blocks|key|336203|text|您是否在使用共享主机提供商？这可能是主设置覆盖了您试图更改的任何内容。你有没有试过把它们添加到你的.htaccess中？|type|unstyled|depth|inlineStyleRanges|entityRanges|data|336204|php_value+upload_max_filesize+10M
php_value+post_max_size+10M|code-block|syntax|javascript|336205|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Are you using a shared hosting provider? It could be master settings overriding anything you're trying to change. Have you tried adding those into your .htaccess?

<pre><code>php_value upload_max_filesize 10M
php_value post_max_size 10M
</code></pre>

blocks|key|337213|text|这也可以通过apache配置进行控制。检查httpd.conf和/或.htaccess中是否有类似以下内容：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|337214|php_value+upload_max_filesize+10M|code-block|syntax|javascript|337215|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This can also be controlled with the apache configuration. Check the httpd.conf and/or .htaccess for something like the following:

<pre><code>php_value upload_max_filesize 10M
</code></pre>

blocks|key|3315031|text|不能在PHP.ini之外使用shorthand+notation设置配置值。我假设当遇到一个不好的值时，它会回退到2MB作为编译后的默认值。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3315032|另一方面，我不认为可以使用ini_set()来设置upload_max_filesize。"official"+list声明它是PHP_INI_PERDIR。|style|CODE|3315033|entityMap|0|LINK|mutability|MUTABLE|url|http://www.php.net/manual/en/faq.using.php#faq.using.shorthandbytes|1|http://www.php.net/manual/en/ini.list.php^0|E|I|0|0|D|9|P|J|1S|E|19|F|1|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@$A|S|B|T|1|U]]|C|$]]|$1|D|3|E|5|6|7|V|8|@$A|W|B|X|F|G]|$A|Y|B|Z|F|G]|$A|10|B|11|F|G]]|9|@$A|12|B|13|1|14]]|C|$]]|$1|H|3|-4|5|6|7|15|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]|P|$5|K|L|M|C|$N|Q]]]]

You can't use <a href="http://www.php.net/manual/en/faq.using.php#faq.using.shorthandbytes" rel="noreferrer">shorthand notation</a> to set configuration values outside of PHP.ini. I assume it's falling back to 2MB as the compiled default when confronted with a bad value.

On the other hand, I don't think <code>upload_max_filesize</code> could be set using <code>ini_set()</code>. The <a href="http://www.php.net/manual/en/ini.list.php" rel="noreferrer">"official" list</a> states that it is <code>PHP_INI_PERDIR</code> .

blocks|key|339657|text|如果你在运行中使用ini_set，那么你会在这里找到http://php.net/manual/en/ini.core.php的信息，例如upload_max_filesize和post_max_size不能在运行中改变(PHP_INI_PERDIR)。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|339658|似乎只有php.ini、.htaccess或vhost配置更改才会更改这些变量。|339659|entityMap|0|LINK|mutability|MUTABLE|url|http://php.net/manual/en/ini.core.php^0|Q|11|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

if you use ini_set on the fly then you will find here <a href="http://php.net/manual/en/ini.core.php" rel="nofollow">http://php.net/manual/en/ini.core.php</a> the information that e.g. upload_max_filesize and post_max_size is not changeable on the fly (PHP_INI_PERDIR).

Only a php.ini, .htaccess or vhost config change seems to change these variables.

blocks|key|334734|text|如果您在本地服务器上运行，比如wamp或xampp，请确保它使用的是您认为的php.ini。这些服务器通常默认使用不在您的html+docs文件夹中的php.ini。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|334735|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If you are running in a local server, such as wamp or xampp, make sure it's using the php.ini you think it is. These servers usually default to a php.ini that's not in your html docs folder.

blocks|key|339674|text|您也可以在php文件中使用，如下所示|type|unstyled|depth|inlineStyleRanges|entityRanges|data|339675|<?php+ini_set('upload_max_filesize',+'200M');+?>|code-block|syntax|javascript|339676|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

You can use also in the php file like this

<pre><code>&lt;?php ini_set('upload_max_filesize', '200M'); ?&gt;
</code></pre>

blocks|key|3102288|text|我使用与加载我的应用程序的index.php脚本相同的目录中的.user.ini文件来实现这一点。内容如下：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3102289|upload_max_filesize+=+"20M"
post_max_size+=+"25M"|code-block|syntax|javascript|3102290|这是Heroku的推荐解决方案。|3102291|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I got this to work using a .user.ini file in the same directory as my index.php script that loads my app. Here are the contents:

<pre><code>upload_max_filesize = "20M"
post_max_size = "25M"
</code></pre>

This is the recommended solution for Heroku.

blocks|key|3315128|text|由于我刚刚在一个共享主机上遇到了这个问题，并且无法将这些值添加到我的.htaccess文件中，所以我想我应该分享我的解决方案。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3315129|我创建了一个包含值的ini文件。就这么简单：|3315130|创建一个名为".user.ini“的文件并添加您的值|3315131|upload_max_filesize+=+150M
post_max_size+=+150M|code-block|syntax|javascript|3315132|问题解决了。|3315133|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|Q|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|R|8|@]|9|@]|A|$I|J]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Since I just ran in to this problem on a shared host and was unable to add the values to my .htaccess file I thought I'd share my solution. 

I made an ini file with the values in it. Simple as that:

Make a file called ".user.ini" and add your values

<pre><code>upload_max_filesize = 150M
post_max_size = 150M
</code></pre>

Boom, problem solved.

blocks|key|3102328|text|我也遇到过同样的问题，但我发现并非所有的配置设置都可以使用ini_set()函数来设置，请查看此Where+a+configuration+setting+may+be+set|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3102329|entityMap|0|LINK|mutability|MUTABLE|url|http://php.net/manual/en/configuration.changes.modes.php^0|1C|14|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

I've faced the same problem , but I found out that not all the configuration settings could be set using ini_set() function , check this <a href="http://php.net/manual/en/configuration.changes.modes.php" rel="nofollow">Where a configuration setting may be set</a>

blocks|key|336290|text|仅当问题发生在WordPress安装上时，才能应用此解决方案！|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|336291|如果您没有FTP访问权限或懒于编辑文件，|336292|您可以使用Increase+Maximum+Upload+File+Size+plugin来增加上传文件的最大大小。|336293|entityMap|0|LINK|mutability|MUTABLE|url|https://wordpress.org/plugins/upload-max-file-size/^0|0|V|0|0|5|14|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@$9|S|A|T|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|U|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|V|8|@]|D|@$9|W|A|X|1|Y]]|E|$]]|$1|J|3|-4|5|6|7|Z|8|@]|D|@]|E|$]]]|K|$L|$5|M|N|O|E|$P|Q]]]]

This solution can be applied only if the issue is on a WordPress installation! 

If you don't have FTP access or too lazy to edit files,

You can use <a href="https://wordpress.org/plugins/upload-max-file-size/" rel="nofollow noreferrer">Increase Maximum Upload File Size plugin</a> to increase the maximum upload file size.

blocks|key|3102381|text|默认情况下，PHP允许在服务器上上传最大2MB的文件。但您可以根据自己的情况修改文件上传的最大大小。通过使用PHP配置文件php.ini，您可以在PHP中增加或减少文件上传大小。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3102382|首先在文本编辑器中打开php.ini文件。搜索upload_max_filesize变量并指定要增加的大小。|3102383|搜索post_max_size变量并指定要增加的大小。|3102384|post_max_size+=+128M|code-block|syntax|javascript|3102385|您可以从here查看此内容|offset|length|3102386|entityMap|0|LINK|mutability|MUTABLE|url|https://slumcoder.com/article/how-to-increase-max_upload_size-in-php^0|0|0|0|0|4|4|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|Y|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|Z|8|@]|9|@]|A|$I|J]]|$1|K|3|L|5|6|7|10|8|@]|9|@$M|11|N|12|1|13]]|A|$]]|$1|O|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|P|$Q|$5|R|S|T|A|$U|V]]]]

By default, PHP permits uploading maximum 2 MB file on the server. But you can modify the maximum size of file upload as per your condition. By using the PHP configuration file php.ini, you can increase or decrease the file upload size in PHP.
First open the php.ini file in your text editor.
Search the upload_max_filesize variable and stipulate the size which you want to increase.
Search for post_max_size variable and stipulate the size which you want to increase.
<pre><code>post_max_size = 128M
</code></pre>
you can check this from <a href="https://slumcoder.com/article/how-to-increase-max_upload_size-in-php" rel="nofollow noreferrer">here</a>

I'm using PHP 5.3.0 and have encountered something that might be a bug (in which case I'll report it) or might be me - so I'm asking to make sure.

When running this code:

<pre><code>&lt;?php
ini_set('upload_max_filesize', '10M');
echo ini_get('upload_max_filesize'), ", " , ini_get('post_max_size')
</code></pre>

I end up with:

<pre><code>2M, 8M
</code></pre>

This is despite my php.ini setting these higher:

<pre><code>upload_max_filesize = 10M
post_max_size = 10M
</code></pre>

(occuring only once)

Because the error occurs after setting the value as well as it being set in php.ini I'm inclined to think it's a bug. Can anyone confirm or point me where I'm going wrong?

Update: Looks like restarting Apache fixed this - I always thought it didn't need to be restarted if you changed php.ini.

Changing upload_max_filesize on PHP

服务器

WordPress

我正在使用PHP 5.3.0，并且遇到了一些可能是bug (在这种情况下，我会报告它)或可能是我自己的问题-所以我要求确认一下。运行此代码时：<?phpini_set('upload_max_filesize', '10M');echo ini_get('upload_max_filesize'), ", " , in...

问在PHP上更改upload_max_filesize
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在PHP上更改upload_max_filesizeEN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在PHP上更改upload_max_filesize
EN