一般选择业务低点进行数据库操作,目的是为了降低业务风险,和数据丢失的风险
通过监控历史数据可以确定这个时间窗口
由于集群软件在侦测到主服务器失效后会干预相关资源,造成备机身份切换和IP飘移,为了避免这种影响,要关掉集群
[mysql@slave02 bin]$ masterha_check_status --conf=/etc/app1.cnf
app1 (pid:18911) is running(0:PING_OK), master:origin-master
[mysql@slave02 bin]$ masterha_stop --conf=/etc/app1.cnf
Stopped app1 successfully.
[mysql@slave02 bin]$ masterha_check_status --conf=/etc/app1.cnf
app1 is stopped(2:NOT_RUNNING).
[mysql@slave02 bin]$ ps faux | grep manager
mysql 27192 0.0 0.0 103244 864 pts/2 S+ 00:23 0:00 \_ grep manager
[mysql@slave02 bin]$
此目的是为了减少三个keepalived之间协商优先级的时间
[root@slave01 tmp]# ps faux | grep keep
root 25745 0.0 0.0 103244 864 pts/0 S+ 00:25 0:00 \_ grep keep
root 17798 0.0 0.0 110196 432 ? Ss Aug12 12:49 /usr/sbin/keepalived -D
root 17799 0.0 0.0 112300 1564 ? S Aug12 13:18 \_ /usr/sbin/keepalived -D
root 17800 0.0 0.0 112300 1036 ? S Aug12 88:32 \_ /usr/sbin/keepalived -D
[root@slave01 tmp]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:50:56:93:7c:78 brd ff:ff:ff:ff:ff:ff
inet 192.168.66.123/24 brd 192.168.66.255 scope global eth0
inet6 fe80::250:56ff:fe93:7c78/64 scope link
valid_lft forever preferred_lft forever
[root@slave01 tmp]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
router_id LVS_slave01
}
vrrp_instance VI_3 {
state MASTER
interface eth0
virtual_router_id 3
priority 85
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.66.6/24
}
}
[root@slave01 tmp]# /etc/init.d/keepalived stop
Stopping keepalived: [ OK ]
[root@slave01 tmp]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:50:56:93:7c:78 brd ff:ff:ff:ff:ff:ff
inet 192.168.66.123/24 brd 192.168.66.255 scope global eth0
inet6 fe80::250:56ff:fe93:7c78/64 scope link
valid_lft forever preferred_lft forever
[root@slave01 tmp]# ps faux | grep keep
root 28544 0.0 0.0 103244 864 pts/0 S+ 00:28 0:00 \_ grep keep
[root@slave01 tmp]#
本文系转载,前往查看
如有侵权,请联系 cloudcommunity@tencent.com 删除。
本文系转载,前往查看
如有侵权,请联系 cloudcommunity@tencent.com 删除。