storage
[root@localhost fdfs]# service fdfs_storaged start

启动后查看日志情况

[root@localhost fdfs]# fdfs_monitor /etc/fdfs/storage.conf
[2018-01-20 16:56:48] DEBUG - base_path=/opt/fastdfs_storage, connect_timeout=30, network_timeout=60, tracker_server_count=2, anti_steal_token=0, anti_steal_secret_key length=0, use_connection_pool=0, g_connection_pool_max_idle_time=3600s, use_storage_id=0, storage server id count: 0

server_count=2, server_index=0

tracker server is 192.168.43.70:22122

group count: 2

Group 1:
group name = group1
disk total space = 47073 MB
disk free space = 35162 MB
trunk free space = 0 MB
storage server count = 2
active server count = 2
storage server port = 23000
storage HTTP port = 8888
store path count = 1
subdir count per path = 256
current write server index = 0
current trunk file id = 0

    Storage 1:
        id = 192.168.43.72
        ip_addr = 192.168.43.72 (localhost.localdomain)  ACTIVE
        http domain = 
        version = 5.11
        join time = 2018-01-19 13:59:30
        up time = 2018-01-20 12:37:18
        total storage = 47073 MB
        free storage = 35162 MB
        upload priority = 10
        store_path_count = 1
        subdir_count_per_path = 256
        storage_port = 23000
        storage_http_port = 8888
        current_write_path = 0
        source storage id = 
        if_trunk_server = 0
        connection.alloc_count = 256
        connection.current_count = 1
        connection.max_count = 1
        total_upload_count = 3
        success_upload_count = 3
        total_append_count = 0
        success_append_count = 0
        total_modify_count = 0
        success_modify_count = 0
        total_truncate_count = 0
        success_truncate_count = 0
        total_set_meta_count = 0
        success_set_meta_count = 0
        total_delete_count = 0
        success_delete_count = 0
        total_download_count = 0
        success_download_count = 0
        total_get_meta_count = 0
        success_get_meta_count = 0
        total_create_link_count = 0
        success_create_link_count = 0
        total_delete_link_count = 0
        success_delete_link_count = 0
        total_upload_bytes = 791904
        success_upload_bytes = 791904
        total_append_bytes = 0
        success_append_bytes = 0
        total_modify_bytes = 0
        success_modify_bytes = 0
        stotal_download_bytes = 0
        success_download_bytes = 0
        total_sync_in_bytes = 775234
        success_sync_in_bytes = 775234
        total_sync_out_bytes = 0
        success_sync_out_bytes = 0
        total_file_open_count = 4
        success_file_open_count = 4
        total_file_read_count = 0
        success_file_read_count = 0
        total_file_write_count = 8
        success_file_write_count = 8
        last_heart_beat_time = 2018-01-20 16:56:18
        last_source_update = 2018-01-19 19:34:55
        last_sync_update = 2018-01-19 15:28:56
        last_synced_timestamp = 2018-01-19 15:28:48 (0s delay)
    Storage 2:
        id = 192.168.43.73
        ip_addr = 192.168.43.73  ACTIVE
        http domain = 
        version = 5.11
        join time = 2018-01-19 14:00:21
        up time = 2018-01-20 12:37:42
        total storage = 47073 MB
        free storage = 35166 MB
        upload priority = 10
        store_path_count = 1
        subdir_count_per_path = 256
        storage_port = 23000
        storage_http_port = 8888
        current_write_path = 0
        source storage id = 192.168.43.72
        if_trunk_server = 0
        connection.alloc_count = 256
        connection.current_count = 1
        connection.max_count = 1
        total_upload_count = 1
        success_upload_count = 1
        total_append_count = 0
        success_append_count = 0
        total_modify_count = 0
        success_modify_count = 0
        total_truncate_count = 0
        success_truncate_count = 0
        total_set_meta_count = 0
        success_set_meta_count = 0
        total_delete_count = 0
        success_delete_count = 0
        total_download_count = 0
        success_download_count = 0
        total_get_meta_count = 0
        success_get_meta_count = 0
        total_create_link_count = 0
        success_create_link_count = 0
        total_delete_link_count = 0
        success_delete_link_count = 0
        total_upload_bytes = 775234
        success_upload_bytes = 775234
        total_append_bytes = 0
        success_append_bytes = 0
        total_modify_bytes = 0
        success_modify_bytes = 0
        stotal_download_bytes = 0
        success_download_bytes = 0
        total_sync_in_bytes = 791904
        success_sync_in_bytes = 791904
        total_sync_out_bytes = 0
        success_sync_out_bytes = 0
        total_file_open_count = 4
        success_file_open_count = 4
        total_file_read_count = 0
        success_file_read_count = 0
        total_file_write_count = 8
        success_file_write_count = 8
        last_heart_beat_time = 2018-01-20 16:56:42
        last_source_update = 2018-01-19 15:28:48
        last_sync_update = 2018-01-19 19:34:59
        last_synced_timestamp = 2018-01-19 19:34:55 (0s delay)

Group 2:
group name = group2
disk total space = 47073 MB
disk free space = 35165 MB
trunk free space = 0 MB
storage server count = 2
active server count = 2
storage server port = 23000
storage HTTP port = 8888
store path count = 1
subdir count per path = 256
current write server index = 0
current trunk file id = 0

    Storage 1:
        id = 192.168.43.74
        ip_addr = 192.168.43.74  ACTIVE
        http domain = 
        version = 5.11
        join time = 2018-01-19 14:01:05
        up time = 2018-01-20 12:38:00
        total storage = 47073 MB
        free storage = 35165 MB
        upload priority = 10
        store_path_count = 1
        subdir_count_per_path = 256
        storage_port = 23000
        storage_http_port = 8888
        current_write_path = 0
        source storage id = 
        if_trunk_server = 0
        connection.alloc_count = 256
        connection.current_count = 1
        connection.max_count = 1
        total_upload_count = 4
        success_upload_count = 4
        total_append_count = 0
        success_append_count = 0
        total_modify_count = 0
        success_modify_count = 0
        total_truncate_count = 0
        success_truncate_count = 0
        total_set_meta_count = 0
        success_set_meta_count = 0
        total_delete_count = 0
        success_delete_count = 0
        total_download_count = 0
        success_download_count = 0
        total_get_meta_count = 0
        success_get_meta_count = 0
        total_create_link_count = 0
        success_create_link_count = 0
        total_delete_link_count = 0
        success_delete_link_count = 0
        total_upload_bytes = 2107770
        success_upload_bytes = 2107770
        total_append_bytes = 0
        success_append_bytes = 0
        total_modify_bytes = 0
        success_modify_bytes = 0
        stotal_download_bytes = 0
        success_download_bytes = 0
        total_sync_in_bytes = 1550468
        success_sync_in_bytes = 1550468
        total_sync_out_bytes = 0
        success_sync_out_bytes = 0
        total_file_open_count = 6
        success_file_open_count = 6
        total_file_read_count = 0
        success_file_read_count = 0
        total_file_write_count = 15
        success_file_write_count = 15
        last_heart_beat_time = 2018-01-20 16:56:38
        last_source_update = 2018-01-19 19:35:40
        last_sync_update = 2018-01-19 15:28:53
        last_synced_timestamp = 2018-01-19 15:28:50 (-1s delay)
    Storage 2:
        id = 192.168.43.75
        ip_addr = 192.168.43.75  ACTIVE
        http domain = 
        version = 5.11
        join time = 2018-01-19 14:01:27
        up time = 2018-01-20 12:38:20
        total storage = 47073 MB
        free storage = 35165 MB
        upload priority = 10
        store_path_count = 1
        subdir_count_per_path = 256
        storage_port = 23000
        storage_http_port = 8888
        current_write_path = 0
        source storage id = 192.168.43.74
        if_trunk_server = 0
        connection.alloc_count = 256
        connection.current_count = 1
        connection.max_count = 1
        total_upload_count = 2
        success_upload_count = 2
        total_append_count = 0
        success_append_count = 0
        total_modify_count = 0
        success_modify_count = 0
        total_truncate_count = 0
        success_truncate_count = 0
        total_set_meta_count = 0
        success_set_meta_count = 0
        total_delete_count = 0
        success_delete_count = 0
        total_download_count = 0
        success_download_count = 0
        total_get_meta_count = 0
        success_get_meta_count = 0
        total_create_link_count = 0
        success_create_link_count = 0
        total_delete_link_count = 0
        success_delete_link_count = 0
        total_upload_bytes = 1550468
        success_upload_bytes = 1550468
        total_append_bytes = 0
        success_append_bytes = 0
        total_modify_bytes = 0
        success_modify_bytes = 0
        stotal_download_bytes = 0
        success_download_bytes = 0
        total_sync_in_bytes = 2107770
        success_sync_in_bytes = 2107770
        total_sync_out_bytes = 0
        success_sync_out_bytes = 0
        total_file_open_count = 6
        success_file_open_count = 6
        total_file_read_count = 0
        success_file_read_count = 0
        total_file_write_count = 15
        success_file_write_count = 15
        last_heart_beat_time = 2018-01-20 16:56:23
        last_source_update = 2018-01-19 15:28:49
        last_sync_update = 2018-01-19 19:35:46
        last_synced_timestamp = 2018-01-19 19:35:40 (0s delay)

如果看到有2组Storage信息,则表示配置信息配置成功,并注册到Tracker中,查看日志启动情况

[root@localhost fdfs]# tail -f /opt/fastdfs_storage/logs/storaged.log 

[2018-01-20 12:37:18] INFO - FastDFS v5.11, base_path=/opt/fastdfs_storage, store_path_count=1, subdir_count_per_path=256, group_name=group1, run_by_group=, run_by_user=, connect_timeout=30s, network_timeout=60s, port=23000, bind_addr=, client_bind=1, max_connections=256, accept_threads=1, work_threads=4, disk_rw_separated=1, disk_reader_threads=1, disk_writer_threads=1, buff_size=256KB, heart_beat_interval=30s, stat_report_interval=60s, tracker_server_count=2, sync_wait_msec=50ms, sync_interval=0ms, sync_start_time=00:00, sync_end_time=23:59, write_mark_file_freq=500, allow_ip_count=-1, file_distribute_path_mode=0, file_distribute_rotate_count=100, fsync_after_written_bytes=0, sync_log_buff_interval=10s, sync_binlog_buff_interval=10s, sync_stat_file_interval=300s, thread_stack_size=512 KB, upload_priority=10, if_alias_prefix=, check_file_duplicate=0, file_signature_method=hash, FDHT group count=0, FDHT server count=0, FDHT key_namespace=, FDHT keep_alive=0, HTTP server port=8888, domain name=, use_access_log=0, rotate_access_log=0, access_log_rotate_time=00:00, rotate_error_log=0, error_log_rotate_time=00:00, rotate_access_log_size=0, rotate_error_log_size=0, log_file_keep_days=0, file_sync_skip_invalid_record=0, use_connection_pool=0, g_connection_pool_max_idle_time=3600s
[2018-01-20 12:37:18] INFO - file: storage_param_getter.c, line: 191, use_storage_id=0, id_type_in_filename=ip, storage_ip_changed_auto_adjust=1, store_path=0, reserved_storage_space=10.00%, use_trunk_file=0, slot_min_size=256, slot_max_size=16 MB, trunk_file_size=64 MB, trunk_create_file_advance=0, trunk_create_file_time_base=02:00, trunk_create_file_interval=86400, trunk_create_file_space_threshold=20 GB, trunk_init_check_occupying=0, trunk_init_reload_from_binlog=0, trunk_compress_binlog_min_interval=0, store_slave_file_use_link=0
[2018-01-20 12:37:18] INFO - file: storage_func.c, line: 257, tracker_client_ip: 192.168.43.72, my_server_id_str: 192.168.43.72, g_server_id_in_filename: 1210820800
[2018-01-20 12:37:18] INFO - file: tracker_client_thread.c, line: 310, successfully connect to tracker server 192.168.43.71:22122, as a tracker client, my ip is 192.168.43.72
[2018-01-20 12:37:18] INFO - file: tracker_client_thread.c, line: 1947, tracker server: #0. 192.168.43.70:22122, my_report_status: -1
[2018-01-20 12:37:18] INFO - file: tracker_client_thread.c, line: 310, successfully connect to tracker server 192.168.43.70:22122, as a tracker client, my ip is 192.168.43.72
[2018-01-20 12:37:18] INFO - file: tracker_client_thread.c, line: 1947, tracker server: #0. 192.168.43.70:22122, my_report_status: -1
[2018-01-20 12:37:48] INFO - file: tracker_client_thread.c, line: 1263, tracker server 192.168.43.71:22122, set tracker leader: 192.168.43.71:22122
[2018-01-20 12:37:48] INFO - file: storage_sync.c, line: 2732, successfully connect to storage server 192.168.43.73:23000

发现此时192.168.43.71作为Tracker的Leader。

  • 设置Storage开机自启动
[root@localhost fdfs]#  echo "service fdfs_storaged start" |tee -a /etc/rc.d/rc.local
  • 安装fastdfs-nginx-module、Nginx模块

安装Nginx模块所需的依赖环境

[root@localhost fdfs]# yum -y install pcre pcre-devel  
[root@localhost fdfs]# yum -y install zlib zlib-devel  
[root@localhost fdfs]# yum -y install openssl openssl-devel

解压nginx和fastdfs-nginx-module

[root@localhost fdfs]# tar -zxvf nginx-1.10.3.tar.gz
[root@localhost fdfs]# unzip fastdfs-nginx-module-master.zip

进入Nginx解压目录进行编译安装

[root@localhost nginx-1.10.3]# ./configure --prefix=/usr/local/nginx --add-module=/home/zhangyongliang/apps/fastdfs-nginx-module-master/src #解压后fastdfs-nginx-module所在的位置

安装成功后,nginx会安装在/usr/local/nginx,安装后查看

[root@localhost src]# ll /usr/local/nginx/
总用量 8
drwx------. 2 nobody root    6 1月  17 13:23 client_body_temp
drwxr-xr-x. 2 root   root 4096 1月  17 13:17 conf
drwx------. 2 nobody root    6 1月  17 13:23 fastcgi_temp
drwxr-xr-x. 2 root   root   40 1月  17 13:17 html
drwxr-xr-x. 2 root   root   58 1月  17 13:49 logs
-rw-r--r--. 1 root   root 1156 1月  17 13:29 nginx.conf
drwx------. 2 nobody root    6 1月  17 13:23 proxy_temp
drwxr-xr-x. 2 root   root   19 1月  17 13:17 sbin
drwx------. 2 nobody root    6 1月  17 13:23 scgi_temp
drwx------. 2 nobody root    6 1月  17 13:23 uwsgi_temp

安装成功后,nginx尚未运行时,nginx文件夹没有临时文件夹,例如fastcgi_temp这些文件。 复制 fastdfs-nginx-module 源码中的配置文件到/etc/fdfs 目录, 并修改

[root@localhost src]# cp /usr/local/src/fastdfs-nginx-module/src/mod_fastdfs.conf /etc/fdfs/  
[root@localhost src]# vi /etc/fdfs/mod_fastdfs.conf  
(1)第1组 Storage 的 mod_fastdfs.conf 配置如下:  
connect_timeout=10  
base_path=/opt/fastdfs_storage
tracker_server=192.168.1.131:22122  
tracker_server=192.168.1.132:22122  
storage_server_port=23000  
group_name=group1  
url_have_group_name = true  
store_path0=/opt/fastdfs_storage_data
group_count = 2  
[group1]  
group_name=group1  
storage_server_port=23000  
store_path_count=1  
store_path0=/opt/fastdfs_storage_data
[group2]  
group_name=group2  
storage_server_port=23000  
store_path_count=1  
store_path0=/opt/fastdfs_storage_data 
(2)第2组 Storage 的 mod_fastdfs.conf 配置与第一组配置只有 group_name 不同:  
group_name=group2  

完整信息如下:

# connect timeout in seconds
# default value is 30s
connect_timeout=2

# network recv and send timeout in seconds
# default value is 30s
network_timeout=30

# the base path to store log files
base_path=/opt/fastdfs_storage

# if load FastDFS parameters from tracker server
# since V1.12
# default value is false
load_fdfs_parameters_from_tracker=true

# storage sync file max delay seconds
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# since V1.12
# default value is 86400 seconds (one day)
storage_sync_file_max_delay = 86400

# if use storage ID instead of IP address
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# default value is false
# since V1.13
use_storage_id = false

# specify storage ids filename, can use relative or absolute path
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# since V1.13
storage_ids_filename = storage_ids.conf

# FastDFS tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
# valid only when load_fdfs_parameters_from_tracker is true
tracker_server=192.168.43.70:22122
tracker_server=192.168.43.71:22122

# the port of the local storage server
# the default value is 23000
storage_server_port=23000

# the group name of the local storage server
group_name=group1

# if the url / uri including the group name
# set to false when uri like /M00/00/00/xxx
# set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx
# default value is false
url_have_group_name = true

# path(disk or mount point) count, default value is 1
# must same as storage.conf
store_path_count=1

# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
# must same as storage.conf
store_path0=/opt/fastdfs_storage_data
#store_path1=/home/yuqing/fastdfs1

# standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info

# set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log
# empty for output to stderr (apache and nginx error_log file)
log_filename=

# response mode when the file not exist in the local file system
## proxy: get the content from other storage server, then send to client
## redirect: redirect to the original storage server (HTTP Header is Location)
response_mode=proxy

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# this paramter used to get all ip address of the local host
# default values is empty
if_alias_prefix=

# use "#include" directive to include HTTP config file
# NOTE: #include is an include directive, do NOT remove the # before include
#include http.conf


# if support flv
# default value is false
# since v1.15
flv_support = true

# flv file extension name
# default value is flv
# since v1.15
flv_extension = flv


# set the group count
# set to none zero to support multi-group on this storage server
# set to 0  for single group only
# groups settings section as [group1], [group2], ..., [groupN]
# default value is 0
# since v1.14
group_count = 2

# group settings for group #1
# since v1.14
# when support multi-group on this storage server, uncomment following section
[group1]
group_name=group1
storage_server_port=23000
store_path_count=1
store_path0=/opt/fastdfs_storage_data
[group2]
group_name=group2
storage_server_port=23000
store_path_count=1
store_path0=/opt/fastdfs_storage_data
# group settings for group #2
# since v1.14
# when support multi-group, uncomment following section as neccessary
#[group2]
#group_name=group2
#storage_server_port=23000
#store_path_count=1
#store_path0=/home/yuqing/fastdfs

复制 FastDFS 安装目录的部分配置文件到/etc/fdfs 目录

[root@localhost conf]# pwd
/home/zhangyongliang/apps/fastdfs-5.11/conf
[root@localhost conf]# cp http.conf  mime.types  /etc/fdfs/

创建M00至storage存储目录的符号连接:

ln  -s  /opt/fastdfs_storage_data/data/ /opt/fastdfs_storage_data/data/M00

配置 Nginx, 简洁版 nginx 配置样例

# vi /usr/local/nginx/conf/nginx.conf  
user root;  
worker_processes 1;  
events {  
    worker_connections 1024;  
}  
http {  
    include mime.types;  
    default_type application/octet-stream;  
    sendfile on;  
    keepalive_timeout 65;  
    server {  
        listen 8888;  
        server_name localhost;  
        location ~/group([0-9])/M00 {  
            #alias /fastdfs/storage/data;  
            ngx_fastdfs_module;  
        }  
        error_page 500 502 503 504 /50x.html;  
        location = /50x.html {  
            root html;  
        }  
    }  
}  

注意、 说明: 8888 端口值是要与/etc/fdfs/storage.conf 中的 http.server_port=8888 相对应,因为 http.server_port 默认为 8888,如果想改成 80,则要对应修改过来。 重新启动各节点的Nginx服务

[root@localhost conf]#/usr/local/nginx/sbin/nginx -s reload
4.文件上传测试

执行节点Tracker01、Tracker02 修改 Tracker 服务器中的客户端配置文件

# vi /etc/fdfs/client.conf  
base_path=/fastdfs/tracker  
tracker_server=192.168.43.70:22122  
tracker_server=192.168.43.71:22122  

执行如下文件上传命令

[root@localhost zhangyongliang]# fdfs_upload_file /etc/fdfs/client.conf P71022-205803.jpg 
group1/M00/00/00/wKgrSFpjC26AH1g2AAvUQrxXbkA557.jpg
[root@localhost zhangyongliang]# fdfs_upload_file /etc/fdfs/client.conf P71022-205803.jpg 
group2/M00/00/00/wKgrSlpjC3aAARrXAAvUQrxXbkA048.jpg

进行2次上传后,发现文件被均衡分到2个group。

5.Tracker安装Nginx、 ngx_cache_purge 模块
  • 安装编译 Nginx 所需的依赖包
[root@localhost zhangyongliang]# yum install gcc gcc-c++ make automake autoconf libtool pcre pcre-devel zlib zlib-devel openssl openssl-devel  

解压Nginx和ngx_cache_pure模块

[root@localhost apps]# tar ngx_cache_purge-2.3.tar.gz
[root@localhost apps]# tar nginx-1.10.3.tar.gz 

编译安装 Nginx(添加 ngx_cache_purge 模块)

[root@localhost apps]# cd nginx-1.13.0  
[root@localhost nginx-1.13.0# ./configure --prefix=/usr/local/nginx --add-module=/usr/local/src/ngx_cache_purge-2.3  
[root@localhost nginx-1.13.0]# make && make install 

配置 Nginx, 设置负载均衡以及缓存

# vi /usr/local/nginx/conf/nginx.conf  

#user  nobody;
worker_processes  1;

#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

#pid        logs/nginx.pid;


events {
    worker_connections  1024;
}


http {
    include       mime.types;
    default_type  application/octet-stream;

    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
    #                  '$status $body_bytes_sent "$http_referer" '
    #                  '"$http_user_agent" "$http_x_forwarded_for"';

    #access_log  logs/access.log  main;
    sendfile        on;  
    tcp_nopush      on;  
    #tcp_nopush     on;
    #keepalive_timeout  0;
    keepalive_timeout  65;

    #gzip  on;
    #设置缓存  
    server_names_hash_bucket_size 128;  
    client_header_buffer_size 32k;  
    large_client_header_buffers 4 32k;  
    client_max_body_size 300m;  
  
    proxy_redirect off;  
    proxy_set_header Host $http_host;  
    proxy_set_header X-Real-IP $remote_addr;  
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;  
    proxy_connect_timeout 90;  
    proxy_send_timeout 90;  
    proxy_read_timeout 90;  
    proxy_buffer_size 16k;  
    proxy_buffers 4 64k;  
    proxy_busy_buffers_size 128k;  
    proxy_temp_file_write_size 128k;
    #设置缓存存储路径,存储方式,分别内存大小,磁盘最大空间,缓存期限  
    proxy_cache_path /opt/fastdfs_tracker/proxy_cache levels=1:2 
    keys_zone=http-cache:200m max_size=1g inactive=30d;
    proxy_temp_path /opt/fastdfs_tracker/tmp;
    #group1的服务设置  
    upstream fdfs_group1 {  
         server 192.168.43.72:8888 weight=1 max_fails=2 fail_timeout=30s;  
         server 192.168.43.73:8888 weight=1 max_fails=2 fail_timeout=30s;  
    }
    #group2的服务设置  
    upstream fdfs_group2 {  
         server 192.168.43.74:8888 weight=1 max_fails=2 fail_timeout=30s;  
         server 192.168.43.75:8888 weight=1 max_fails=2 fail_timeout=30s;  
    }
    
    server {
        listen       8000;
        server_name  localhost;

        #charset koi8-r;

        #access_log  logs/host.access.log  main;
        #group1的负载均衡配置  
        location /group1/M00 {  
            proxy_next_upstream http_502 http_504 error timeout invalid_header;  
            proxy_cache http-cache;  
            proxy_cache_valid 200 304 12h;  
            proxy_cache_key $uri$is_args$args;  
            #对应group1的服务设置  
            proxy_pass http://fdfs_group1;  
            expires 30d;  
        }
        location /group2/M00 {  
            proxy_next_upstream http_502 http_504 error timeout invalid_header;  
            proxy_cache http-cache;  
            proxy_cache_valid 200 304 12h;  
            proxy_cache_key $uri$is_args$args;  
            #对应group2的服务设置  
            proxy_pass http://fdfs_group2;  
            expires 30d;  
         }
        location ~/purge(/.*) {  
            allow 127.0.0.1;  
            allow 192.168.43.0/24;  
            deny all;  
            proxy_cache_purge http-cache $1$is_args$args;  
        }        
        location / {
            root   html;
            index  index.html index.htm;
        }

        #error_page  404              /404.html;

        # redirect server error pages to the static page /50x.html
        #
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #
        #location ~ \.php$ {
        #    proxy_pass   http://127.0.0.1;
        #}

        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #
        #location ~ \.php$ {
        #    root           html;
        #    fastcgi_pass   127.0.0.1:9000;
        #    fastcgi_index  index.php;
        #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
        #    include        fastcgi_params;
        #}

        # deny access to .htaccess files, if Apache's document root
        # concurs with nginx's one
        #
        #location ~ /\.ht {
        #    deny  all;
        #}
    }


    # another virtual host using mix of IP-, name-, and port-based configuration
    #
    #server {
    #    listen       8000;
    #    listen       somename:8080;
    #    server_name  somename  alias  another.alias;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}


    # HTTPS server
    #
    #server {
    #    listen       443 ssl;
    #    server_name  localhost;

    #    ssl_certificate      cert.pem;
    #    ssl_certificate_key  cert.key;

    #    ssl_session_cache    shared:SSL:1m;
    #    ssl_session_timeout  5m;

    #    ssl_ciphers  HIGH:!aNULL:!MD5;
    #    ssl_prefer_server_ciphers  on;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}

}

根据Nginx配置,创建对应目录下的文件夹

[root@localhost fastdfs_tracker]# mkdir proxy_cache tmp
[root@localhost fastdfs_tracker]# ll
总用量 0
drwxr-xr-x. 2 root   root 178 1月  20 12:37 data
drwxr-xr-x. 2 root   root  26 1月  19 12:01 logs
drwxr-xr-x. 7 nobody root  51 1月  19 19:35 proxy_cache
drwxr-xr-x. 2 nobody root   6 1月  19 19:35 tmp

重启Nginx进行访问测试

重启 Nginx  
[root@localhost fastdfs_tracker]# /usr/local/nginx/sbin/nginx -s reload 

前面直接通过访问 Storage 节点中的 Nginx 的文件

本文参与 腾讯云自媒体分享计划,分享自作者个人站点/博客。
原始发表:2019-05-09 ,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 作者个人站点/博客 前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体分享计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
目录
  • 分布式集群搭建结构
  • 一、 集群规划清单
  • 二、集群安装
    • 2.安装Tracker并实现节点信息配置
    相关产品与服务
    负载均衡
    负载均衡(Cloud Load Balancer,CLB)提供安全快捷的流量分发服务,访问流量经由 CLB 可以自动分配到云中的多台后端服务器上,扩展系统的服务能力并消除单点故障。负载均衡支持亿级连接和千万级并发,可轻松应对大流量访问,满足业务需求。
    领券
    问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档