首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >Android自定义控件:一款多特效的智能loadingView

Android自定义控件:一款多特效的智能loadingView

原创
作者头像
CCCruch
修改2019-07-23 09:47:53
6650
修改2019-07-23 09:47:53
举报
先上效果图(如果感兴趣请看后面讲解):
1、登录效果展示
2、关注效果展示
1、【画圆角矩形】

画图首先是onDraw方法(我会把圆代码写上,一步一步剖析):

首先在view中定义个属性:private RectF rectf = new RectF();//可以理解为,装载控件按钮的区域

rectf.left = current_left;
rectf.top = 0;      //(这2点确定空间区域左上角,current_left,是为了后面动画矩形变成等边矩形准备的,这里你可以看成0)  
rectf.right = width - current_left; 
rectf.bottom = height;       //(通过改变current_left大小,更新绘制,就会实现了动画效果)
//画圆角矩形 
//参数1:区域
//参数2,3:圆角矩形的圆角,其实就是矩形圆角的半径
//参数4:画笔
canvas.drawRoundRect(rectf, circleAngle, circleAngle, paint);
2、【确定控件的大小】

上面是画圆角,那width和height怎么来呢当然是通过onMeasure;

@Override
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
    height = measuredHeight(heightMeasureSpec);  //这里是测量控件大小
    width = measureWidth(widthMeasureSpec);  //我们经常可以看到我们设置控件wrap_content,match_content或者固定值
    setMeasuredDimension(width, height);
}

下面以measureWidth为例:

private int measureWidth(int widthMeasureSpec) {
        int result;
        int specMode = MeasureSpec.getMode(widthMeasureSpec);
        int specSize = MeasureSpec.getSize(widthMeasureSpec);
        //这里是精准模式,比如match_content,或者是你控件里写明了控件大小
        if (specMode == MeasureSpec.EXACTLY) {
            result = specSize;
        } else {
            //这里是wrap_content模式,其实这里就是给一个默认值
            //下面这段注销代码是最开始如果用户不设置大小,给他一个默认固定值。这里以字体长度来决定更合理
            //result = (int) getContext().getResources().getDimension(R.dimen.dp_150);
            //这里是我设置的长度,当然你写自定义控件可以设置你想要的逻辑,根据你的实际情况
            result = buttonString.length() * textSize + height * 5 / 3;
            if (specMode == MeasureSpec.AT_MOST) {
                result = Math.min(result, specSize);
            }
        }
        return result;
    }
3、【绘制文字text】

这里我是用自己的方式实现:当文字长度超过控件长度时,文字需要来回滚动。所以自定义控件因为你需要什么样的功能可以自己去实现(当然这个方法也是在onDraw里,为什么这么个顺序讲,目的希望我希望你能循序渐进的理解,如果你觉得onDraw方代码太杂,你可以用个方法独立出去,你可以跟作者一样用private void drawText(Canvas canvas) {}),

//绘制文字的路径(文字过长时,文字来回滚动需要用到)
private Path textPath = new Path():
textRect.left = 0;
textRect.top = 0;
textRect.right = width;
textRect.bottom = height; //这里确定文字绘制区域,其实就是控件区域
Paint.FontMetricsInt fontMetrics = textPaint.getFontMetricsInt();
//这里是获取文字绘制的y轴位置,可以理解上下居中
int baseline = (textRect.bottom + textRect.top - fontMetrics.bottom - fontMetrics.top) / 2;
//这里判断文字长度是否大于控件长度,当然我控件2边需要留文字的间距,所以不是大于width,这么说只是更好的理解
//这里是当文字内容大于控件长度,启动回滚效果。建议先看下面else里的正常情况
if ((buttonString.length() * textSize) > (width - height * 5 / 3)) {
    textPath.reset();
    //因为要留2遍间距,以heigh/3为间距
    textPath.moveTo(height / 3, baseline);
    textPath.lineTo(width - height / 3, baseline);
    //这里的意思是文字从哪里开始写,可以是居中,这里是右边
    textPaint.setTextAlign(Paint.Align.RIGHT);
    //这里是以路径绘制文字,scrollSize可以理解为文字在x轴上的便宜量,同时,我的混动效果就是通过改变scrollSize
    //刷新绘制来实现
    canvas.drawTextOnPath(buttonString, textPath, scrollSize, 0, textPaint);
    if (isShowLongText) {
        //这里是绘制遮挡物,因为绘制路径没有间距这方法,所以绘制遮挡物类似于间距方式
        canvas.drawRect(new Rect(width - height / 2 - textSize / 3, 0, width - height / 2, height),paintOval);
        canvas.drawRect(new Rect(height / 2, 0, height / 2 + textSize / 3, height), paintOval);
        //这里有个bug 有个小点-5  因画笔粗细产生
        canvas.drawArc(new RectF(width - height, 0, width - 5, height), -90, 180, true, paintOval);
        canvas.drawArc(new RectF(0, 0, height, height), 90, 180, true, paintOval);
    }

    if (animator_text_scroll == null) { 
        //这里是计算混到最右边和最左边的距离范围
        animator_text_scroll = ValueAnimator.ofInt(buttonString.length() * textSize - width + height * 2 / 3,-textSize);
        //这里是动画的时间,scrollSpeed可以理解为每个文字滚动控件外所需的时间,可以做成控件属性提供出去 
        animator_text_scroll.setDuration(buttonString.length() * scrollSpeed);
        //设置动画的模式,这里是来回滚动
        animator_text_scroll.setRepeatMode(ValueAnimator.REVERSE);
        //设置插值器,让整个动画流畅
        animator_text_scroll.setInterpolator(new LinearInterpolator());
        //这里是滚动次数,-1无限滚动
        animator_text_scroll.setRepeatCount(-1);
        animator_text_scroll.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
            @Override
            public void onAnimationUpdate(ValueAnimator animation) {
                //改变文字路径x轴的偏移量
                scrollSize = (int) animation.getAnimatedValue();
                postInvalidate();
            }
        });
        animator_text_scroll.start();
    }
} else {
    //这里是正常情况,isShowLongText,是我在启动控件动画的时候,是否启动 文字有渐变效果的标识,
    //如果是长文字,启动渐变效果的话,如果控件变小,文字内容在当前控件外,会显得很难看,所以根据这个标识,关闭,这里你可以先忽略(同时因为根据路径绘制text不能有间距效果,这个标识还是判断是否在控件2遍绘制遮挡物,这是作者的解决方式,如果你有更好的方式可以在下方留言)
    isShowLongText = false;
    /**
     * 简单的绘制文字,没有考虑文字长度超过控件长度
     * */
    //这里是居中显示
    textPaint.setTextAlign(Paint.Align.CENTER);
    //参数1:文字
    //参数2,3:绘制文字的中心点
    //参数4:画笔
    canvas.drawText(buttonString, textRect.centerX(), baseline, textPaint);
}
4、【自定义控件属性】
<?xml version="1.0" encoding="utf-8"?>
<resources>
    <declare-styleable name="SmartLoadingView">
        <attr name="textStr" format="string" />
        <attr name="errorStr" format="string" />
        <attr name="cannotclickBg" format="color" />
        <attr name="errorBg" format="color" />
        <attr name="normalBg" format="color" />
        <attr name="cornerRaius" format="dimension" />
        <attr name="textColor" format="color" />
        <attr name="textSize" format="dimension" />
        <attr name="scrollSpeed" format="integer" />
    </declare-styleable>
</resources>

这里以,文案为例, textStr。比如你再布局种用到app:txtStr="文案内容"。在自定义控件里获取如下:

public SmartLoadingView(Context context, AttributeSet attrs, int defStyleAttr) {
    super(context, attrs, defStyleAttr);
    //自定义控件的3参方法的attrs就是我们设置自定义属性的关键
    //比如我们再attrs.xml里自定义了我们的属性,
    TypedArray typedArray = getContext().obtainStyledAttributes(attrs, R.styleable.SmartLoadingView);
    //这里是获取用户有没有设置整个属性
    //这里是从用户那里获取有没有设置文案
    String title = typedArray.getString(R.styleable.SmartLoadingView_textStr);
    if (TextUtils.isEmpty(title)){
       //如果获取来的属性是空,那么可以默认一个属性
       //(作者忘记设置了!因为已经发布后期优化,老尴尬了)
       buttonString ="默认文案";
    }else{
       //如果有设置文案
       buttonString = title;
    }

}
5、【设置点击事件,启动动画】

为了点击事件的直观,也可以把处理防止重复点击事件封装在里面

//这是我自定义登录点击的接口
public interface LoginClickListener {
    void click();
}

public void setLoginClickListener(final LoginClickListener loginClickListener) {
    this.setOnClickListener(new OnClickListener() {
        @Override
        public void onClick(View v) {
            if (loginClickListener != null) {
                //防止重复点击
                if (!isAnimRuning) {
                    start();
                    loginClickListener.click();
                }

            }
        }
    });
}
6、【动画讲解】
6.1、第一个动画,矩形到正方形,以及矩形到圆角矩形(这里是2个动画,只是同时进行)

矩形到正方形(为了简化,我把源码一些其他属性去掉了,这样方便理解)

//其中  default_all_distance = (w - h) / 2;除以2是因为2遍都往中间缩短
private void set_rect_to_circle_animation() {
    //这是一个属性动画,current_left 会在duration时间内,从0到default_all_distance匀速变化
    //想添加多样化的话  还可以加入插值器。
    animator_rect_to_square = ValueAnimator.ofInt(0, default_all_distance);
    animator_rect_to_square.setDuration(duration);
    animator_rect_to_square.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
        @Override
        public void onAnimationUpdate(ValueAnimator animation) {
            //这里的current_left跟onDraw相关,还记得吗
            //onDraw里的控件区域 
            //控件左边区域 rectf.left = current_left;
            //控件右边区域 rectf.right = width - current_left;
            current_left = (int) animation.getAnimatedValue();
            //刷新绘制
            invalidate();
        }
    });

矩形到圆角矩形。就是从一个没有圆角的变成完全圆角的矩形,当然我展示的时候只有第三个图,最后一个按钮才明显了。

其他的我直接设置成了圆角按钮,因为我把圆角做成了一个属性。

还记得onDraw里的canvas.drawRoundRect(rectf, circleAngle, circleAngle, paint);circleAngle就是圆角的半径

可以想象一下如果全是圆角,那么circleAngle会是多少,当然是height/2;没错吧,所以

因为我把圆角做成了属性obtainCircleAngle是从xml文件获取的属性,如果不设置,则为0,就没有任何圆角效果

animator_rect_to_angle = ValueAnimator.ofInt(obtainCircleAngle, height / 2);
animator_rect_to_angle.setDuration(duration);
animator_rect_to_angle.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
    @Override
    public void onAnimationUpdate(ValueAnimator animation) {
        //这里试想下如果是一个正方形,刚好是圆形的圆角,那就是一个圆
        circleAngle = (int) animation.getAnimatedValue();
        //刷新绘画
        invalidate();
    }
});

2个属性动画做好后,用

private AnimatorSet animatorSet = new AnimatorSet();把属性动画加进去,可以设置2个动画同时进行,还是先后顺序

这里是同时进行所用用with

animatorSet
        .play(animator_rect_to_square).with(animator_rect_to_angle);
6.2、变成圆形后,有一个loading加载动画

这里就是画圆弧,只是不断改变,圆弧的起始点和终点,最终呈现loading状态,也是在onDraw里

//绘制加载进度
if (isLoading) {
    //参数1:绘制圆弧区域
    //参数2,3:绘制圆弧起始点和终点
    canvas.drawArc(new RectF(width / 2 - height / 2 + height / 4, height / 4, width / 2 + height / 2 - height / 4, height / 2 + height / 2 - height / 4), startAngle, progAngle, false, okPaint);

    //这里是我通过实践,实现最佳loading动画
    //当然这里有很多方式,因为我自定义这个view想把所有东西都放在这个类里面,你也可以有你的方式
    //如果有更好的方式,欢迎留言,告知我一下
    startAngle += 6;
    if (progAngle >= 270) {
        progAngle -= 2;
        isAdd = false;
    } else if (progAngle <= 45) {
        progAngle += 6;
        isAdd = true;
    } else {
        if (isAdd) {
            progAngle += 6;
        } else {
            progAngle -= 2;
        }
    }
    //刷新绘制,这里不用担心有那么多刷新绘制,会不会影响性能
    //
    postInvalidate();
}
6.3、loading状态,到打勾动画

那么这里首先要把loading动画取消,那么直接改变isLoading=false;不会只它同时启动打勾动画;打勾动画的动画,这里比较麻烦,也是我在别人自定义动画里学习的,通过PathMeasure,实现路径动画

/**
 * 路径--用来获取对勾的路径
 */
private Path path = new Path();
/**
 * 取路径的长度
 */
private PathMeasure pathMeasure;
//初始化打勾动画路径;
private void initOk() {
    //对勾的路径
    path.moveTo(default_all_distance + height / 8 * 3, height / 2);
    path.lineTo(default_all_distance + height / 2, height / 5 * 3);
    path.lineTo(default_all_distance + height / 3 * 2, height / 5 * 2);
    pathMeasure = new PathMeasure(path, true);
}
//初始化打勾动画
private void set_draw_ok_animation() {
    animator_draw_ok = ValueAnimator.ofFloat(1, 0);
    animator_draw_ok.setDuration(duration);
    animator_draw_ok.addUpdateListener(new ValueAnimator.AnimatorUpdateListener() {
        @Override
        public void onAnimationUpdate(ValueAnimator animation) {
            startDrawOk = true;
            isLoading = false;
            float value = (Float) animation.getAnimatedValue();
            effect = new DashPathEffect(new float[]{pathMeasure.getLength(), pathMeasure.getLength()}, value * pathMeasure.getLength());
            okPaint.setPathEffect(effect);
            invalidate();

        }
    });
}

//启动打勾动画只需要调用
animator_draw_ok.start();

onDraw里绘制打勾动画

//绘制打勾,这是onDraw的,startDrawOk是判断是否开启打勾动画的标识
if (startDrawOk) {
    canvas.drawPath(path, okPaint);
}
6.4、loading状态下回到失败样子(有点类似联网失败了)

之前6.1提到了矩形到圆角矩形和矩形到正方形的动画,那么这里只是前面2个动画反过来,再加上联网失败的文案,和联网失败的背景图即刻

6.5、loading状态下启动扩散全屏动画(重点)

这里我通过loginSuccess里参数的类型启动不同效果:

1、启动扩散全屏动画

public void loginSuccess(Animator.AnimatorListener endListener) {}

2、启动打勾动画

public void loginSuccess(AnimationOKListener animationOKListener) {}

启动扩散全屏是本文的重点,里面还涉及到了一个自定义view

CirclBigView,这个控件是全屏的,而且是从一个小圆不断改变半径变成大圆的动画,那么有人会问,全屏肯定不好啊,会影响布局,但是这里,我把它放在了activity的视图层:

ViewGroup activityDecorView = (ViewGroup) ((Activity) getContext()).getWindow().getDecorView();
ViewGroup.LayoutParams layoutParams = new ViewGroup.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT, ViewGroup.LayoutParams.MATCH_PARENT);
activityDecorView.addView(circlBigView, layoutParams);

这个灵感也是前不久在学习微信,拖拽退出的思路里发现的。全部代码如下:

public void toBigCircle(Animator.AnimatorListener endListener) {
    //把缩小到圆的半径,告诉circlBigView
    circlBigView.setRadius(this.getMeasuredHeight() / 2);
    //把当前背景颜色告诉circlBigView
    circlBigView.setColorBg(normal_color);
    int[] location = new int[2];
    //测量当前控件所在的屏幕坐标x,y
    this.getLocationOnScreen(location);
    //把当前坐标告诉circlBigView,同时circlBigView会计算当前点,到屏幕4个点的最大距离,即是当前控件要扩散到的半径
    //具体建议读者看完本博客后,去下载玩耍下。
    circlBigView.setXY(location[0] + this.getMeasuredWidth() / 2, location[1]);
    if (circlBigView.getParent() == null) {
        ViewGroup activityDecorView = (ViewGroup) ((Activity) getContext()).getWindow().getDecorView();
        ViewGroup.LayoutParams layoutParams = new ViewGroup.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT, ViewGroup.LayoutParams.MATCH_PARENT);
        activityDecorView.addView(circlBigView, layoutParams);
    }
    circlBigView.startShowAni(endListener);
    isAnimRuning = false;
}

结束语:因为项目是把之前的功能写成了控件,所以有很多地方不完善。希望有建议的大牛和小伙伴,提示提示我,让我完善的更好。谢谢

原创声明:本文系作者授权腾讯云开发者社区发表,未经许可,不得转载。

如有侵权,请联系 cloudcommunity@tencent.com 删除。

原创声明:本文系作者授权腾讯云开发者社区发表,未经许可,不得转载。

如有侵权,请联系 cloudcommunity@tencent.com 删除。

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
目录
  • 先上效果图(如果感兴趣请看后面讲解):
    • 1、登录效果展示
      • 2、关注效果展示
      • 1、【画圆角矩形】
      • 2、【确定控件的大小】
      • 3、【绘制文字text】
      • 4、【自定义控件属性】
      • 5、【设置点击事件,启动动画】
      • 6、【动画讲解】
        • 6.1、第一个动画,矩形到正方形,以及矩形到圆角矩形(这里是2个动画,只是同时进行)
          • 6.2、变成圆形后,有一个loading加载动画
            • 6.3、loading状态,到打勾动画
              • 6.4、loading状态下回到失败样子(有点类似联网失败了)
                • 6.5、loading状态下启动扩散全屏动画(重点)
                领券
                问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档