H3C交接机堆叠案例

H3C交接机堆叠案例

两台H3C交接机堆叠脚本：

场景：两台H3C交换机; 硬件型号相同，软件版本相机；

SW1的47口-SW2的48口互联；SW2的48口-SW1的47口互联

SW1 : Master 主交换机

SW2 ：Standby 备交换机

两成员的 priority 默认优先级为1，数值越大优先级越高。 ------------------------------------------------------------------

[SW2]

irf member 1 renumber 2

quit

save force

reboot

irf member 2 priority 20

interface Ten-GigabitEthernet2/0/47

shutdown

quit

interface Ten-GigabitEthernet2/0/48

shutdown

quit

irf-port 2/1

port group interface Ten-GigabitEthernet2/0/47

quit

irf-port 2/2

port group interface Ten-GigabitEthernet2/0/48

quit

interface Ten-GigabitEthernet2/0/47

undo shutdown

quit

interface Ten-GigabitEthernet2/0/48

undo shutdown

quit

irf-port-configuration active

save force

--------------------------------------------------------

[SW1]

irf member 1 priority 30

interface Ten-GigabitEthernet1/0/47

shut

quit

interface Ten-GigabitEthernet1/0/48

shut

quit

irf-port 1/1

port group interface Ten-GigabitEthernet1/0/47

irf-port 1/2

port group interface Ten-GigabitEthernet1/0/48

interface Ten-GigabitEthernet1/0/47

undo shut

interface Ten-GigabitEthernet1/0/48

undo shut

irf-port-configuration active

quit

save force

最后步骤：

连接光纤（主交换47口与备交换机48口互联， 主交换48与备交换机47互联）

验证命令：

display irf

display irf config

display device