tcpdump如何对特定的tcp标志位进行过滤
根据tcp保文结构可知，TCP标志头位于头的第14字节中，因为编号从0字节开始，所以TCP标志头在第13字节。
字节13最多可以包含8个单比特标志；但是，TCP只能使用6个标志。其他两个位是保留的，应该设置为零。
对于只有一个标志的TCP头，每一位都有一个字节，字节13包含以下十进制的二进制值。
- Final (FIN) = 1
- Sync (SYN) = 2
- Reset (RST) = 4
- Push (PSH) = 8
- Acknowledgement (ACK) = 16
- Urgent (URG) = 32
- Reserved = 64 and 128
如果为TCP头设置了多个标志，字节13的值是所有被设置的位的二进制值之和。例如
- FIN, ACK = 17 (1 + 16)
- SYN, ACK = 18 (2 + 16)
- PSH, ACK = 24 (8 + 16)
- FIN, PSH = 9 (1 + 8)
- FIN, PSH, ACK = 25 (1 + 8 + 16)
用过滤SYN举例
[root@ucloud ~]
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
23:28:45.929246 IP 113.65.30.42.jomamqmonitor > 10.13.132.171.ssh: Flags [S], seq 356758948, win 64240, options [mss 1412,nop,wscale 8,nop,nop,sackOK], length 0
23:28:55.109148 IP 113.65.30.42.netscript > 10.13.132.171.ssh: Flags [S], seq 1672259268, win 64240, options [mss 1412,nop,wscale 8,nop,nop,sackOK], length 0
23:29:06.584163 IP 128.199.4.167.45848 > 10.13.132.171.ssh: Flags [S], seq 572498397, win 42340, options [mss 1412,sackOK,TS val 2388703754 ecr 0,nop,wscale 8], length 0假如需要过滤SYN+ACK的包，则是SYN, ACK = 18 (2 + 16)。像这样
[root@ucloud ~]
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
23:30:41.332866 IP 10.13.132.171.ssh > 113.65.30.42.macbak: Flags [S.], seq 1578017406, ack 2299936850, win 64952, options [mss 1412,nop,nop,sackOK,nop,wscale 8], length 0
23:30:43.381328 IP 10.13.132.171.ssh > 188.166.240.30.34898: Flags [S.], seq 3237261487, ack 715567311, win 64400, options [mss 1412,sackOK,TS val 498768258 ecr 1839524773,nop,wscale 8], length 0
23:30:45.616443 IP 10.13.132.171.ssh > 113.65.30.42.wcpp: Flags [S.], seq 3406886282, ack 1487533276, win 64952, options [mss 1412,nop,nop,sackOK,nop,wscale 8], length 0本文参与 腾讯云自媒体同步曝光计划，分享自作者个人站点/博客。
原始发表：2022-06-23，如有侵权请联系 cloudcommunity@tencent.com 删除
评论
登录后参与评论
推荐阅读
腾讯云开发者
