STM32看门狗配置说明
大家好，又见面了，我是你们的朋友全栈君。
系统时钟：
在这里插入图片描述
The WWDG clock is prescaled from the APB clock and has a configurable time-window that can be programmed to detect abnormally late or early application behavior.
/** @defgroup WWDG_Prescaler WWDG Prescaler * @{ */
#define WWDG_PRESCALER_1 0x00000000u /*!< WWDG counter clock = (PCLK1/4096)/1 */
#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB_0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB_1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
#define WWDG_PRESCALER_8 (WWDG_CFR_WDGTB_1 | WWDG_CFR_WDGTB_0) /*!< WWDG counter clock = (PCLK1/4096)/8 */寄存器配置
hwwdg.Instance = WWDG;
hwwdg.Init.Prescaler = WWDG_PRESCALER_1;
hwwdg.Init.Window = 240;
hwwdg.Init.Counter = 240;
hwwdg.Init.EWIMode = WWDG_EWI_DISABLE;
if (HAL_WWDG_Init(&hwwdg) != HAL_OK)
{
Error_Handler();
}理论计算时间（1分频） T = 240 ∗ 4096 8000000 ∗ 1000 = 122.88 m s T = \frac{240*4096}{8000000} *1000= 122.88ms T=8000000240∗4096∗1000=122.88ms
2分频时间为： 2*122.88 = 245.76ms
喂狗：
/** * @brief Refresh the WWDG. * @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains * the configuration information for the specified WWDG module. * @retval HAL status */
HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg)
{
/* Write to WWDG CR the WWDG Counter value to refresh with */
WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter));
/* Return function status */
return HAL_OK;
}发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/135639.html原文链接：https://javaforall.cn
本文参与 腾讯云自媒体同步曝光计划，分享自作者个人站点/博客。
原始发表：2022年5月3，如有侵权请联系 cloudcommunity@tencent.com 删除
评论
登录后参与评论
推荐阅读