前往小程序,Get更优阅读体验!
立即前往
首页
学习
活动
专区
工具
TVP
发布
社区首页 >专栏 >图论--2-SAT--Ligthoj 1407 Explosion 三元关系枚举

图论--2-SAT--Ligthoj 1407 Explosion 三元关系枚举

作者头像
风骨散人Chiam
发布2020-10-28 11:49:09
3160
发布2020-10-28 11:49:09
举报
文章被收录于专栏:CSDN旧文

Planet Krypton is about to explode. The inhabitants of this planet have to leave the planet immediately. But the problem is that, still some decisions have to be made - where to go, how to go etc. So, the council of Krypton has invited some of the people to meet in a large hall.

There are n people in planet Krypton, for simplicity they are given ids from 1 to n. The council uses a super computer named Oracle to call them in the meeting. Oracle has four types of messages for invitation. The message format is type x y, where x and y are two different person's ids and type is an integer as follows:

1.      1 x y means that either x or y should be present in the meeting.

2.      2 x y means that if x is present, then no condition on y, but if x is absent y should be absent

3.      3 x y means that either x or y must be absent.

4.      4 x y means that either x or y must be present but not both.

Each member of the council has an opinion too. The message format is type x y z, where x, y and z are three different person's ids and type is an integer as follows:

1.      1 x y z means that at least one of x, y or z should be present

2.      2 x y z means that at least one of x, y or z should be absent

Now you have to find whether the members can be invited such that every message by oracle and the council members are satisfied.

Input Input starts with an integer T (≤ 200), denoting the number of test cases.

Each case starts with a blank line. Next line contains three integers n, m and k (3 ≤ n ≤ 1000, 0 ≤ m ≤ 2000, 0 ≤ k ≤ 5) where m means the number of messages by oracle, k means the total members in the council. Each of the next m lines will contain a message of Oracle in the format given above. Each of the next k lines will contain a message of a council member. You can assume that all the ids given are correct.

Output For each case, print the case number and whether it's possible to invite the people such that all the messages are satisfied. If it's not possible, then print'Impossible.' in a single line. Otherwise, print 'Possible' and the number of invited people and the ids of the invited people in ascending order. Print the line leaving a single space between fields. Terminate this line with a '.'. See the samples for more details. There can be multiple answers; print any valid one.

Sample Input Output for Sample Input 3

3 2 1

3 2 1

1 2 3

1 1 2 3

4 4 1

2 2 1

4 1 2

4 1 3

4 1 4

2 2 3 4

4 5 0

3 1 2

2 2 3

2 2 4

2 1 2

2 2 1

Case 1: Possible 2 1 3.

Case 2: Impossible.

Case 3: Possible 0.

Note This is a special judge problem; wrong output format may cause 'Wrong Answer'.

题目大意:

有一个机器产生m个限制,限制有4种: 

1.  x or y 至少有1个人参加

2. x不参加 则 y必须不参加,(隐含 y参加 x必须参加)

3. x or y 至少有1个人不参加

4. x & y 同时参加 或者不参加

有 k 个人 进行投票,有2种类别

1. x y z 至少有一个人参加

2. x y z 至少有一个人不参加

有n 个人参加会议,m 个机器限制,k个人投票 (3 ≤ n ≤ 1000, 0 ≤ m ≤ 2000, 0 ≤ k ≤ 5)

解题思路:肯定是 2-sat,k比较小直接枚举3^k。剩下的就是一个模板。

建图:

二元关系直接建图,三元关系枚举成二元判断是否可行,不可行,继续枚举,可行输出答案,知道都枚举完,就无解。反正是一个NP完全问题,所以枚举无伤大雅。二元建图,看我博客2-SAT详解,一看就明白。戳死我

代码语言:javascript
复制
#include <cstdio>
#include <cstring>
#include <vector>
#include <queue>
#include <stack>
#include <cmath>
#include <cstdlib>
#include <algorithm>
#define MAXN 2000+100
#define MAXM 10000+100
using namespace std;
struct Edge
{
    int from, to, next;
};
Edge edge[MAXM], Redge[MAXM];
int head[MAXN], edgenum;
int Rhead[MAXN], Redgenum;//这些数组用于copy 这样就不用再次建已经确定的边了
struct Node
{
    int op, x, y, z;
};
Node num[5];
int low[MAXN], dfn[MAXN];
int sccno[MAXN], scc_cnt;
int dfs_clock;
stack<int> S;
bool Instack[MAXN];
int N, M, K;
void init()
{
    edgenum = 0;
    memset(head, -1, sizeof(head));
}
void addEdge(int u, int v)
{
    Edge E = {u, v, head[u]};
    edge[edgenum] = E;
    head[u] = edgenum++;
}
void input()
{
    int x, y, z, op;
    while(M--)
    {
        scanf("%d%d%d", &op, &x, &y);
        if(op == 1)//x和y至少去一个
        {
            addEdge(y + N, x);//y不去x去
            addEdge(x + N, y);//x不去y去
        }
        else if(op == 2)
        {
            addEdge(y, x);//注意 若y去则x是一定去的
            addEdge(x + N, y + N);//x不去y也不去
        }
        else if(op == 3)//x和y至少一个不去
        {
            addEdge(x, y + N);//x去 y不去
            addEdge(y, x + N);//y去 x不去
        }
        else//两个人只能去一个
        {
            addEdge(x, y + N);
            addEdge(y, x + N);
            addEdge(x + N, y);
            addEdge(y + N, x);
        }
    }
 
    for(int i = 0; i < K; i++)
        scanf("%d%d%d%d", &num[i].op, &num[i].x, &num[i].y, &num[i].z);
    memcpy(Rhead, head, sizeof(head));
    memcpy(Redge, edge, sizeof(edge));
    Redgenum = edgenum;
}
void tarjan(int u, int fa)
{
    int v;
    low[u] = dfn[u] = ++dfs_clock;
    S.push(u);
    Instack[u] = true;
    for(int i = head[u]; i != -1; i = edge[i].next)
    {
        v = edge[i].to;
        if(!dfn[v])
        {
            tarjan(v, u);
            low[u] = min(low[u], low[v]);
        }
        else if(Instack[v])
            low[u] = min(low[u], dfn[v]);
    }
    if(low[u] == dfn[u])
    {
        scc_cnt++;
        for(;;)
        {
            v = S.top(); S.pop();
            Instack[v] = false;
            sccno[v] = scc_cnt;
            if(v == u) break;
        }
    }
}
void find_cut(int l, int r)
{
    memset(low, 0, sizeof(low));
    memset(dfn, 0, sizeof(dfn));
    memset(sccno, 0, sizeof(sccno));
    memset(Instack, false, sizeof(Instack));
    dfs_clock = scc_cnt = 0;
    for(int i = l; i <= r; i++)
        if(!dfn[i]) tarjan(i, -1);
}
int fp[MAXN];//建立SCC间的映射
bool two_sat()//判断当前情况是否成立
{
    find_cut(1, 2*N);
    for(int i = 1; i <= N; i++)
    {
        if(sccno[i] == sccno[i+N])
            return false;
        else
        {
            fp[sccno[i]] = sccno[i+N];
            fp[sccno[i+N]] = sccno[i];
        }
    }
    return true;
}
int k = 1;
vector<int> G[MAXN];//缩点后新图
int in[MAXN];//记录SCC入度
void suodian()//缩点
{
    for(int i = 1; i <= scc_cnt; i++) G[i].clear(), in[i] = 0;
    for(int i = 0; i < edgenum; i++)
    {
        int u = sccno[edge[i].from];
        int v = sccno[edge[i].to];
        if(u != v)
            G[v].push_back(u), in[u]++;
    }
}
int color[MAXN];//染色
void toposort()//拓扑染色
{
    queue<int> Q;
    memset(color, -1, sizeof(color));
    for(int i = 1; i <= scc_cnt; i++) if(in[i] == 0) Q.push(i);
    while(!Q.empty())
    {
        int u = Q.front();
        Q.pop();
        if(color[u] == -1)
        {
            color[u] = 1;
            color[fp[u]] = 0;
        }
        for(int i = 0; i < G[u].size(); i++)
        {
            int v = G[u][i];
            if(--in[v] == 0)
                Q.push(v);
        }
    }
}
void solve()
{
    int State = (int)pow(3, K);//总状态数
    bool flag = false;
    for(int S = 0; S < State; S++)//这里状态下标从1开始或从2开始 都不会影响 注意取值就行了
    {
        memcpy(head, Rhead, sizeof(Rhead));//还原数组
        memcpy(edge, Redge, sizeof(Redge));
        edgenum = Redgenum;
        int T = S;
        for(int i = 0; i < K; i++)//继续枚举状态建图
        {
            int s;
            switch(T % 3)//需要仔细琢磨 这个过程
            {
                case 0: s = num[i].x; break;
                case 1: s = num[i].y; break;
                case 2: s = num[i].z; break;
            }
            T /= 3;
            if(num[i].op == 1)
                addEdge(s + N, s);//s一定去
            else
                addEdge(s, s + N);//s一定不去
        }
        if(two_sat())//成立
        {
            flag = true;
            break;
        }
    }
    printf("Case %d: ", k++);
    if(!flag)
    {
        printf("Impossible.\n");
        return ;
    }
    printf("Possible");
    //输出可行解
    suodian();
    toposort();
    int ans = 0;
    for(int i = 1; i <= N; i++)
    {
        if(color[sccno[i]] == 1)
            ans++;
    }
    printf(" %d", ans);
    for(int i = 1; i <= N; i++)
        if(color[sccno[i]] == 1)
            printf(" %d", i);
    printf(".\n");
}
int main()
{
    int t;
    scanf("%d", &t);
    while(t--)
    {
        scanf("%d%d%d", &N, &M, &K);
        init();
        input();
        solve();
    }
    return 0;
}
本文参与 腾讯云自媒体同步曝光计划,分享自作者个人站点/博客。
原始发表:2019/11/17 ,如有侵权请联系 cloudcommunity@tencent.com 删除

本文分享自 作者个人站点/博客 前往查看

如有侵权,请联系 cloudcommunity@tencent.com 删除。

本文参与 腾讯云自媒体同步曝光计划  ,欢迎热爱写作的你一起参与!

评论
登录后参与评论
0 条评论
热度
最新
推荐阅读
领券
问题归档专栏文章快讯文章归档关键词归档开发者手册归档开发者手册 Section 归档