gzip解压_银河麒麟gzip解压

大家好，又见面了，我是你们的朋友全栈君。

1、首先说为什么采用zlib解压，因为zlib可以解压内存数据。

2、下载zlib库后，自己在projcts目录里面根据需要编译lib库

3、静态链接只需要zlib.h ;zconf.h;zlib.lib三个文件即可(动态的不介绍了)

4、解压函数：

[html] view plain copy print ?

1. /* HTTP gzip decompress */
2. int httpgzdecompress(Byte *zdata, uLong nzdata,
3. Byte *data, uLong *ndata)
4. {
5. int err = 0;
6. z_stream d_stream = { 0 }; /* decompression stream */
7. static char dummy_head[2] =
8. {
9. 0x8 + 0x7 * 0x10,
10. (((0x8 + 0x7 * 0x10) * 0x100 + 30) / 31 * 31) & 0xFF,
11. };
12. d_stream.zalloc = (alloc_func)0;
13. d_stream.zfree = (free_func)0;
14. d_stream.opaque = (voidpf)0;
15. d_stream.next_in = zdata;
16. d_stream.avail_in = 0;
17. d_stream.next_out = data;
18. //if (inflateInit2(&d_stream, -MAX_WBITS) != Z_OK) return -1;
19. if (inflateInit2(&d_stream, 47) != Z_OK) return -1;
20. while (d_stream.total_out < *ndata && d_stream.total_in < nzdata) {
21. d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
22. if ((err = inflate(&d_stream, Z_NO_FLUSH)) == Z_STREAM_END) break;
23. if (err != Z_OK)
24. {
25. if (err == Z_DATA_ERROR)
26. {
27. d_stream.next_in = (Bytef*)dummy_head;
28. d_stream.avail_in = sizeof(dummy_head);
29. if ((err = inflate(&d_stream, Z_NO_FLUSH)) != Z_OK)
30. {
31. return -1;
32. }
33. }
34. else return -1;
35. }
36. }
37. if (inflateEnd(&d_stream) != Z_OK) return -1;
38. *ndata = d_stream.total_out;
39. return 0;
40. }

/* HTTP gzip decompress */
int httpgzdecompress(Byte *zdata, uLong nzdata,
	Byte *data, uLong *ndata)
{
	int err = 0;
	z_stream d_stream = { 0 }; /* decompression stream */
	static char dummy_head[2] =
	{
		0x8 + 0x7 * 0x10,
		(((0x8 + 0x7 * 0x10) * 0x100 + 30) / 31 * 31) & 0xFF,
	};
	d_stream.zalloc = (alloc_func)0;
	d_stream.zfree = (free_func)0;
	d_stream.opaque = (voidpf)0;
	d_stream.next_in = zdata;
	d_stream.avail_in = 0;
	d_stream.next_out = data;
	//if (inflateInit2(&d_stream, -MAX_WBITS) != Z_OK) return -1;
	if (inflateInit2(&d_stream, 47) != Z_OK) return -1;
	while (d_stream.total_out < *ndata && d_stream.total_in < nzdata) {
		d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
		if ((err = inflate(&d_stream, Z_NO_FLUSH)) == Z_STREAM_END) break;
		if (err != Z_OK)
		{
			if (err == Z_DATA_ERROR)
			{
				d_stream.next_in = (Bytef*)dummy_head;
				d_stream.avail_in = sizeof(dummy_head);
				if ((err = inflate(&d_stream, Z_NO_FLUSH)) != Z_OK)
				{
					return -1;
				}
			}
			else return -1;
		}
	}
	if (inflateEnd(&d_stream) != Z_OK) return -1;
	*ndata = d_stream.total_out;
	return 0;
}

直接调用就OK了 注意传入的buffer数据和长度都要赋值

eg：

char* pDest = new char[1024 * 16]; uLong ulLength = 1024*16; gzdecompress((Byte*)precvBuff, nCount, (Byte*)pDest, &ulLength);

版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。

发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/196279.html原文链接：https://javaforall.cn