面向对象的C语言

Seven Du

发布于 2020-12-21 16:17:35

6510

发布于 2020-12-21 16:17:35

文章被收录于专栏：FreeSWITCH中文社区 FreeSWITCH中文社区FreeSWITCH中文社区

大家在学C、C++ 的时候，老师多半会讲过：C语言是面向过程的编程语言，C++是面向对象的编程语言。但归根结底，面向过程还是面向对象，这是编程思想的差异，而不是语言的差异。笔者最近在看baresip源码，C语言也能写成面向对象。

笔者，想了个应用场景，写了个简单的demo。笔者当年的第一份工作，维护BPLA（北洋打印机指令集）SDK，其中重要的一项工作是，通过串口、并口、usb、网络等软硬件接口，发送控制指令。

笔者先创建了一个interface.h文件，相当于C++里的虚类。


typedef void (* p_func_connect) ();
typedef void (* p_func_send_cmd) (char *);
typedef void (* p_func_disconnect) ();

struct interface
{    
    char *name;
   p_func_connect connect;
   p_func_disconnect disconnect;
   p_func_send_cmd send_cmd;
};

然后创建modules文件，并在此文件夹下，创建了usb.c、com.c、driver.c、network.c，分别对应USB、串口、驱动接口、网络接口的实现。相当于C++中，继承虚类的各个子类实现。usb.c如下：


#include "../interface.h"
static void connect() {
    printf("connect by usb\n");
}

static void disconnect() {
    printf("disconnect by usb\n");
}

static void send_cmd(char *cmd) {
    printf("send cmd by usb: %s\n", cmd);
}

const struct interface usb = {    "usb",
   connect,
   disconnect,
   send_cmd
};

为了让这些“类”用起来更优雅些，笔者在interface.h、interface.c中添加了find_device函数，添加了static.c。

interface.c文件


#include "interface.h"

extern const struct interface *interfaces[];

const struct interface * find_device(char *name) {
    int i = 0;    
    struct interface *dev = interfaces[0];    
    
    for (; dev; i++) {
        if (0 == strcmp(name, dev->name)) {
            break;
       }       dev = interfaces[i + 1];
            
   }
    
     return dev;
}

static.c


#include <stdio.h>
#include "interface.h"

extern const struct interface com;
extern const struct interface usb;
extern const struct interface driver;
extern const struct interface network;

const struct interface *interfaces[] = {
   &com,
   &usb,
   &driver,
   &network,
   NULL };

static.c进阶版，Makefile文件动态生成：


MODULES:=$(wildcard ./modules/*.c)
MODULES:=$(patsubst ./modules/%.c, %, $(MODULES))static.c:
   echo "#include <stdio.h>" > $@
   echo "#include \"interface.h\"\n" >> $@    
    for n in $(MODULES); do \
       echo "extern const struct interface $${n};"  >> $@  ; \
   done
   echo "" >> $@
   echo "const struct interface *interfaces[] = {" >> $@    
    for n in $(MODULES); do \
       echo "  &$${n},"  >> $@  ; \
   done
   echo "  NULL };" >> $@

也可根据实际情况，动态设置使用哪些module，如，现在使用的打印机只有usb口和网口。


MODULES:=usb network

最后贴下main.c文件和调用


#include <stdio.h>
#include <stdlib.h>
#include "interface.h"

int main() {
    struct interface *dev = NULL;    
    char name[255];    
    
    while (1) {
        memset(name, 0, 255);
       gets(name);       dev = find_device(name);        
        if (dev) {
           dev->connect();
           dev->send_cmd("print hello world");
           dev->disconnect();
       } else {          
            printf("no such device: %s!\n", name);
       }
   }    
             
     return 0;
}

运行如下：


➜  communication ./main
warning: this program uses gets(), which is unsafe.
usb
connect by usb
send cmd by usb: print hello world
disconnect by usb
network
connect by network
send cmd by network: print hello world
disconnect by network

附：

Makefile文件：


MODULES:=$(wildcard ./modules/*.c)
MODULES:=$(patsubst ./modules/%.c, %, $(MODULES))

SRC:=$(wildcard *.c)
SRC+=$(patsubst %, modules/%.c, $(MODULES))

OBJ:=$(patsubst %.c, %.o, $(SRC))
CC:=gcc -fPIC

all: static.c $(OBJ)
   $(CC) $(OBJ) -o mainstatic.c:
   echo "#include <stdio.h>" > $@
   echo "#include \"interface.h\"\n" >> $@    
    for n in $(MODULES); do \
       echo "extern const struct interface $${n};"  >> $@  ; \
   done
   echo "" >> $@
   echo "const struct interface *interfaces[] = {" >> $@   
    for n in $(MODULES); do \
       echo "  &$${n},"  >> $@  ; \
   done
   echo "  NULL };" >> $@%o:%c
   $(CC) $(CFLAGS) -c $< -o $@

clean:
   rm *.o
   rm ./modules/*.o
   rm main
   rm static.c

本文参与腾讯云自媒体分享计划，分享自微信公众号。

原始发表：2018-02-07，如有侵权请联系 cloudcommunity@tencent.com 删除

c++