ubuntu远程桌面控制_ubuntu 远程控制

全栈程序员站长

发布于 2022-09-24 13:39:31

2.3K0

发布于 2022-09-24 13:39:31

大家好，又见面了，我是你们的朋友全栈君。

已经使用的，备份

Section "Monitor"
  Identifier "Monitor0"
  HorizSync 28.0-80.0
  VertRefresh 48.0-75.0
  # https://arachnoid.com/modelines/
  # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
  Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
EndSection
Section "Device"
  Identifier "Card0"
  Driver "dummy"
  VideoRam 256000
EndSection
Section "Screen"
  DefaultDepth 24
  Identifier "Screen0"
  Device "Card0"
  Monitor "Monitor0"
  SubSection "Display"
    Depth 24
    Modes "1920x1080_60.00"
  EndSubSection
EndSection

安装软件和支持 安装使 Ubuntu 使用虚拟显示器的软件：

$ sudo apt-get install  xserver-xorg-core-hwe-18.04
$ sudo apt-get install  xserver-xorg-video-dummy-hwe-18.04  --fix-missing

修改/创建 xorg.conf

#/usr/share/X11/xorg.conf.d/xorg.conf
Section "Monitor"
  Identifier "Monitor0"
  HorizSync 28.0-80.0
  VertRefresh 48.0-75.0
  # https://arachnoid.com/modelines/
  # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
  Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
EndSection
Section "Device"
  Identifier "Card0"
  Driver "dummy"
  VideoRam 256000
EndSection
Section "Screen"
  DefaultDepth 24
  Identifier "Screen0"
  Device "Card0"
  Monitor "Monitor0"
  SubSection "Display"
    Depth 24
    Modes "1920x1080_60.00"
  EndSubSection
EndSection

参考:

1、How to run X server using xserver-xorg-video-dummy driver on Ubuntu

2、【LINUX】（Ubuntu）无显示器接入，使用虚拟显示器且远程控制

发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/171802.html原文链接：https://javaforall.cn

本文参与腾讯云自媒体同步曝光计划，分享自作者个人站点/博客。

如有侵权请联系 cloudcommunity@tencent.com 删除

ubuntu