H3C学习 | 配置命令 | IRF简单配置实验 HCL模拟实验IRF

[S1]irf member 1 priority 5  成员编号1  优先级5   然后保存 reboot重启生效
[S1]irf-port 1/1   创建IRF端口1
[S1]interface Ten-GigabitEthernet 1/0/50        进入49、50端口关闭端口
[S1-Ten-GigabitEthernet1/0/50]shutdown              
[S1]interface Ten-GigabitEthernet1/0/49             
[S1-Ten-GigabitEthernet1/0/49]shutdown                
[S1-irf-port1/1]port  group interface Ten-GigabitEthernet 1/0/49   IRF端口1绑定物理端口49
[S1-irf-port1/1]port  group interface Ten-GigabitEthernet 1/0/50   IRF端口1绑定物理端口50
[S1]interface Ten-GigabitEthernet 1/0/49        开启物理端口49、50
[S1-Ten-GigabitEthernet1/0/49]undo  shutdown
[S1]interface Ten-GigabitEthernet 1/0/50
[S1-Ten-GigabitEthernet1/0/50]un shutdown
[S1]irf-port-configuration active   开启IRF

[S2]irf member 1 renumber 2   成员编号1修改成2  然后保存 reboot重启生效
[S2]irf member 2 priority 4   成员2优先级4
[S2]irf-port 2/2   创建IRF端口2 
[S2]interface Ten-GigabitEthernet 2/0/49   进入49、50端口  关闭端口 
[S2-Ten-GigabitEthernet2/0/49]shutdown
[S2]interface Ten-GigabitEthernet 2/0/50
[S2-Ten-GigabitEthernet2/0/50]shutdown
[S2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/49    IRF端口2绑定物理端口49
[S2-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/50
[S2]interface Ten-GigabitEthernet2/0/49         开启物理端口49、50
[S2-Ten-GigabitEthernet2/0/49]un shutdown
[S2]interface Ten-GigabitEthernet2/0/50
[S2-Ten-GigabitEthernet2/0/50]un shutdown
[S2]save f        保存一下
[S2]irf-port-configuration active              开启IRF