快速去掉不用的linux kernel模块
快速去掉不用的linux kernel模块
由于要满足尽量多的客户需求，Xilinx的默认linux kernel的配置，包含了尽可能多的常用模块。实际嵌入式产品中，很多模块用不到。
如果在linux kernel的编译目录，搜索所有目标(.o)文件，就能发现那些模块被编译到linux kernel中。对于不用的模块，可以配置linux kernel，去掉它们。
PetaLinux工程，修改linux kernel的配置后，保存在文件project-spec/meta-user/recipes-kernel/linux/bsp.cfg里。
/zcu106-bsp-kernel-cfg-peta/project-spec/meta-user/recipes-kernel/linux$ tree -L 2
linux-xlnx
bsp.cfg
linux-xlnx_%.bbappend如果想快速去掉不用的模块，可以在文件project-spec/meta-user/recipes-kernel/linux/bsp.cfg里，添加如下内容，去掉不用的无线网络、虚拟化模块等。注意，请检查下面的项目，确保你的产品不会用到。如果要用到某些项目，请从bsp.cfg里中删除。
# CONFIG_EFI is not set
# CONFIG_BT is not set
# CONFIG_CFG80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_IIO is not set
# CONFIG_EXT3_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_OVERLAY_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_PARAVIRT is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_CGROUPS is not set
# CONFIG_XEN is not set
# CONFIG_NAMESPACES is not set如果产品中不使用声音，还可以增加下面两行，去掉声音模块。
# CONFIG_SND is not set
# CONFIG_SOUND is not set测试版本： 2021.2
本文参与 腾讯云自媒体分享计划，分享自作者个人站点/博客。
原始发表：2021-12-09 ，如有侵权请联系 cloudcommunity@tencent.com 删除
评论
登录后参与评论
推荐阅读
目录