QPNP 8909 8916 充电相关（2）【转】

static int qpnp_vm_bms_probe(struct spmi_device *spmi)
{
    ...........
    ..........
    ...........
    ..........
 
    //这里把电池的配置文件dtsi的读出来，并存到当前的结构体。
    rc = set_battery_data(chip);
    rc = config_battery_data(chip->batt_data);
    ..........
    ..........
    //这个是核心的工作，一个线程，BMS的主要内容在此
    INIT_DELAYED_WORK(&chip->monitor_soc_work, monitor_soc_work);
    ..........
    ..........
 
    //电池一些常规的检测，主要从PMIC上读到的相关信息
    battery_insertion_check(chip);
    battery_status_check(chip);
 
    /* character device to pass data to the userspace */
    rc = register_bms_char_device(chip);
    if (rc) {
        pr_err("Unable to regiter '/dev/vm_bms' rc=%d\n", rc);
        goto fail_bms_device;
    }
 
    the_chip = chip;
    //这个也很重要，我们从上节知道，初值last_ocv_soc是非常重要的，决定着后面的soc估值算法
    calculate_initial_soc(chip);
 
    //设置和注册电池的power supply
    /* setup & register the battery power supply */
    chip->bms_psy.name = "bms";
    chip->bms_psy.type = POWER_SUPPLY_TYPE_BMS;
    chip->bms_psy.properties = bms_power_props;
    chip->bms_psy.num_properties = ARRAY_SIZE(bms_power_props);
    chip->bms_psy.get_property = qpnp_vm_bms_power_get_property;
    chip->bms_psy.set_property = qpnp_vm_bms_power_set_property;
    chip->bms_psy.external_power_changed = qpnp_vm_bms_ext_power_changed;
    chip->bms_psy.property_is_writeable = qpnp_vm_bms_property_is_writeable;
    chip->bms_psy.supplied_to = qpnp_vm_bms_supplicants;
    chip->bms_psy.num_supplicants = ARRAY_SIZE(qpnp_vm_bms_supplicants);
 
    rc = power_supply_register(chip->dev, &chip->bms_psy);
    if (rc < 0) {
        pr_err("power_supply_register bms failed rc = %d\n", rc);
        goto fail_psy;
    }
    .....................
    ....................
    ....................
    //这里启动工作线程
    schedule_delayed_work(&chip->monitor_soc_work, 0);
    ..........................
    .......................
 
}

static int calculate_initial_soc(struct qpnp_bms_chip *chip)
{
    ........
    ........
    //读当前电池温度
    rc = get_batt_therm(chip, &batt_temp);
    ............
    //读PON OCV
    rc = read_and_update_ocv(chip, batt_temp, true);
    ..........
    //读关机保存的soc和last_soc_uv
    
    rc = read_shutdown_ocv_soc(chip);
 
    //这里判断是使用估计soc还是估值soc。如果chip->warm_reset 为真
    if (chip->warm_reset) {
        if (chip->shutdown_soc_invalid) { //这个是dtsi的一个配置选项，若没有配置，
                        //则不使用关机soc
            est_ocv = estimate_ocv(chip); //估值soc
            chip->last_ocv_uv = est_ocv;
        } else {
            chip->last_ocv_uv = chip->shutdown_ocv;//使用关机的soc和ocv
            pr_err("Hyan %d : set chip->last_ocv_uv = %d\n", __LINE__, chip->last_ocv_uv);
            chip->last_soc = chip->shutdown_soc;
            chip->calculated_soc = lookup_soc_ocv(chip,
                        chip->shutdown_ocv, batt_temp);
        }
    } else {
 
        if (chip->workaround_flag & WRKARND_PON_OCV_COMP)
            adjust_pon_ocv(chip, batt_temp);
 
         /* !warm_reset use PON OCV only if shutdown SOC is invalid */
        chip->calculated_soc = lookup_soc_ocv(chip,
                    chip->last_ocv_uv, batt_temp);
        if (!chip->shutdown_soc_invalid &&
            (abs(chip->shutdown_soc - chip->calculated_soc) <
                chip->dt.cfg_shutdown_soc_valid_limit)) {
            chip->last_ocv_uv = chip->shutdown_ocv; 
            chip->last_soc = chip->shutdown_soc;
            chip->calculated_soc = lookup_soc_ocv(chip,
                        chip->shutdown_ocv, batt_temp);//使用估值soc
            
        } else {
            chip->shutdown_soc_invalid = true; //使用关机soc
            
        }
    }
    .............
    ............
}
 
    //得到PON OCV
    rc = read_and_update_ocv(chip, batt_temp, true);
        ocv_uv = convert_vbatt_raw_to_uv(chip, ocv_data, is_pon_ocv);
                uv = vadc_reading_to_uv(reading, true); //读ADC值
                uv = adjust_vbatt_reading(chip, uv);   //转化为soc_uv
                rc = qpnp_vbat_sns_comp_result(chip->vadc_dev, &uv, is_pon_ocv); //根据IC的类型，进行温度补偿
    //从寄存器中读到储存的soc和ocv
    read_shutdown_ocv_soc
        rc = qpnp_read_wrapper(chip, (u8 *)&stored_ocv,
                chip->base + BMS_OCV_REG, 2);
        rc = qpnp_read_wrapper(chip, &stored_soc, chip->base + BMS_SOC_REG, 1);
 
    adjust_pon_ocv(struct qpnp_bms_chip *chip, int batt_temp)
        rc = qpnp_vadc_read(chip->vadc_dev, DIE_TEMP, &result); 
        pc = interpolate_pc(chip->batt_data->pc_temp_ocv_lut,
                    batt_temp, chip->last_ocv_uv / 1000); //根据ocv和temp，查表得PC(soc)。
        rbatt_mohm = get_rbatt(chip, pc, batt_temp); //根据soc和temp，得电池内阻zhi
        /* convert die_temp to DECIDEGC */
        die_temp = (int)result.physical / 100;     
        current_ma = interpolate_current_comp(die_temp);  //当前电流
        delta_uv = rbatt_mohm * current_ma;
        chip->last_ocv_uv += delta_uv;   //修正last_ocv_uv
 
    //这个函数主要根据last_ocv_uv，计算出soc的
    lookup_soc_ocv(struct qpnp_bms_chip *chip, int ocv_uv, int batt_temp)
            //查表得到soc_ocv，soc_cutoff
            soc_ocv = interpolate_pc(chip->batt_data->pc_temp_ocv_lut,
                    batt_temp, ocv_uv / 1000);
            soc_cutoff = interpolate_pc(chip->batt_data->pc_temp_ocv_lut,
                batt_temp, chip->dt.cfg_v_cutoff_uv / 1000);
 
            soc_final = DIV_ROUND_CLOSEST(100 * (soc_ocv - soc_cutoff),
                            (100 - soc_cutoff));
 
            if (batt_temp > chip->dt.cfg_low_temp_threshold)
                iavg_ma = calculate_uuc_iavg(chip);
            else
                iavg_ma = chip->current_now / 1000;
            //查表得到FCC，ACC
            fcc = interpolate_fcc(chip->batt_data->fcc_temp_lut,
                                batt_temp);
            acc = interpolate_acc(chip->batt_data->ibat_acc_lut,
                            batt_temp, iavg_ma);
            //计算出UUC
            soc_uuc = ((fcc - acc) * 100) / fcc;
 
            if (batt_temp > chip->dt.cfg_low_temp_threshold)
                soc_uuc = adjust_uuc(chip, soc_uuc);
            //得到soc_acc
            soc_acc = DIV_ROUND_CLOSEST(100 * (soc_ocv - soc_uuc),
                            (100 - soc_uuc));
 
            soc_final = soc_acc;   //这个为上报的soc
            chip->last_acc = acc;

static void monitor_soc_work(struct work_struct *work)
    calculate_delta_time(&chip->tm_sec, &chip->delta_time_s);
    rc = get_batt_therm(chip, &batt_temp);
    new_soc = lookup_soc_ocv(chip, chip->last_ocv_uv,batt_temp);
    new_soc = clamp_soc_based_on_voltage(chip, new_soc);
    report_vm_bms_soc(chip);//上报事件，上层得到消息，调用qpnp_vm_bms_power_get_property，获取相关的属性，计算出
                last_ocv_uv,并通过qpnp_vm_bms_power_set_property方法，设置last_ocv_uv，并启动monitor_soc_work。