华为、思科基本命令对比大全
原创
华为工程师经常要查询思科设备的命令，思科工程师经常要查询华为设备的命令，或者一个项目中，设备种类多，这个时候命令对比大全就起作用了。
锐捷的命令和思科的命令相似，华三和华为的命令相似，所以这张表也可以粗略的认为是华为、华三、思科、锐捷的命令对比，所以基本的命令对比好，那就游刃有余了。
表格中展示的都是基本命令，进阶命令，后期整理。
Huawei | Cisco |
|---|---|
system-view | configure terminal |
return | end |
snmp-agent | snmp-server |
sysname | hostname |
bgp | router bgp |
ospf | router ospf |
rip | router rip |
shutdown / undo shutdown | shutdown / no shutdown |
tracert | traceroute |
screen-length 0 temporary | terminal length 0 |
display | show |
display version | show version |
display history-command | show history-command |
display interface | show interfaces |
display ip interface | show ip interface |
display ip routing-table | show ip route |
display bgp routing-table | show ip bgp |
display clock | show clock |
dir flash: | show flash |
display logbuffer | show logging |
display snmp-agent statistics | show snmp |
display users | show users |
display diagnostic-information | show tech-support |
display current-configuration | write terminal / show running-config |
display saved-configuration | more nvram:startup-config / show startup-config |
reset saved-configuration | write erase |
save | write memory / copy running-config startup-config |
reset | clear |
reset counters interface | clear counters |
reset counters interface | clear interface |
reset acl counter all | clear access-list counters |
undo | no |
debugging / undo debugging | debug / no debug |
reboot | reload |
super | enable |
super 0 | disable |
delete | erase |
ping | ping |
display port | show port |
telnet | telnet |
terminal monitor | terminal monitor |
quit | exit |
原创声明：本文系作者授权腾讯云开发者社区发表，未经许可，不得转载。
如有侵权，请联系 cloudcommunity@tencent.com 删除。
原创声明：本文系作者授权腾讯云开发者社区发表，未经许可，不得转载。
如有侵权，请联系 cloudcommunity@tencent.com 删除。
腾讯云开发者
