gin框架的几种热加载方法，你值得拥有

$ go get -u github.com/cosmtrek/air

# 1. 进入你自己的项目目录
$ cd /your_project
# 2. 查找你的项目中是否存在 `.air.conf` 配置文件
$ air -c .air.conf
# 3. 没有则创建一个
$ touch .air.conf
# 4. 复制下面示例 `air.conf.example`到你的 `.air.conf`

# 5. 启动热加载
$ air 
# 6. 启动热加载 带打印log
$ air -d

root = "."
tmp_dir = "tmp"

[build]
# Just plain old shell command. You could use `make` as well.
cmd = "go build -o ./tmp/main ."
# Binary file yields from `cmd`.
bin = "tmp/main"
# Customize binary.
full_bin = "APP_ENV=dev APP_USER=air ./tmp/main"
# Watch these filename extensions.
include_ext = ["go", "tpl", "tmpl", "html"]
# Ignore these filename extensions or directories.
exclude_dir = ["assets", "tmp", "vendor", "frontend/node_modules"]
# Watch these directories if you specified.
include_dir = []
# Exclude files.
exclude_file = []
# This log file places in your tmp_dir.
log = "air.log"
# It's not necessary to trigger build each time file changes if it's too frequent.
delay = 1000 # ms
# Stop running old binary when build errors occur.
stop_on_error = true
# Send Interrupt signal before killing process (windows does not support this feature)
send_interrupt = false
# Delay after sending Interrupt signal
kill_delay = 500 # ms

[log]
# Show log time
time = false

[color]
# Customize each part's color. If no color found, use the raw app log.
main = "magenta"
watcher = "cyan"
build = "yellow"
runner = "green"

[misc]
# Delete tmp directory on exit
clean_on_exit = true

$ go get github.com/pilu/fresh

# 进入你的项目目录
$ cd /your_project
# 启动
$ fresh

# To install bee use the go get command:
$ go get github.com/beego/bee
# If you already have bee installed, updating bee is simple:
$ go get -u github.com/beego/bee
# Then you can add bee binary to PATH environment variable in your ~/.bashrc or ~/.bash_profile file:
$ export PATH=$PATH:<your_main_gopath>/bin

# 进入你的项目目录，注意：使用bee 项目必须要在GOPATH目录下
$ cd /your_project
# 运行程序
$ bee run

$ go get github.com/silenceper/gowatch

$ gowatch -o ./bin/demo -p ./cmd/demo

# gowatch.yml 配置示例

# 当前目录执行下生成的可执行文件的名字，默认是当前目录名
appname: "test"
# 指定编译后的目标文件目录
output: /bin/demo
# 需要追加监听的文件名后缀，默认只有'.go'文件
watch_exts:
    - .yml
# 需要监听的目录，默认只有当前目录
watch_paths:
    - ../pk
# 在执行命令时，需要增加的其他参数
cmd_args:
    - arg1=val1
# 在构建命令时，需要增加的其他参数
build_args:
    - -race
# 需要增加环境变量，默认已加载当前环境变量
envs:
    - a=b
# 是否监听 ‘vendor’ 文件夹下的文件改变
vendor_watch: false
# 不需要监听的目录名字
excluded_paths:
    - path
# main 包路径，也可以是单个文件，多个文件使用逗号分隔
build_pkg: ""
# build tags
build_tags: ""

# 是否禁止自动运行
disable_run: false

$ go get github.com/codegangsta/gin
# Then verify that gin was installed correctly:
$ gin -h

$ gin run main.go

 --laddr value, -l value       listening address for the proxy server
   --port value, -p value        port for the proxy server (default: 3000)
   --appPort value, -a value     port for the Go web server (default: 3001)
   --bin value, -b value         name of generated binary file (default: "gin-bin")
   --path value, -t value        Path to watch files from (default: ".")
   --build value, -d value       Path to build files from (defaults to same value as --path)
   --excludeDir value, -x value  Relative directories to exclude
   --immediate, -i               run the server immediately after it's built
   --all                         reloads whenever any file changes, as opposed to reloading only on .go file change
   --godep, -g                   use godep when building
   --buildArgs value             Additional go build arguments
   --certFile value              TLS Certificate
   --keyFile value               TLS Certificate Key
   --logPrefix value             Setup custom log prefix
   --notifications               enable desktop notifications
   --help, -h                    show help
   --version, -v                 print the version

$ go get github.com/oxequa/realize

$  GO111MODULE=off go get github.com/oxequa/realize

# 首先进行初始化 默认配置即可
$ realize init
# 执行项目
$ realize start
# 添加命令
$ realize add
# 删除命令
$ realize init

--name="name"               -> Run by name on existing configuration
--path="realize/server"     -> Custom Path (if not specified takes the working directory name)
--generate                  -> Enable go generate
--fmt                       -> Enable go fmt
--test                      -> Enable go test
--vet                       -> Enable go vet
--install                   -> Enable go install
--build                     -> Enable go build
--run                       -> Enable go run
--server                    -> Enable the web server
--open                      -> Open web ui in default browser
--no-config                 -> Ignore an existing config / skip the creation of a new one

$ realize start
$ realize start --path="mypath"
$ realize start --name="realize" --build
$ realize start --path="realize" --run --no-config
$ realize start --install --test --fmt --no-config
$ realize start --path="/Users/username/go/src/github.com/oxequa/realize-examples/coin/"