ceph-块存储客户端

yuezhimi

发布于 2020-09-30 11:19:29

3K0

发布于 2020-09-30 11:19:29

文章被收录于专栏：yuezhimiyuezhimi

ceph块存储

ceph块设备，以前称为RADOS块设备，为客户机提供可靠性、分布式和高性能的块存储磁盘。RADOS块设备利用librbd库并以顺序的形式在ceph集群的多个osd上存储数据块。RBD是由ceph的RADOS层支持，因此每个块设备都分布在多个ceph节点上，提供了性能和优异的可靠性。RBD有linux内核的本地支持，这意味着RBD驱动程序从过去几年就与linux内核集成的很好。除了可靠性和性能外，RBD还提供了企业特性，例如完整和增量快照、瘦配置、写时复制克隆、动态调整大小等，RBD还支持内存缓存，这大大提高了性能。

安装ceph块存储客户端

创建ceph块客户端用户名和认证密钥

[ceph-admin@ceph-node1 my-cluster]$ ceph auth get-or-create client.rbd mon 'allow r' osd 'allow class-read object_prefix rbd_children, allow rwx pool=rbd' | tee ./ceph.client.rbd.keyring
[client.rbd]
    key = AQChG2Vcu552KRAAMf4/SdfSVa4sFDZPfsY8bg==
    
[ceph-admin@ceph-node1 my-cluster]$ ceph auth get client.rbd
exported keyring for client.rbd
[client.rbd]
    key = AQChG2Vcu552KRAAMf4/SdfSVa4sFDZPfsY8bg==
    caps mon = "allow r"
    caps osd = "allow class-read object_prefix rbd_children, allow rwx pool=rbd"

将密钥文件和配置文件拷贝到客户端

[ceph-admin@ceph-node1 my-cluster]$ scp ceph.client.rbd.keyring /etc/ceph/ceph.conf root@192.168.0.123:/etc/ceph

检查客户端是否符合块设备环境要求

[root@localhost ~]# uname -r
3.10.0-862.el7.x86_64
[root@localhost ~]# modprobe rbd
[root@localhost ~]# echo $?
0

安装ceph客户端

[root@localhost ~]# wget -O /etc/yum.repos.d/ceph.repo https://raw.githubusercontent.com/aishangwei/ceph-demo/master/ceph-deploy/ceph.repo
[root@localhost ~]# yum install -y ceph

测试密钥连接集群

[root@localhost ~]# ceph -s --name client.rbd
  cluster:
    id:     cde2c9f7-009e-4bb4-a206-95afa4c43495
    health: HEALTH_OK
 
  services:
    mon: 3 daemons, quorum ceph-node1,ceph-node2,ceph-node3
    mgr: ceph-node1(active), standbys: ceph-node2, ceph-node3
    osd: 9 osds: 9 up, 9 in
 
  data:
    pools:   0 pools, 0 pgs
    objects: 0 objects, 0B
    usage:   9.06GiB used, 171GiB / 180GiB avail
    pgs:

客户端创建块设备及映射

创建rbd池

[ceph-admin@ceph-node1 my-cluster]$ ceph osd lspools
[ceph-admin@ceph-node1 my-cluster]$ ceph osd pool create rbd 128
pool 'rbd' created
[ceph-admin@ceph-node1 my-cluster]$ ceph osd lspools
1 rbd,

客户端创建块设备

[root@localhost ceph]# rbd create rbd1 --size 10240 --name client.rbd

查看

[root@localhost ceph]# rbd ls -p rbd --name client.rbd
rbd1
[root@localhost ceph]# rbd list --name client.rbd
rbd1
[root@localhost ceph]# rbd --image rbd1 info --name client.rbd
rbd image 'rbd1':
    size 10GiB in 2560 objects
    order 22 (4MiB objects)
    block_name_prefix: rbd_data.faa76b8b4567
    format: 2
    features: layering, exclusive-lock, object-map, fast-diff, deep-flatten
    flags: 
    create_timestamp: Thu Feb 14 17:53:54 2019

映射到客户端

[root@localhost ceph]# rbd map --image rbd1 --name client.rbd
rbd: sysfs write failed
RBD image feature set mismatch. You can disable features unsupported by the kernel with "rbd feature disable rbd1 object-map fast-diff deep-flatten".
In some cases useful info is found in syslog - try "dmesg | tail".
rbd: map failed: (6) No such device or address

映射报错

layering：分层支持 exclusive-lock：排它锁定支持对 object-map：对象映射支持，需要排它所（exclusive-lock）。 deep-flatten：快照平支持（snapshot flatten support） fast-diff：在client-node1上使用krbd（内核rbd）客户机进行快速diff计算（需要对象映射），我们将无法在centos内核3.10上映射块设备映像，因为该内核不支持对象映射（object-map）、深平（deep-flatten）和快速diff（fast-diff）（在内核4.9中引入了支持）。为了解决这个问题，我们将禁用不支持的特性，有几个选项可以做到这一点：

1）动态禁用

[root@localhost ceph]# rbd feature disable rbd1 exclusive-lock object-map fast-diff deep-flatten --name client.rbd

2）创建rbd镜像时之启用分层特性

[root@localhost ceph]# rbd create rbd2 --size 10240 --image-feature layering --name client.rbd

3）ceph配置文件中禁用

rbd default features = 1

再次映射到客户端

[root@localhost ceph]# rbd map --image rbd1 --name client.rbd
/dev/rbd0
[root@localhost ceph]# rbd showmapped --name client.rbd
id pool image snap device    
0  rbd  rbd1  -    /dev/rbd0

创建文件系统，并挂载

[root@localhost ceph]# fdisk -l /dev/rbd0

Disk /dev/rbd0: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 4194304 bytes / 4194304 bytes

[root@localhost ceph]# mkfs.xfs /dev/rbd0
meta-data=/dev/rbd0              isize=512    agcount=16, agsize=163840 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=0, sparse=0
data     =                       bsize=4096   blocks=2621440, imaxpct=25
         =                       sunit=1024   swidth=1024 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal log           bsize=4096   blocks=2560, version=2
         =                       sectsz=512   sunit=8 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
[root@localhost ceph]# mkdir /mnt/ceph-disk1
[root@localhost ceph]# mount /dev/rbd0 /mnt/ceph-disk1
[root@localhost ceph]# df -h /mnt/ceph-disk1
Filesystem      Size  Used Avail Use% Mounted on
/dev/rbd0        10G   33M   10G   1% /mnt/ceph-disk1

写入数据测试

[root@localhost ceph]# ll /mnt/ceph-disk1/
total 0
[root@localhost ceph]# dd if=/dev/zero of=/mnt/ceph-disk1/file1 count=100 bs=1M
100+0 records in
100+0 records out
104857600 bytes (105 MB) copied, 0.127818 s, 820 MB/s
[root@localhost ceph]# ll /mnt/ceph-disk1/
total 102400
-rw-r--r-- 1 root root 104857600 Feb 15 10:47 file1
[root@localhost ceph]# df -h /mnt/ceph-disk1/
Filesystem      Size  Used Avail Use% Mounted on
/dev/rbd0        10G  133M  9.9G   2% /mnt/ceph-disk1

开机自动挂载

下载脚本

[root@localhost ceph]# wget -O /usr/local/bin/rbd-mount https://raw.githubusercontent.com/aishangwei/ceph-demo/master/client/rbd-mount
[root@localhost ceph]# chmod +x /usr/local/bin/rbd-mount
[root@localhost ceph]# cat /usr/local/bin/rbd-mount
#!/bin/bash

# Pool name where block device image is stored
export poolname=rbd
 
# Disk image name
export rbdimage=rbd1
 
# Mounted Directory
export mountpoint=/mnt/ceph-disk1
 
# Image mount/unmount and pool are passed from the systemd service as arguments
# Are we are mounting or unmounting
if [ "$1" == "m" ]; then
   modprobe rbd
   rbd feature disable $rbdimage object-map fast-diff deep-flatten
   rbd map $rbdimage --id rbd --keyring /etc/ceph/ceph.client.rbd.keyring
   mkdir -p $mountpoint
   mount /dev/rbd/$poolname/$rbdimage $mountpoint
fi
if [ "$1" == "u" ]; then
   umount $mountpoint
   rbd unmap /dev/rbd/$poolname/$rbdimage
fi

做成系统服务

[root@localhost ceph]# wget -O /etc/systemd/system/rbd-mount.service https://raw.githubusercontent.com/aishangwei/ceph-demo/master/client/rbd-mount.service
[root@localhost ceph]# systemctl daemon-reload
[root@localhost ceph]# systemctl enable rbd-mount.service

重启查看自动挂载

[root@localhost ceph]# reboot -f
[root@localhost ceph]# df -h /mnt/ceph-disk1/
Filesystem      Size  Used Avail Use% Mounted on
/dev/rbd1        10G  133M  9.9G   2% /mnt/ceph-disk1
[root@localhost ceph]# ll -h /mnt/ceph-disk1/
total 100M
-rw-r--r-- 1 root root 100M Feb 15 10:47 file1

本文参与腾讯云自媒体分享计划，分享自作者个人站点/博客。

原始发表：2019-02-15 ，如有侵权请联系 cloudcommunity@tencent.com 删除

分布式