PostgreSQL启动恢复读取checkpoint记录失败的条件

1、首先读取ControlFile->checkPoint指向的checkpoint 2、如果读取失败，slave直接abort退出，master再次读取ControlFile->prevCheckPoint指向的checkpoint StartupXLOG->     |--checkPointLoc = ControlFile->checkPoint;     |--record = ReadCheckpointRecord(xlogreader, checkPointLoc, 1, true):     |-- if (record != NULL){           ...         }else if (StandbyMode){             ereport(PANIC,(errmsg("could not locate a valid checkpoint record")));         }else{             checkPointLoc = ControlFile->prevCheckPoint;             record = ReadCheckpointRecord(xlogreader, checkPointLoc, 2, true);             if (record != NULL){                 InRecovery = true;//标记下面进入recovery             }else{                 ereport(PANIC,(errmsg("could not locate a valid checkpoint record")));             }         }

一、那么什么条件下读取的checkpoint记录record==NULL?

1、ControlFile->checkPoint % XLOG_BLCKSZ < SizeOfXLogShortPHD 2、ReadRecord(xlogreader, ControlFile->checkPoint, LOG, true)返回NULL 3、ReadRecord读到的record!=NULL && record->xl_rmid != RM_XLOG_ID 4、ReadRecord读到的record!=NULL && info != XLOG_CHECKPOINT_SHUTDOWN && info != XLOG_CHECKPOINT_ONLINE 5、ReadRecord读到的record!=NULL && record->xl_tot_len != SizeOfXLogRecord + SizeOfXLogRecordDataHeaderShort + sizeof(CheckPoint)

二、ReadRecord函数返回NULL的条件

ReadRecord(xlogreader, ControlFile->checkPoint, LOG, true)     |--record = XLogReadRecord(xlogreader, ControlFile->checkPoint, &errormsg);     |-- 2.1 record==NULL && ！StandbyMode     |-- 2.2 record!=NULL && !tliInHistory(xlogreader->latestPageTLI, expectedTLEs)     /*-----     note:只要读取了一页xlog,就会赋值为该页第一个记录的时间线     XLogReaderValidatePageHeader         -->xlogreader->latestPageTLI=hdr->xlp_tli;     ------*/

三、XlogReadRecord读取checkpoint返回NULL的条件？

XLogReadRecord(xlogreader, ControlFile->checkPoint, &errormsg)     targetPagePtr = ControlFile->checkPoint - (ControlFile->checkPoint % XLOG_BLCKSZ);     targetRecOff = ControlFile->checkPoint % XLOG_BLCKSZ;     readOff = ReadPageInternal(state,targetPagePtr, Min(targetRecOff + SizeOfXLogRecord, XLOG_BLCKSZ));     pageHeaderSize = XLogPageHeaderSize((XLogPageHeader) state->readBuf);     record = (XLogRecord *) (state->readBuf + RecPtr % XLOG_BLCKSZ);     total_len = record->xl_tot_len;     -------------     1、readOff < 0     2、0< targetRecOff < pageHeaderSize     3、(((XLogPageHeader) state->readBuf)->xlp_info & XLP_FIRST_IS_CONTRECORD) && targetRecOff == pageHeaderSize       page头有跨页的record并且checkpoint定位的偏移正好在页头尾部     4、targetRecOff <= XLOG_BLCKSZ - SizeOfXLogRecord &&       !ValidXLogRecordHeader(state, ControlFile->checkPoint, state->ReadRecPtr, record,randAccess)       ---（record->xl_tot_len < SizeOfXLogRecord || record->xl_rmid > RM_MAX_ID || record->xl_prev != state->ReadRecPtr）     5、targetRecOff > XLOG_BLCKSZ - SizeOfXLogRecord && total_len < SizeOfXLogRecord     6、total_len > state->readRecordBufSize && !allocate_recordbuf(state, total_len)       一旦该记录损坏，total_len的长度非常大的话，就需要allocate_recordbuf扩展state->readbuf，可能因此分配失败abort       记录的checksum需要等待全部读取完整记录后才校验     -------------

三、ReadPageInternal返回的readOff返回小于0的条件

ReadPageInternal(state,targetPagePtr, Min(targetRecOff + SizeOfXLogRecord, XLOG_BLCKSZ))     1、第一次read wal文件，readLen = state->read_page：读取第一页。readLen < 0     2、readLen>0 && !XLogReaderValidatePageHeader(state, targetSegmentPtr, state->readBuf)     --     3、读取checkpoint所在页readLen = state->read_page: readLen < 0     4、readLen > 0 && readLen <= SizeOfXLogShortPHD     5、!XLogReaderValidatePageHeader(state, pageptr, (char *) hdr)

四、XLogPageRead何时返回值<0 ?

/*     1、WaitForWALToBecomeAvailable open失败     2、lseek 失败 && ！StandbyMode     3、read失败 && ！StandbyMode     4、校验page头失败 && ！StandbyMode     如果是StandbyMode，则会重新retry->WaitForWALToBecomeAvailable,切换日志源进行open     */     !WaitForWALToBecomeAvailable(targetPagePtr + reqLen,private->randAccess,1,targetRecPtr)//open     |-- return -1     readOff = targetPageOff;     if (lseek(readFile, (off_t) readOff, SEEK_SET) < 0){         ！StandbyMode:: return -1     }     if (read(readFile, readBuf, XLOG_BLCKSZ) != XLOG_BLCKSZ){         ！StandbyMode:: return -1     }     XLogReaderValidatePageHeader(xlogreader, targetPagePtr, readBuf)     ！StandbyMode:: return -1

五、WaitForWALToBecomeAvailable何时返回false？

--XLOG_FROM_ARCHIVE | XLOG_FROM_PG_WAL     1、先XLogFileReadAnyTLI open日志：         1、遍历时间线列表里的每一个时间线，从最新的开始         2、当读取checkpoint的时候，source是XLOG_FROM_ANY         3、先找归档的日志进行open；如果open失败再找WAL日志进行open         4、如果都没有open成功，则向前找时间线，open前一个时间线segno和文件号相同的文件进行open         5、open成功后expectedTLEs被赋值为当前时间线列表的所有值     2、如果open失败，则切换日志源：XLOG_FROM_ARCHIVE | XLOG_FROM_PG_WAL -> XLOG_FROM_STREAM     3、切换日志源后，XLOG_FROM_ARCHIVE | XLOG_FROM_PG_WAL 则：       slave && promote ：return false       !StandbyMode：return false     --XLOG_FROM_STREAM     1、!WalRcvStreaming()即receiver进程挂了，切换日志源     2、CheckForStandbyTrigger()切换日志源     3、XLOG_FROM_STREAM->XLOG_FROM_ARCHIVE