Docker - Nginx定制

apt-get install vim

apt-get install lrzsz

apt-get install zip unzip

apt-get install git

vim .vimrc

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 通用设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
let mapleader = ","      " 定义<leader>键
set nocompatible         " 设置不兼容原始vi模式
filetype on              " 设置开启文件类型侦测
filetype plugin on       " 设置加载对应文件类型的插件
set noeb                 " 关闭错误的提示
syntax enable            " 开启语法高亮功能
syntax on                " 自动语法高亮
set t_Co=256             " 开启256色支持
set cmdheight=2          " 设置命令行的高度
set showcmd              " select模式下显示选中的行数
set ruler                " 总是显示光标位置
set laststatus=2         " 总是显示状态栏
set number               " 开启行号显示
set cursorline           " 高亮显示当前行
set whichwrap+=<,>,h,l   " 设置光标键跨行
set ttimeoutlen=0        " 设置<ESC>键响应时间
set virtualedit=block,onemore   " 允许光标出现在最后一个字符的后面

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 代码缩进和排版
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set autoindent           " 设置自动缩进
set cindent              " 设置使用C/C++语言的自动缩进方式
set cinoptions=g0,:0,N-s,(0    " 设置C/C++语言的具体缩进方式
set smartindent          " 智能的选择对其方式
filetype indent on       " 自适应不同语言的智能缩进
set expandtab            " 将制表符扩展为空格
set tabstop=4            " 设置编辑时制表符占用空格数
set shiftwidth=4         " 设置格式化时制表符占用空格数
set softtabstop=4        " 设置4个空格为制表符
set smarttab             " 在行和段开始处使用制表符
set nowrap               " 禁止折行
set backspace=2          " 使用回车键正常处理indent,eol,start等
set sidescroll=10        " 设置向右滚动字符数
set nofoldenable         " 禁用折叠代码

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 代码补全
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set wildmenu             " vim自身命名行模式智能补全
set completeopt-=preview " 补全时不显示窗口，只显示补全列表

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 搜索设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set hlsearch            " 高亮显示搜索结果
set incsearch           " 开启实时搜索功能
set ignorecase          " 搜索时大小写不敏感

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 缓存设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set nobackup            " 设置不备份
set noswapfile          " 禁止生成临时文件
set autoread            " 文件在vim之外修改过，自动重新读入
set autowrite           " 设置自动保存
set confirm             " 在处理未保存或只读文件的时候，弹出确认

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 编码设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set langmenu=zh_CN.UTF-8
set helplang=cn
set termencoding=utf-8
set encoding=utf8
set fileencodings=utf8,ucs-bom,gbk,cp936,gb2312,gb18030

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" gvim/macvim设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
if has("gui_running")
    let system = system('uname -s')
    if system == "Darwin\n"
        set guifont=Droid\ Sans\ Mono\ Nerd\ Font\ Complete:h18 " 设置字体
    else
        set guifont=DroidSansMono\ Nerd\ Font\ Regular\ 18      " 设置字体
    endif
    set guioptions-=m           " 隐藏菜单栏
    set guioptions-=T           " 隐藏工具栏
    set guioptions-=L           " 隐藏左侧滚动条
    set guioptions-=r           " 隐藏右侧滚动条
    set guioptions-=b           " 隐藏底部滚动条
    set showtabline=0           " 隐藏Tab栏
    set guicursor=n-v-c:ver5    " 设置光标为竖线
endif

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 卸载默认插件UnPlug
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
function! s:deregister(repo)
  let repo = substitute(a:repo, '[\/]\+$', '', '')
  let name = fnamemodify(repo, ':t:s?\.git$??')
  call remove(g:plugs, name)
endfunction
command! -nargs=1 -bar UnPlug call s:deregister(<args>)

"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 插件列表
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
call plug#begin('~/.vim/plugged')

Plug 'chxuan/cpp-mode'
Plug 'chxuan/vim-edit'
Plug 'chxuan/change-colorscheme'
Plug 'chxuan/prepare-code'
Plug 'chxuan/vim-buffer'
Plug 'chxuan/vimplus-startify'
Plug 'chxuan/tagbar'
Plug 'Valloric/YouCompleteMe'
Plug 'Yggdroot/LeaderF'
Plug 'mileszs/ack.vim'
Plug 'easymotion/vim-easymotion'
Plug 'haya14busa/incsearch.vim'
Plug 'jiangmiao/auto-pairs'
Plug 'scrooloose/nerdtree'
Plug 'tiagofumo/vim-nerdtree-syntax-highlight'
Plug 'Xuyuanp/nerdtree-git-plugin'
Plug 'godlygeek/tabular'
Plug 'tpope/vim-fugitive'
Plug 'tpope/vim-surround'
Plug 'tpope/vim-commentary'
Plug 'tpope/vim-repeat'
Plug 'tpope/vim-endwise'
Plug 'octol/vim-cpp-enhanced-highlight'
Plug 'vim-airline/vim-airline'
Plug 'vim-airline/vim-airline-themes'
Plug 'ryanoasis/vim-devicons'
Plug 'junegunn/vim-slash'
Plug 'junegunn/gv.vim'
Plug 'kana/vim-textobj-user'
Plug 'kana/vim-textobj-indent'
Plug 'kana/vim-textobj-syntax'
Plug 'kana/vim-textobj-function'
Plug 'sgur/vim-textobj-parameter'
Plug 'Shougo/echodoc.vim'
Plug 'terryma/vim-smooth-scroll'
Plug 'rhysd/clever-f.vim'
Plug 'vim-scripts/indentpython.vim'
Plug 'chr4/nginx.vim'
Plug 'lepture/vim-jinja'

" 加载自定义插件
if filereadable(expand($HOME . '/.vimrc.custom.plugins'))
    source $HOME/.vimrc.custom.plugins
endif

call plug#end()  

" load vim default plugin
runtime macros/matchit.vim

" 编辑vimrc相关配置文件
nnoremap <leader>e :edit $MYVIMRC<cr>
nnoremap <leader>vc :edit ~/.vimrc.custom.config<cr>
nnoremap <leader>vp :edit ~/.vimrc.custom.plugins<cr>

" 查看vimplus的help文件
nnoremap <leader>h :view +let\ &l:modifiable=0 ~/.vimplus/help.md<cr>

" 打开当前光标所在单词的vim帮助文档
nnoremap <leader>H :execute ":help " . expand("<cword>")<cr>

" 重新加载vimrc文件
nnoremap <leader>s :source $MYVIMRC<cr>

" 安装、更新、删除插件
nnoremap <leader><leader>i :PlugInstall<cr>
nnoremap <leader><leader>u :PlugUpdate<cr>
nnoremap <leader><leader>c :PlugClean<cr>

" 分屏窗口移动
nnoremap <c-j> <c-w>j
nnoremap <c-k> <c-w>k
nnoremap <c-h> <c-w>h
nnoremap <c-l> <c-w>l

" 复制当前选中到系统剪切板
vmap <leader><leader>y "+y

" 将系统剪切板内容粘贴到vim
nnoremap <leader><leader>p "+p

" 打开文件自动定位到最后编辑的位置
autocmd BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | execute "normal! g'\"" | endif

" 主题设置
set background=dark
let g:onedark_termcolors=256
colorscheme onedark

" airline
let g:airline_theme="onedark"
let g:airline_powerline_fonts = 1
let g:airline#extensions#tabline#enabled = 1
if !exists('g:airline_symbols')
    let g:airline_symbols = {}
endif
let g:airline_left_sep = ''
let g:airline_left_alt_sep = ''
let g:airline_right_sep = ''
let g:airline_right_alt_sep = ''

" cpp-mode
nnoremap <leader>y :CopyCode<cr>
nnoremap <leader>p :PasteCode<cr>
nnoremap <leader>U :GoToFunImpl<cr>
nnoremap <silent> <leader>a :Switch<cr>
nnoremap <leader><leader>fp :FormatFunParam<cr>
nnoremap <leader><leader>if :FormatIf<cr>
nnoremap <leader><leader>t dd :GenTryCatch<cr>
xnoremap <leader><leader>t d :GenTryCatch<cr>

" change-colorscheme
nnoremap <silent> <F9> :PreviousColorScheme<cr>
inoremap <silent> <F9> <esc> :PreviousColorScheme<cr>
nnoremap <silent> <F10> :NextColorScheme<cr>
inoremap <silent> <F10> <esc> :NextColorScheme<cr>
nnoremap <silent> <F11> :RandomColorScheme<cr>
inoremap <silent> <F11> <esc> :RandomColorScheme<cr>
nnoremap <silent> <F12> :ShowColorScheme<cr>
inoremap <silent> <F12> <esc> :ShowColorScheme<cr>

" prepare-code
let g:prepare_code_plugin_path = expand($HOME . "/.vim/plugged/prepare-code")

" vim-buffer
nnoremap <silent> <c-p> :PreviousBuffer<cr>
nnoremap <silent> <c-n> :NextBuffer<cr>
nnoremap <silent> <leader>d :CloseBuffer<cr>
nnoremap <silent> <leader>D :BufOnly<cr>

" vim-edit
nnoremap Y :CopyText<cr>
nnoremap D :DeleteText<cr>
nnoremap C :ChangeText<cr>
nnoremap <leader>r :ReplaceTo<space>

" nerdtree
nnoremap <silent> <leader>n :NERDTreeToggle<cr>
let g:NERDTreeFileExtensionHighlightFullName = 1
let g:NERDTreeExactMatchHighlightFullName = 1
let g:NERDTreePatternMatchHighlightFullName = 1
let g:NERDTreeHighlightFolders = 1         
let g:NERDTreeHighlightFoldersFullName = 1 
let g:NERDTreeDirArrowExpandable='▷'
let g:NERDTreeDirArrowCollapsible='▼'

" YCM
" 如果不指定python解释器路径，ycm会自己搜索一个合适的(与编译ycm时使用的python版本匹配)
" let g:ycm_server_python_interpreter = '/usr/bin/python2.7'
let g:ycm_confirm_extra_conf = 0 
let g:ycm_error_symbol = '✗'
let g:ycm_warning_symbol = '✹'
let g:ycm_seed_identifiers_with_syntax = 1 
let g:ycm_complete_in_comments = 1 
let g:ycm_complete_in_strings = 1 
let g:ycm_collect_identifiers_from_tags_files = 1
let g:ycm_semantic_triggers =  {
            \   'c' : ['->', '.','re![_a-zA-z0-9]'],
            \   'objc' : ['->', '.', 're!\[[_a-zA-Z]+\w*\s', 're!^\s*[^\W\d]\w*\s',
            \             're!\[.*\]\s'],
            \   'ocaml' : ['.', '#'],
            \   'cpp,objcpp' : ['->', '.', '::','re![_a-zA-Z0-9]'],
            \   'perl' : ['->'],
            \   'php' : ['->', '::'],
            \   'cs,java,javascript,typescript,d,python,perl6,scala,vb,elixir,go' : ['.'],
            \   'ruby' : ['.', '::'],
            \   'lua' : ['.', ':'],
            \   'erlang' : [':'],
            \ }
nnoremap <leader>u :YcmCompleter GoToDeclaration<cr>
" 已经使用cpp-mode插件提供的转到函数实现的功能
" nnoremap <leader>i :YcmCompleter GoToDefinition<cr> 
nnoremap <leader>o :YcmCompleter GoToInclude<cr>
nnoremap <leader>ff :YcmCompleter FixIt<cr>
nmap <F5> :YcmDiags<cr>

" tagbar
let g:tagbar_width = 30
nnoremap <silent> <leader>t :TagbarToggle<cr>

" incsearch.vim
map /  <Plug>(incsearch-forward)
map ?  <Plug>(incsearch-backward)
map g/ <Plug>(incsearch-stay)

" vim-easymotion
let g:EasyMotion_smartcase = 1
map <leader>w <Plug>(easymotion-bd-w)
nmap <leader>w <Plug>(easymotion-overwin-w)

" nerdtree-git-plugin
let g:NERDTreeGitStatusIndicatorMapCustom = {
            \ "Modified"  : "✹",
            \ "Staged"    : "✚",
            \ "Untracked" : "✭",
            \ "Renamed"   : "➜",
            \ "Unmerged"  : "═",
            \ "Deleted"   : "✖",
            \ "Dirty"     : "✗",
            \ "Clean"     : "✔︎",
            \ 'Ignored'   : '☒',
            \ "Unknown"   : "?"
            \ }

" LeaderF
nnoremap <leader>f :LeaderfFile .<cr>
let g:Lf_WildIgnore = {
            \ 'dir': ['.svn','.git','.hg','.vscode','.wine','.deepinwine','.oh-my-zsh'],
            \ 'file': ['*.sw?','~$*','*.bak','*.exe','*.o','*.so','*.py[co]']
            \}
let g:Lf_UseCache = 0

" ack
nnoremap <leader>F :Ack!<space>

" echodoc.vim
let g:echodoc_enable_at_startup = 1

" tabular
nnoremap <leader>l :Tab /\|<cr>
nnoremap <leader>= :Tab /=<cr>

" vim-smooth-scroll
noremap <silent> <c-u> :call smooth_scroll#up(&scroll, 0, 2)<CR>
noremap <silent> <c-d> :call smooth_scroll#down(&scroll, 0, 2)<CR>
noremap <silent> <c-b> :call smooth_scroll#up(&scroll*2, 0, 4)<CR>
noremap <silent> <c-f> :call smooth_scroll#down(&scroll*2, 0, 4)<CR>

" gv
nnoremap <leader>g :GV<cr>
nnoremap <leader>G :GV!<cr>
nnoremap <leader>gg :GV?<cr>

" 加载自定义配置
if filereadable(expand($HOME . '/.vimrc.custom.config'))
    source $HOME/.vimrc.custom.config
endif

./install.sh

Vim /etc/nginx/nginx.conf

user  nginx;
worker_processes  1;

error_log  /var/log/nginx/error.log warn;
pid        /var/run/nginx.pid;


events {
	use   epoll;
    worker_connections  1024;
}


http {
    include       /etc/nginx/mime.types;
    default_type  application/octet-stream;

    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                      '$status $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_x_forwarded_for"';

    access_log  /var/log/nginx/access.log  main;

    sendfile       on;
    
	tcp_nopush     on;
	tcp_nodelay    on;
	
    keepalive_timeout  65;

	fastcgi_connect_timeout 300;
    fastcgi_send_timeout 300;
    fastcgi_read_timeout 300;
    fastcgi_buffer_size 64k;
    fastcgi_buffers 4 64k;
    fastcgi_busy_buffers_size 128k;
    fastcgi_temp_file_write_size 128k;

    gzip  on;
	gzip_disable "MSIE [1-6].";
    gzip_min_length 1k;
    gzip_buffers 4 16k;
    gzip_http_version 1.0;
    gzip_comp_level 2;
		
    include /nginx/*.conf; //指定配置路径
}

server {
    listen       80;
    listen  [::]:80;
    server_name  localhost;

    charset utf-8;

    #rewrite ^(.*) https://$server_name$1 permanent;

    location / {
        root   /web/dist;
        index  index.html index.htm index.php;
    }
}

server {

    listen       443 ssl;
    server_name locathost;
    
    ssl_certificate /ssl/.pem; 
    ssl_certificate_key /ssl/.key;
    ssl_session_timeout 5m;
    ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE:ECDH:AES:HIGH:!NULL:!aNULL:!MD5:!ADH:!RC4;
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
    ssl_prefer_server_ciphers on;
    
    client_max_body_size 1024M;

    location / {
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header Host $http_host;
    }
}

docker commit -a [作者名] -p -m [简介] [容器ID] [名字]:[版本号]

sudo docker login --username=[] registry.cn-qingdao.aliyuncs.com

sudo docker tag [ImageId] [仓库地区]/[仓库命名空间]/[仓库名称]:[镜像版本号]

sudo docker tag [ImageId] registry.cn-qingdao.aliyuncs.com/newtouch/nginx:[镜像版本号]

sudo docker push [仓库地区]/[仓库命名空间]/[仓库名称]:[镜像版本号]

sudo docker push registry.cn-qingdao.aliyuncs.com/newtouch/nginx:2.0