查看本机ip地址用什么命令linux_Linux查看服务器ip

1)ifconfig命令

输出如下：

[root@topgun /home/cly]

# ifconfig

eth0: flags=4163 mtu 1500

inet 192.168.128.132 netmask 255.255.255.0 broadcast 192.168.128.255

inet6 fe80::20c:29ff:fe45:63ba prefixlen 64 scopeid 0x20

ether 00:0c:29:45:63:ba txqueuelen 1000 (Ethernet)

RX packets 1936 bytes 2440516 (2.3 MiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 1207 bytes 94802 (92.5 KiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

device interrupt 19 base 0x2024

lo: flags=73 mtu 16436

inet 127.0.0.1 netmask 255.0.0.0

inet6 ::1 prefixlen 128 scopeid 0x10

loop txqueuelen 0 (Local Loopback)

RX packets 12 bytes 744 (744.0 B)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 12 bytes 744 (744.0 B)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

该命令属于包：

[root@topgun /home/cly]

# pacman -Qo ifconfig

/sbin/ifconfig 属于 net-tools 1.60.20120804git-2

2)ip address命令

输出如下：

[root@topgun /home/cly]

# ip address

1: lo: mtu 16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether 00:0c:29:45:63:ba brd ff:ff:ff:ff:ff:ff

inet 192.168.128.132/24 brd 192.168.128.255 scope global eth0

inet6 fe80::20c:29ff:fe45:63ba/64 scope link

valid_lft forever preferred_lft forever

该命令属于包：

[root@topgun /home/cly]

# pacman -Qo ip

/usr/sbin/ip 属于 iproute2 3.5.1-1

版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。

发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/230766.html原文链接：https://javaforall.cn