Lvm管理

NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
vda    253:0    0  100G  0 disk
└─vda1 253:1    0  100G  0 part /
vdb    253:16   0  200G  0 disk
vdc    253:32   0  200G  0 disk

yum install -y lvm2

fdisk -l

Disk /dev/sdb: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000cd8ec

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048    41943039    20970496   83  Linux

Disk /dev/sdc: 536.9 GB, 536870912000 bytes, 1048576000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

fdisk /dev/vdb

Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xe80f8142.

Command (m for help): n
Partition type:
  p   primary (0 primary, 0 extended, 4 free)
  e   extended
Select (default p): p
Partition number (1-4, default 1): 1
First sector (2048-1048575999, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-1048575999, default 1048575999): 
Using default value 1048575999
Partition 1 of type Linux and of size 500 GiB is set

Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

parted /dev/sdb
mklabel gpt
unit TB # 设置单位为TB
mkpart primary 0 3  设置3TB的分区
mkpart primary 0 1396MB 
mkpart primary 0 -1
toggle 1 lvm  # 打上lvm标签

# 新建物理卷
pvcreate /dev/vdb /dev/vdc
  Physical volume "/dev/vdb" successfully created.
  Physical volume "/dev/vdc" successfully created.
# 扩容物理卷
pvresize /dev/vdb
Physical volume "/dev/vdb" changed
  1 physical volume(s) resized or updated / 0 physical volume(s) not resized

lvmdiskscan
  /dev/vda1 [    <100.00 GiB]
  /dev/vdb  [     200.00 GiB] LVM physical volume
  /dev/vdc  [     200.00 GiB] LVM physical volume
  0 disks
  1 partition
  2 LVM physical volume whole disks
  0 LVM physical volumes

vgcreate mongo_rs /dev/vdb /dev/vdc
  Volume group "mongo_rs" successfully created

vgs
VG       #PV #LV #SN Attr   VSize   VFree
  mongo_rs   2   0   0 wz--n- 399.99g 399.99g

# 创建lv
lvcreate -L 350g -n mongo_rs_lv mongo_rs
Logical volume "mongo_rs_lv" created
# 扩容lv
lvextend -L +21.99G /dev/lvm_test/lvm_test_lv
  Rounding size to boundary between physical extents: 21.99 GiB.
  Size of logical volume lvm_test/lvm_test_lv changed from 18.00 GiB (4608 extents) to 39.99 GiB (10238 extents).
  Logical volume lvm_test/lvm_test_lv successfully resized. 

lvdisplay

  --- Logical volume ---
  LV Path                /dev/mongo_rs/mongo_rs_lv
  LV Name                mongo_rs_lv
  VG Name                mongo_rs
  LV UUID                4VLpZ3-YTkN-cq65-nE03-O4GB-W4wK-eYLq0N
  LV Write Access        read/write
  LV Creation host, time mongdb-01, 2022-01-20 14:57:28 +0800
  LV Status              available
  # open                 0
  LV Size                350.00 GiB
  Current LE             89600
  Segments               2
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           252:0

# 格式化文件系统
mkfs.ext4 /dev/mongo_rs/mongo_rs_lv

mke2fs 1.42.9 (28-Dec-2013)
文件系统标签=
OS type: Linux
块大小=4096 (log=2)
分块大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
22937600 inodes, 91750400 blocks
4587520 blocks (5.00%) reserved for the super user
第一个数据块=0
Maximum filesystem blocks=2239758336
2800 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
	32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
	4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968

Allocating group tables: 完成
正在写入inode表: 完成
Creating journal (32768 blocks): 完成
Writing superblocks and filesystem accounting information: 完成

# 更新文件系统
## ext4
resize2fs /dev/lvm_test/lvm_test_lv
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/lvm_test/lvm_test_lv is mounted on /data; on-line resizing required
old_desc_blocks = 3, new_desc_blocks = 5
The filesystem on /dev/lvm_test/lvm_test_lv is now 10483712 blocks long.
## xfs
xfs_growfs /dev/lvm_test/lvm_test_lv

mkdir /data

mount /dev/mongo_rs/mongo_rs_lv /data

df -TPh

文件系统                         类型      容量  已用  可用 已用% 挂载点
/dev/vda1                        ext4       99G  1.9G   93G    2% /
devtmpfs                         devtmpfs  7.5G     0  7.5G    0% /dev
tmpfs                            tmpfs     7.6G     0  7.6G    0% /dev/shm
tmpfs                            tmpfs     7.6G  544K  7.6G    1% /run
tmpfs                            tmpfs     7.6G     0  7.6G    0% /sys/fs/cgroup
tmpfs                            tmpfs     1.6G     0  1.6G    0% /run/user/0
/dev/mapper/mongo_rs-mongo_rs_lv ext4      345G   69M  327G    1% /data

blkid
/dev/vda1: UUID="1114fe9e-2309-4580-b183-d778e6d97397" TYPE="ext4"
/dev/vdb: UUID="ev6YG0-PurR-p4hP-1mNM-ZDpr-36eE-zndFzA" TYPE="LVM2_member"
/dev/mapper/mongo_rs-mongo_rs_lv: UUID="0d567c75-6fbc-41e0-98ef-df78bcd74433" TYPE="ext4"
/dev/vdc: UUID="UjWQY7-oSHb-pcmS-wc39-M9uI-Zbqd-YEITMf" TYPE="LVM2_member"

vim /etc/fstab
UUID=0d567c75-6fbc-41e0-98ef-df78bcd74433 /data ext4 defaults 0 0

pvresize /dev/vdb

lvextend -L +50G /dev/mongo_rs/mongo_rs_lv

resize2fs /dev/mongo_rs/mongo_rs_lv 

xfs_growfs /dev/mongo_rs/mongo_rs_lv 

df -TPH

pvcreate /dev/vdf

vgextend  mongo_rs /dev/vdf

lvextend -L +50G /dev/mongo_rs/mongo_rs_lv

resize2fs /dev/mongo_rs/mongo_rs_lv 

xfs_growfs /dev/mongo_rs/mongo_rs_lv 

df -TPH

# 查看挂载
mount
# 卸载lv
umount /dev/centos-home
e2fsck -f /dev/centos-home
# 缩减逻辑边界
resize2fs /dev/centos-home  5G
# 缩减物理边界
lvchange  -a n /dev/centos-home
lvreduce -L 5G /dev/centos-home
lvchange  -a y /dev/centos-home
e2fsck  -f /dev/centos-home
# 挂载
mount /dev/centos-home /home