常用的shell运维脚本

#!/bin/bash
# 假设格式为: $remote_addr - $remote_user [$time_local] "$request" $status $body_bytes_sent "$http_referer" "$http_user_agent" "$http_x_forwarded_for"
LOG_FILE=$1
echo "统计访问最多的10个IP"
awk '{a[$1]++}END{print "UV:",length(a);for(v in a)print v,a[v]}' $LOG_FILE |sort -k2 -nr |head -10
echo "----------------------"

echo "统计时间段访问最多的IP"
awk '$4>="[01/Dec/2018:13:20:25" && $4<="[27/Nov/2018:16:20:49"{a[$1]++}END{for(v in a)print v,a[v]}' $LOG_FILE |sort -k2 -nr|head -10
echo "----------------------"

echo "统计访问最多的10个页面"
awk '{a[$7]++}END{print "PV:",length(a);for(v in a){if(a[v]>10)print v,a[v]}}' $LOG_FILE |sort -k2 -nr
echo "----------------------"

echo "统计访问页面状态码数量"
awk '{a[$7" "$9]++}END{for(v in a){if(a[v]>5)print v,a[v]}}'

#!/bin/bash
DATE=$(date +%d/%b/%Y:%H:%M)
LOG_FILE=/usr/local/nginx/logs/demo2.access.log
ABNORMAL_IP=$(tail -n5000 $LOG_FILE |grep $DATE |awk '{a[$1]++}END{for(i in a)if(a[i]>10)print i}')
for IP in $ABNORMAL_IP; do
    if [ $(iptables -vnL |grep -c "$IP") -eq 0 ]; then
        iptables -I INPUT -s $IP -j DROP
        echo "$(date +'%F_%T') $IP" >> /tmp/drop_ip.log
    fi
done

#!/bin/bash
NIC=$1
echo -e " In ------ Out"
while true; do
    OLD_IN=$(awk '$0~"'$NIC'"{print $2}' /proc/net/dev)
    OLD_OUT=$(awk '$0~"'$NIC'"{print $10}' /proc/net/dev)
    sleep 1
    NEW_IN=$(awk  '$0~"'$NIC'"{print $2}' /proc/net/dev)
    NEW_OUT=$(awk '$0~"'$NIC'"{print $10}' /proc/net/dev)
    IN=$(printf "%.1f%s" "$((($NEW_IN-$OLD_IN)/1024))" "KB/s")
    OUT=$(printf "%.1f%s" "$((($NEW_OUT-$OLD_OUT)/1024))" "KB/s")
    echo "$IN $OUT"
    sleep 1
done

#!/bin/bash
HOST_INFO=host.info
for IP in $(awk '/^[^#]/{print $1}' $HOST_INFO); do
    USER=$(awk -v ip=$IP 'ip==$1{print $2}' $HOST_INFO)
    PORT=$(awk -v ip=$IP 'ip==$1{print $3}' $HOST_INFO)
    TMP_FILE=/tmp/disk.tmp
    ssh -p $PORT $USER@$IP 'df -h' > $TMP_FILE
    USE_RATE_LIST=$(awk 'BEGIN{OFS="="}/^\/dev/{print $NF,int($5)}' $TMP_FILE)
    for USE_RATE in $USE_RATE_LIST; do
        PART_NAME=${USE_RATE%=*}
        USE_RATE=${USE_RATE#*=}
        if [ $USE_RATE -ge 80 ]; then
            echo "Warning: $PART_NAME Partition usage $USE_RATE%!"
        fi
    done
done

#/bin/bash
# 设置时区并同步时间
ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
if ! crontab -l |grep ntpdate &>/dev/null ; then
    (echo "* 1 * * * ntpdate time.windows.com >/dev/null 2>&1";crontab -l) |crontab
fi

# 禁用selinux
sed -i '/SELINUX/{s/permissive/disabled/}' /etc/selinux/config

# 关闭防火墙
if egrep "7.[0-9]" /etc/redhat-release &>/dev/null; then
    systemctl stop firewalld
    systemctl disable firewalld
elif egrep "6.[0-9]" /etc/redhat-release &>/dev/null; then
    service iptables stop
    chkconfig iptables off
fi

# 历史命令显示操作时间
if ! grep HISTTIMEFORMAT /etc/bashrc; then
    echo 'export HISTTIMEFORMAT="%F %T `whoami` "' >> /etc/bashrc
fi

# SSH超时时间
if ! grep "TMOUT=600" /etc/profile &>/dev/null; then
    echo "export TMOUT=600" >> /etc/profile
fi

# 禁止root远程登录
sed -i 's/#PermitRootLogin yes/PermitRootLogin no/' /etc/ssh/sshd_config

# 禁止定时任务向发送邮件
sed -i 's/^MAILTO=root/MAILTO=""/' /etc/crontab

# 设置最大打开文件数
if ! grep "* soft nofile 65535" /etc/security/limits.conf &>/dev/null; then
    cat >> /etc/security/limits.conf << EOF
    * soft nofile 65535
    * hard nofile 65535
EOF
fi

# 系统内核优化
cat >> /etc/sysctl.conf << EOF
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_tw_buckets = 20480
net.ipv4.tcp_max_syn_backlog = 20480
net.core.netdev_max_backlog = 262144
net.ipv4.tcp_fin_timeout = 20
EOF

# 减少SWAP使用
echo "0" > /proc/sys/vm/swappiness

# 安装系统性能分析工具及其他
yum install gcc make autoconf vim sysstat net-tools iostat if

# yum install mailx
# vi /etc/mail.rc
set from=test@exmaple.com smtp=smtp.example.com
set smtp-auth-user=test@example.com smtp-auth-password=*******
set smtp-auth=login