【STM32F407的DSP教程】第7章 ARM DSP源码和库移植方法（IAR8）

void arm_abs_f32(
  const float32_t * pSrc,
        float32_t * pDst,
        uint32_t blockSize)
{
        uint32_t blkCnt;                               /* Loop counter */

#if defined(ARM_MATH_NEON)
    float32x4_t vec1;
    float32x4_t res;

    /* Compute 4 outputs at a time */
    blkCnt = blockSize >> 2U;

    while (blkCnt > 0U)
    {
        /* C = |A| */

            /* Calculate absolute values and then store the results in the destination buffer. */
        vec1 = vld1q_f32(pSrc);
        res = vabsq_f32(vec1);
        vst1q_f32(pDst, res);

        /* Increment pointers */
        pSrc += 4;
        pDst += 4;
        
        /* Decrement the loop counter */
        blkCnt--;
    }

    /* Tail */
    blkCnt = blockSize & 0x3;

#else
#if defined (ARM_MATH_LOOPUNROLL)

  /* Loop unrolling: Compute 4 outputs at a time */
  blkCnt = blockSize >> 2U;

  while (blkCnt > 0U)
  {
    /* C = |A| */

    /* Calculate absolute and store result in destination buffer. */
    *pDst++ = fabsf(*pSrc++);

    *pDst++ = fabsf(*pSrc++);

    *pDst++ = fabsf(*pSrc++);

    *pDst++ = fabsf(*pSrc++);

    /* Decrement loop counter */
    blkCnt--;
  }

  /* Loop unrolling: Compute remaining outputs */
  blkCnt = blockSize % 0x4U;

#else

  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

#endif /* #if defined (ARM_MATH_LOOPUNROLL) */
#endif /* #if defined(ARM_MATH_NEON) */

  while (blkCnt > 0U)
  {
    /* C = |A| */

    /* Calculate absolute and store result in destination buffer. */
    *pDst++ = fabsf(*pSrc++);

    /* Decrement loop counter */
    blkCnt--;
  }

}

#include "arm_abs_f32.c"
#include "arm_abs_q15.c"
#include "arm_abs_q31.c"
#include "arm_abs_q7.c"
#include "arm_add_f32.c"
#include "arm_add_q15.c"
#include "arm_add_q31.c"
#include "arm_add_q7.c"
#include "arm_dot_prod_f32.c"
#include "arm_dot_prod_q15.c"
#include "arm_dot_prod_q31.c"
#include "arm_dot_prod_q7.c"
#include "arm_mult_f32.c"
#include "arm_mult_q15.c"
#include "arm_mult_q31.c"
#include "arm_mult_q7.c"
#include "arm_negate_f32.c"
#include "arm_negate_q15.c"
#include "arm_negate_q31.c"
#include "arm_negate_q7.c"
#include "arm_offset_f32.c"
#include "arm_offset_q15.c"
#include "arm_offset_q31.c"
#include "arm_offset_q7.c"
#include "arm_scale_f32.c"
#include "arm_scale_q15.c"
#include "arm_scale_q31.c"
#include "arm_scale_q7.c"
#include "arm_shift_q15.c"
#include "arm_shift_q31.c"
#include "arm_shift_q7.c"
#include "arm_sub_f32.c"
#include "arm_sub_q15.c"
#include "arm_sub_q31.c"
#include "arm_sub_q7.c"

#include "bsp.h"            /* 底层硬件驱动 */
#include "arm_math.h"



/* 定义例程名和例程发布日期 */
#define EXAMPLE_NAME    "V7-ARM的DSP移植模板（源码方式）"
#define EXAMPLE_DATE    "2019-07-31"
#define DEMO_VER        "1.0"

static void PrintfLogo(void);
static void PrintfHelp(void);

/*
*********************************************************************************************************
*    函 数 名: main
*    功能说明: c程序入口
*    形    参: 无
*    返 回 值: 错误代码(无需处理)
*********************************************************************************************************
*/
int main(void)
{
    uint8_t ucKeyCode;        /* 按键代码 */
    float32_t pSrc;
    float32_t pDst;
    q31_t pSrc1;
    q31_t pDst1;
    q15_t pSrc2;
    q15_t pDst2;

    
    bsp_Init();        /* 硬件初始化 */
    
    PrintfLogo();    /* 打印例程名称和版本等信息 */
    PrintfHelp();    /* 打印操作提示 */

    bsp_StartAutoTimer(0, 100);    /* 启动1个100ms的自动重装的定时器 */
    
    /* 主程序大循环 */
    while (1)
    {
        /* CPU空闲时执行的函数，在 bsp.c */
        bsp_Idle();        
        
        /* 判断定时器超时时间 */
        if (bsp_CheckTimer(0))    
        {
            /* 每隔100ms 进来一次 */
            /* 翻转LED2的状态 */
            bsp_LedToggle(2);    
        }

        /* 处理按键事件 */
        ucKeyCode = bsp_GetKey();
        if (ucKeyCode > 0)
        {
            /* 有键按下 */
            switch (ucKeyCode)
            {
                case KEY_DOWN_K1:               /* K1键按下 */
                    pSrc -= 1.23f;
                    arm_abs_f32(&pSrc, &pDst, 1);
                    printf("pDst = %f\r\n", pDst);
                    break;
                    
                case KEY_DOWN_K2:              /* K2键按下 */
                    pSrc1 -= 1;
                    arm_abs_q31(&pSrc1, &pDst1, 1);
                    printf("pDst1 = %d\r\n", pDst1);
                    break;

                case KEY_DOWN_K3:              /* K3键按下 */
                    pSrc2 -= 1;
                    arm_abs_q15(&pSrc2, &pDst2, 1);
                    printf("pDst2 = %d\r\n", pDst2);
                    break;
                
                default:
                    break;
            }
        }
    }
}