11.11密码(不要当🤡哦)

clear;clc;
n=200
x=linspace(-1.5,1.5,n);
y=linspace(-1.5,1.5,n);
z=linspace(-1.5,1.5,n);
[X,Y,Z]=meshgrid(x,y,z);
%笛卡尔心形线公式
F=((-(X.^2).*(Z.^3)-(9/80).*(Y.^2).*(Z.^3))+0.5.*((X.^2)+(Y.^2)+(Z.^2)-1).^3);
isosurface(F,0)
camlight right;
lighting phong
colormap('autumn');
caxis([0,25])
grid on
axis equal
title('')
view(-40,15);

%% 画花瓣的函数
 function y=Petal(x)
 %% 花瓣函数，绘制花瓣
 [m n]=size(x);%创建大小为x的行向量
 for i=1:m%控制循环几次函数    
     for j=1:n%控制进行几次判断        
         if rem(x(i,j),2*pi)>=0&&rem(x(i,j),2*pi)<0.5*pi%控制进行那个表达式            
             y(i,j)=sin(2*x(i,j)-0.5*pi)+1;        
         elseif rem(x(i,j),2*pi)>=0.5*pi&&rem(x(i,j),2*pi)<1.5*pi            
             y(i,j)=2;        
         elseif rem(x(i,j),2*pi)>=1.5*pi&&rem(x(i,j),2*pi)<2*pi
             y(i,j)=-cos(2*x(i,j))+1;
         end
    end
 end 

%% 主函数
clear;clc;
t=0:0.001*pi:2*pi;% 控制玫瑰花瓣网格，步长越小，越光滑
for i=1:5%设置另一个变量    
    r(i,:)=i-0.9:0.1:i+0.1;
end%绘制花瓣
for i=1:5%控制花瓣层数    
    a=r(i,:);    
    b=t;    
    [a,b]=meshgrid(a,b);%将变量一一对应    
    z=(log(a)+5).*Petal(5*b+pi*i).*abs(sin(pi*a));%图形的公式    
    [x,y,z]=pol2cart(b,a,z);%将变量一一对应    
    C(:,:,1) = ones(size(z)); % red    
    C(:,:,2) = zeros(size(z)); % green    
    C(:,:,3) = zeros(size(z)); % blue 根据三原色控制红色最大    
    mesh(x,y,z,C)%surf的第四个变量控制颜色    
    hold on
end%% 绘制花托
[xx,yy]=meshgrid(-5:0.1:5);
h=2*cos((xx.^2+yy.^2).^0.5)-0.64;%图形公式
%% 根据三原色将绿色设为最大
CO(:,:,1) = zeros(size(h));
CO(:,:,2) = ones(size(h)); 
CO(:,:,3) = zeros(size(h));    
mesh(xx,yy,h,CO);%surf的第四个变量控制颜色
hold on%继续绘图
camlight right;%可以设置光源位置
lighting phong%设置光照view(-50,45);%设置观看角度
set(gcf,'color','[1 1 1]')%将背景设置为白色
hold off%不再继续绘图
axis off%隐藏坐标轴 

import random
from math import sin, cos, pi, log
from tkinter import *

CANVAS_WIDTH = 640  # 宽
CANVAS_HEIGHT = 480  # 高
CANVAS_CENTER_X = CANVAS_WIDTH / 2
CANVAS_CENTER_Y = CANVAS_HEIGHT / 2
IMAGE_ENLARGE = 11  # 放大比例
HEART_COLOR = "#FF69B4"


def heart_function(t, shrink_ratio: float = IMAGE_ENLARGE):
    """
    “爱心函数生成器”
    :param shrink_ratio: 放大比例
    :param t: 参数
    :return: 坐标
    """
    # 基础函数
    x = 16 * (sin(t) ** 3)
    y = -(13 * cos(t) - 5 * cos(2 * t) - 2 * cos(3 * t) - cos(4 * t))
    # 放大
    x *= shrink_ratio
    y *= shrink_ratio
    # 移到画布中央
    x += CANVAS_CENTER_X
    y += CANVAS_CENTER_Y
    return int(x), int(y)


def scatter_inside(x, y, beta=0.15):
    """
    随机内部扩散
    :param x: 原x
    :param y: 原y
    :param beta: 强度
    :return: 新坐标
    """
    ratio_x = - beta * log(random.random())
    ratio_y = - beta * log(random.random())
    dx = ratio_x * (x - CANVAS_CENTER_X)
    dy = ratio_y * (y - CANVAS_CENTER_Y)
    return x - dx, y - dy


def shrink(x, y, ratio):
    """
    抖动
    :param x: 原x
    :param y: 原y
    :param ratio: 比例
    :return: 新坐标
    """
    force = -1 / (((x - CANVAS_CENTER_X) ** 2 + (y - CANVAS_CENTER_Y) ** 2) ** 0.6)
    dx = ratio * force * (x - CANVAS_CENTER_X)
    dy = ratio * force * (y - CANVAS_CENTER_Y)
    return x - dx, y - dy


def curve(p):
    """
    自定义曲线函数，调整跳动周期
    :param p: 参数
    :return: 正弦
    """
    return 2 * (2 * sin(4 * p)) / (2 * pi)


class Heart:
    """
    爱心类
    """
    def __init__(self, generate_frame=20):
        self._points = set()  # 原始爱心坐标集合
        self._edge_diffusion_points = set()  # 边缘扩散效果点坐标集合
        self._center_diffusion_points = set()  # 中心扩散效果点坐标集合
        self.all_points = {}  # 每帧动态点坐标
        self.build(2000)
        self.random_halo = 1000
        self.generate_frame = generate_frame
        for frame in range(generate_frame):
            self.calc(frame)

    def build(self, number):
        # 爱心
        for _ in range(number):
            t = random.uniform(0, 2 * pi)  # 随机不到的地方造成爱心有缺口
            x, y = heart_function(t)
            self._points.add((x, y))

        # 爱心内扩散
        for _x, _y in list(self._points):
            for _ in range(3):
                x, y = scatter_inside(_x, _y, 0.05)
                self._edge_diffusion_points.add((x, y))
        # 爱心内再次扩散
        point_list = list(self._points)
        for _ in range(4000):
            x, y = random.choice(point_list)
            x, y = scatter_inside(x, y, 0.17)
            self._center_diffusion_points.add((x, y))

    @staticmethod
    def calc_position(x, y, ratio):
        # 调整缩放比例
        force = 1 / (((x - CANVAS_CENTER_X) ** 2 + (y - CANVAS_CENTER_Y) ** 2) ** 0.520)  # 魔法参数
        dx = ratio * force * (x - CANVAS_CENTER_X) + random.randint(-1, 1)
        dy = ratio * force * (y - CANVAS_CENTER_Y) + random.randint(-1, 1)
        return x - dx, y - dy

    def calc(self, generate_frame):
        ratio = 10 * curve(generate_frame / 10 * pi)  # 圆滑的周期的缩放比例
        halo_radius = int(4 + 6 * (1 + curve(generate_frame / 10 * pi)))
        halo_number = int(3000 + 4000 * abs(curve(generate_frame / 10 * pi) ** 2))
        all_points = []
        # 光环
        heart_halo_point = set()  # 光环的点坐标集合
        for _ in range(halo_number):
            t = random.uniform(0, 2 * pi)  # 随机不到的地方造成爱心有缺口
            x, y = heart_function(t, shrink_ratio=11.6)  # 魔法参数
            x, y = shrink(x, y, halo_radius)
            if (x, y) not in heart_halo_point:
                # 处理新的点
                heart_halo_point.add((x, y))
                x += random.randint(-14, 14)
                y += random.randint(-14, 14)
                size = random.choice((1, 2, 2))
                all_points.append((x, y, size))
        # 轮廓
        for x, y in self._points:
            x, y = self.calc_position(x, y, ratio)
            size = random.randint(1, 3)
            all_points.append((x, y, size))
        # 内容
        for x, y in self._edge_diffusion_points:
            x, y = self.calc_position(x, y, ratio)
            size = random.randint(1, 2)
            all_points.append((x, y, size))

        for x, y in self._center_diffusion_points:
            x, y = self.calc_position(x, y, ratio)
            size = random.randint(1, 2)
            all_points.append((x, y, size))
        self.all_points[generate_frame] = all_points

    def render(self, render_canvas, render_frame):
        for x, y, size in self.all_points[render_frame % self.generate_frame]:
            render_canvas.create_rectangle(x, y, x + size, y + size, width=0, fill=HEART_COLOR)


def draw(main: Tk, render_canvas: Canvas, render_heart: Heart, render_frame=0):
    render_canvas.delete('all')
    render_heart.render(render_canvas, render_frame)
    main.after(16, draw, main, render_canvas, render_heart, render_frame + 1)


if __name__ == '__main__':
    root = Tk()  # 一个Tk
    canvas = Canvas(root, bg='black', height=CANVAS_HEIGHT, width=CANVAS_WIDTH)
    canvas.pack()
    heart = Heart()  # 心
    draw(root, canvas, heart)
    root.mainloop()