查看当前网卡信息
[root@Jaking ~]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.3 (Maipo)
[root@Jaking ~]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.10.11 netmask 255.255.255.0 broadcast 192.168.10.255
inet6 fe80::250:56ff:fe2b:88bf prefixlen 64 scopeid 0x20
ether 00:50:56:2b:88:bf txqueuelen 1000 (Ethernet)
RX packets 454 bytes 44638 (43.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 339 bytes 33150 (32.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1 (Local Loopback)
RX packets 112 bytes 9492 (9.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 112 bytes 9492 (9.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
添加网卡
取消红框内的钩
查看网卡信息
[root@Jaking ~]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.10.11 netmask 255.255.255.0 broadcast 192.168.10.255
inet6 fe80::250:56ff:fe2b:88bf prefixlen 64 scopeid 0x20
ether 00:50:56:2b:88:bf txqueuelen 1000 (Ethernet)
RX packets 488 bytes 47935 (46.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 356 bytes 35698 (34.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ens38: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 00:0c:29:46:f9:b8 txqueuelen 1000 (Ethernet)
RX packets 5 bytes 594 (594.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1 (Local Loopback)
RX packets 112 bytes 9492 (9.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 112 bytes 9492 (9.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
配置网卡并更改网卡接口
[root@Jaking ~]# cd /etc/sysconfig/network-scripts/
[root@Jaking network-scripts]# ls
ifcfg-ens33 ifdown-ipv6 ifdown-TeamPort ifup-ippp ifup-routes network-functions
ifcfg-lo ifdown-isdn ifdown-tunnel ifup-ipv6 ifup-sit network-functions-ipv6
ifdown ifdown-post ifup ifup-isdn ifup-Team
ifdown-bnep ifdown-ppp ifup-aliases ifup-plip ifup-TeamPort
ifdown-eth ifdown-routes ifup-bnep ifup-plusb ifup-tunnel
ifdown-ib ifdown-sit ifup-eth ifup-post ifup-wireless
ifdown-ippp ifdown-Team ifup-ib ifup-ppp init.ipv6-global
添加网卡后,需要创建对应的网卡配置文件
[root@Jaking network-scripts]# cp ifcfg-ens33 ifcfg-ens34
[root@Jaking network-scripts]# vim ifcfg-ens34
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
NAME=ens34
DEVICE=ens34
ONBOOT=yes
IPADDR=172.16.100.100
NETMASK=255.255.255.0
禁用ens38接口
[root@Jaking network-scripts]# ip link set ens38 down
[root@Jaking network-scripts]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.10.11 netmask 255.255.255.0 broadcast 192.168.10.255
inet6 fe80::250:56ff:fe2b:88bf prefixlen 64 scopeid 0x20
ether 00:50:56:2b:88:bf txqueuelen 1000 (Ethernet)
RX packets 812 bytes 74791 (73.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 537 bytes 61780 (60.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1 (Local Loopback)
RX packets 112 bytes 9492 (9.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 112 bytes 9492 (9.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
重命名ens38接口为ens34
[root@Jaking network-scripts]# ip link set ens38 name ens34
启用修改完成的ens34接口
[root@Jaking network-scripts]# ip link set ens34 up
[root@Jaking network-scripts]# systemctl restart network
[root@Jaking network-scripts]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.10.11 netmask 255.255.255.0 broadcast 192.168.10.255
inet6 fe80::250:56ff:fe2b:88bf prefixlen 64 scopeid 0x20
ether 00:50:56:2b:88:bf txqueuelen 1000 (Ethernet)
RX packets 1389 bytes 123239 (120.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 913 bytes 117924 (115.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ens34: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.100.100 netmask 255.255.255.0 broadcast 192.168.100.255
ether 00:0c:29:46:f9:b8 txqueuelen 1000 (Ethernet)
RX packets 5 bytes 594 (594.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2 bytes 120 (120.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1 (Local Loopback)
RX packets 148 bytes 12552 (12.2 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 148 bytes 12552 (12.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
总结
以上就是给RHEL7添加一张自定义网卡并更改网卡接口的方法,希望能帮助到大家!
原创声明:本文系作者授权腾讯云开发者社区发表,未经许可,不得转载。
如有侵权,请联系 cloudcommunity@tencent.com 删除。
原创声明:本文系作者授权腾讯云开发者社区发表,未经许可,不得转载。
如有侵权,请联系 cloudcommunity@tencent.com 删除。