SpringBoot整合Druid、Oracle、P6spy服务

<!--druid数据库连接池-->
<dependency>
    <groupId>com.alibaba</groupId>
    <artifactId>druid</artifactId>
    <version>1.1.23</version>
</dependency>
<!--如果要用oracle，放开下面的注释-->
<dependency>
    <groupId>com.oracle</groupId>
    <artifactId>ojdbc6</artifactId>
    <version>11.2.0.3</version>
</dependency>
<!--如果要用mysql,放开下面的注释-->
<!--<dependency>
    <groupId>mysql</groupId>
    <artifactId>mysql-connector-java</artifactId>
    <version>8.0.18</version>
</dependency>-->
<!--p6spy-->
<!--p6spy将应用的数据源给劫持了，应用操作数据库其实在调用p6spy的数据源，p6spy劫持到需-->
<!--要执行的sql或者hql之类的语句之后，他自己去调用一个realDatasource，再去操作数据库.-->
<dependency>
    <groupId>p6spy</groupId>
    <artifactId>p6spy</artifactId>
    <version>3.9.1</version>
</dependency>

spring:
  # oracle数据库
  datasource:
    url: jdbc:p6spy:oracle:thin:@127.0.0.1:1521:xe
    username: system
    password: oracle
    driver-class-name: com.p6spy.engine.spy.P6SpyDriver

# 要加载和注册的 JDBC 驱动程序的逗号分隔列表.
# (默认为空)
#
# 注意：这通常只有在使用 P6Spy 时才需要
# 具有 JNDI 数据源的应用程序服务器环境或何时
# 使用未实现 JDBC 4.0 API 的 JDBC 驱动程序
# (特别是自动注册).
# oracle
driverlist=oracle.jdbc.OracleDriver
# mysql
#driverlist=com.mysql.cj.jdbc.Driver

# 用于根据语句刷新
# (默认为false)
#autoflush=false

# 使用 Java 的 SimpleDateFormat 例程设置日期格式.
# 如果未设置属性，则使用自 1.1.1970（unix 时间）以来的毫秒数（默认为空）
#dateformat=

# 为记录的每个语句打印堆栈跟踪
#stacktrace=false
# 如果 stacktrace=true，指定要打印的堆栈跟踪
#stacktraceclass=

# 确定是否应重新加载属性文件请注意：重新加载意味着忘记所有先前设置的设置
# （即使是在运行时设置的设置 - 通过 JMX）并从清理表开始（默认为 false）
#reloadproperties=false

# 确定应在几秒钟内重新加载的频率
# (default is 60)
#reloadpropertiesinterval=60

# 指定用于记录的附加程序
# Please note: reload means forgetting all the previously set
# settings (even those set during runtime - via JMX)
# and starting with the clean table
# (only the properties read from the configuration file)
# (default is com.p6spy.engine.spy.appender.FileLogger)
#appender=com.p6spy.engine.spy.appender.Slf4JLogger
appender=com.p6spy.engine.spy.appender.StdoutLogger
#appender=com.p6spy.engine.spy.appender.FileLogger

# name of logfile to use, note Windows users should make sure to use forward slashes in their pathname (e:/test/spy.log)
# (used for com.p6spy.engine.spy.appender.FileLogger only)
# (default is spy.log)
logfile=spy.log

# append to the p6spy log file. if this is set to false the
# log file is truncated every time. (file logger only)
# (default is true)
append=true

# class to use for formatting log messages (default is: com.p6spy.engine.spy.appender.SingleLineFormat)
#logMessageFormat=com.p6spy.engine.spy.appender.SingleLineFormat

# Custom log message format used ONLY IF logMessageFormat is set to com.p6spy.engine.spy.appender.CustomLineFormat
# default is %(currentTime)|%(executionTime)|%(category)|connection%(connectionId)|%(sqlSingleLine)
# Available placeholders are:
#   %(connectionId)            the id of the connection
#   %(currentTime)             the current time expressing in milliseconds
#   %(executionTime)           the time in milliseconds that the operation took to complete
#   %(category)                the category of the operation
#   %(effectiveSql)            the SQL statement as submitted to the driver
#   %(effectiveSqlSingleLine)  the SQL statement as submitted to the driver, with all new lines removed
#   %(sql)                     the SQL statement with all bind variables replaced with actual values
#   %(sqlSingleLine)           the SQL statement with all bind variables replaced with actual values, with all new lines removed
#   %(url)                     the database url where the sql statement executed
#customLogMessageFormat=%(currentTime)|%(executionTime)|%(category)|connection%(connectionId)|%(sqlSingleLine)

# format that is used for logging of the java.util.Date implementations (has to be compatible with java.text.SimpleDateFormat)
# (default is yyyy-MM-dd'T'HH:mm:ss.SSSZ)
#databaseDialectDateFormat=yyyy-MM-dd'T'HH:mm:ss.SSSZ

# format that is used for logging of the java.sql.Timestamp implementations (has to be compatible with java.text.SimpleDateFormat)
# (default is yyyy-MM-dd'T'HH:mm:ss.SSSZ)
#databaseDialectTimestampFormat=yyyy-MM-dd'T'HH:mm:ss.SSSZ

# format that is used for logging booleans, possible values: boolean, numeric
# (default is boolean)
# databaseDialectBooleanFormat=boolean

# Specifies the format for logging binary data. Not applicable if excludebinary is true.
# (default is com.p6spy.engine.logging.format.HexEncodedBinaryFormat)
#databaseDialectBinaryFormat=com.p6spy.engine.logging.format.PostgreSQLBinaryFormat
#databaseDialectBinaryFormat=com.p6spy.engine.logging.format.MySQLBinaryFormat
#databaseDialectBinaryFormat=com.p6spy.engine.logging.format.HexEncodedBinaryFormat

# whether to expose options via JMX or not
# (default is true)
#jmx=true

# if exposing options via jmx (see option: jmx), what should be the prefix used?
# jmx naming pattern constructed is: com.p6spy(.<jmxPrefix>)?:name=<optionsClassName>
# please note, if there is already such a name in use it would be unregistered first (the last registered wins)
# (default is none)
#jmxPrefix=

# if set to true, the execution time will be measured in nanoseconds as opposed to milliseconds
# (default is false)
#useNanoTime=false

#################################################################
# DataSource replacement                                        #
#                                                               #
# Replace the real DataSource class in your application server  #
# configuration with the name com.p6spy.engine.spy.P6DataSource #
# (that provides also connection pooling and xa support).       #
# then add the JNDI name and class name of the real             #
# DataSource here                                               #
#                                                               #
# Values set in this item cannot be reloaded using the          #
# reloadproperties variable. Once it is loaded, it remains      #
# in memory until the application is restarted.                 #
#                                                               #
#################################################################
#realdatasource=/RealMySqlDS
#realdatasourceclass=com.mysql.jdbc.jdbc2.optional.MysqlDataSource

#################################################################
# DataSource properties                                         #
#                                                               #
# If you are using the DataSource support to intercept calls    #
# to a DataSource that requires properties for proper setup,    #
# define those properties here. Use name value pairs, separate  #
# the name and value with a semicolon, and separate the         #
# pairs with commas.                                            #
#                                                               #
# The example shown here is for mysql                           #
#                                                               #
#################################################################
#realdatasourceproperties=port;3306,serverName;myhost,databaseName;jbossdb,foo;bar

#################################################################
# JNDI DataSource lookup                                        #
#                                                               #
# If you are using the DataSource support outside of an app     #
# server, you will probably need to define the JNDI Context     #
# environment.                                                  #
#                                                               #
# If the P6Spy code will be executing inside an app server then #
# do not use these properties, and the DataSource lookup will   #
# use the naming context defined by the app server.             #
#                                                               #
# The two standard elements of the naming environment are       #
# jndicontextfactory and jndicontextproviderurl. If you need    #
# additional elements, use the jndicontextcustom property.      #
# You can define multiple properties in jndicontextcustom,      #
# in name value pairs. Separate the name and value with a       #
# semicolon, and separate the pairs with commas.                #
#                                                               #
# The example shown here is for a standalone program running on #
# a machine that is also running JBoss, so the JNDI context     #
# is configured for JBoss (3.0.4).                              #
#                                                               #
# (by default all these are empty)                              #
#################################################################
#jndicontextfactory=org.jnp.interfaces.NamingContextFactory
#jndicontextproviderurl=localhost:1099
#jndicontextcustom=java.naming.factory.url.pkgs;org.jboss.naming:org.jnp.interfaces

#jndicontextfactory=com.ibm.websphere.naming.WsnInitialContextFactory
#jndicontextproviderurl=iiop://localhost:900

################################################################
# P6 LOGGING SPECIFIC PROPERTIES                               #
################################################################

# filter what is logged
# please note this is a precondition for usage of: include/exclude/sqlexpression
# (default is false)
#filter=false

# comma separated list of strings to include
# please note that special characters escaping (used in java) has to be done for the provided regular expression
# (default is empty)
#include=
# comma separated list of strings to exclude
# (default is empty)
#exclude=

# sql expression to evaluate if using regex
# please note that special characters escaping (used in java) has to be done for the provided regular expression
# (default is empty)
#sqlexpression=

#list of categories to exclude: error, info, batch, debug, statement,
#commit, rollback, result and resultset are valid values
# (default is info,debug,result,resultset,batch)
#excludecategories=info,debug,result,resultset,batch

#whether the binary values (passed to DB or retrieved ones) should be logged with placeholder: [binary] or not.
# (default is false)
#excludebinary=false

# 执行阈值适用于 P6Spy 的标准日志记录。
# 虽然标准日志记录会注销每个语句
# 无论其执行时间如何，此功能都会设置时间
# 该记录的条件。只有已采取的声明
# 长于指定的时间（以毫秒为单位）将是
# 记录。这样就可以只看到声明
# 已经超过了一些高水位线。
# 这一次是可以重新加载的。
# executionThreshold=integer time (milliseconds)
# (default is 0)
#executionThreshold=

################################################################
# P6 OUTAGE SPECIFIC PROPERTIES                                #
################################################################
# Outage Detection

# 此功能检测可能表明数据库中断问题的长时间运行的语句。
# 如果启用此功能，它将记录在执行期间超过可配置时间边界的任何语句。
# 启用此功能后，除了长时间运行的语句外，不会记录其他语句。间隔属性是以秒为单位设置的边界时间。例如，如果将其设置为 \
# 2，则将记录任何需要至少 2 秒的语句。
# 请注意，只要执行相同的语句，它将继续被记录。
# 因此，如果间隔设置为 2，并且查询需要 11 秒，它将被记录 5 次（以 2、4、6、8、10 秒的间隔）。
# outagedetection=true|false
# outagedetectioninterval=integer time (seconds)
# (默认为false)
# outagedetection=false
# (default is 60)
#outagedetectioninterval=30