blocks|key|1316318|text|在Windows/DOS批处理文件中：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1316319|pause|code-block|syntax|javascript|1316320|这将打印一条漂亮的"Press+any+key+to+continue+.+.+.+"消息|offset|length|style|CODE|1316321|或者，如果您不需要"Press+any+key+to+continue+.+.+."消息，请执行以下操作：|1316322|pause+>nul|1316323|entityMap^0|0|0|9|Y|0|9|X|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@$I|V|J|W|K|L]]|9|@]|A|$]]|$1|M|3|N|5|6|7|X|8|@$I|Y|J|Z|K|L]]|9|@]|A|$]]|$1|O|3|P|5|D|7|10|8|@]|9|@]|A|$E|F]]|$1|Q|3|-4|5|6|7|11|8|@]|9|@]|A|$]]]|R|$]]

In Windows/DOS batch files:

<pre><code>pause
</code></pre>

This prints a nice <code>"Press any key to continue . . . "</code> message

Or, if you don't want the <code>"Press any key to continue . . ."</code> message, do this instead:

<pre><code>pause &gt;nul
</code></pre>

blocks|key|1316472|text|以下将命令放入批处理文件的方法将打开新的命令提示符窗口，并且新窗口不会自动退出。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1316473|start+"title"+call+abcd.exe+param1+param2++
start+"title"+call+xyz.exe+param1+param2|code-block|syntax|javascript|1316474|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

The below way of having commands in a batch file will open new command prompt windows and the new windows will not exit automatically. 

<pre><code>start "title" call abcd.exe param1 param2 
start "title" call xyz.exe param1 param2
</code></pre>

blocks|key|1316404|text|在要执行的代码下面添加cmd.exe作为新行：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1316405|c:\Python27\python+D:\code\simple_http_server.py

cmd.exe|code-block|syntax|javascript|1316406|entityMap^0|B|7|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|P|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|L|$]]

Add <code>cmd.exe</code> as a new line below the code you want to execute:

<pre><code>c:\Python27\python D:\code\simple_http_server.py

cmd.exe
</code></pre>

blocks|key|1316576|text|我的方法是编写一个实际的批处理(即"foo.bat")来完成作业；然后创建另一个"start.bat"：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1316577|@echo+off
cmd+/k+foo.bat|code-block|syntax|javascript|1316578|当我设置一次性环境变量时，我发现这非常有用。|1316579|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

my way is to write an actual batch (saying "foo.bat") to finish the job; then create another "start.bat":

<pre><code>@echo off
cmd /k foo.bat
</code></pre>

I find this is extremely useful when I set up one-time environment variables.

blocks|key|1316370|text|在批处理文件的末尾调用cmd。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1316371|entityMap^0|B|3|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

Call <code>cmd</code> at the end of the batch file.

blocks|key|1316759|text|对这里的答案有问题，所以我想出了这个，这对我来说是有效的(TM)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1316760|cmd+/c+node_modules\.bin\tsc
cmd+/c+node+rollup_build.js
pause|code-block|syntax|javascript|1316761|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Had problems with the answers here, so I came up with this, which works for me (TM):

<pre><code>cmd /c node_modules\.bin\tsc
cmd /c node rollup_build.js
pause
</code></pre>

blocks|key|1316446|text|除了pause。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1316447|set+/p=|code-block|syntax|javascript|1316448|可以使用.It将期望用户输入，并在按下enter时释放流。|1316449|或|1316450|runas+/user:#+""+>nul+2>&1|1316451|其将执行相同的操作，除了来自用户输入的内容将不会被显示，也不会保留在命令历史中。|1316452|entityMap^0|2|5|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|X|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|Y|8|@]|D|@]|E|$]]|$1|M|3|N|5|6|7|Z|8|@]|D|@]|E|$]]|$1|O|3|P|5|H|7|10|8|@]|D|@]|E|$I|J]]|$1|Q|3|R|5|6|7|11|8|@]|D|@]|E|$]]|$1|S|3|-4|5|6|7|12|8|@]|D|@]|E|$]]]|T|$]]

besides <code>pause</code>.

<pre><code>set /p=
</code></pre>

can be used .It will expect user input and will release the flow when enter is pressed.

or

<pre><code>runas /user:# "" &gt;nul 2&gt;&amp;1
</code></pre>

which will do the same except nothing from the user input will be displayed nor will remain in the command history.

blocks|key|1531699|text|可能性1:只需创建2个.bat文件并写入第一个：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1531700|start+<filename>+//+name+of+2nd+batch+file
exit|code-block|syntax|javascript|1531701|批处理文件2是最终不会关闭的文件。所以现在当你打开批处理nr.1时，它会启动第二个并关闭它自己。当第二个结束时，它不会完全关闭(只要你不把出口放在最后)。|1531702|可能性2:批处理文件1：|1531703|call+<filename>
cls
echo+End+of+file
pause
<any+code+you+want>|1531704|当第二个文件结束时，它将再次进入文件1并输出其馀部分。有了它，你甚至可以制作错误处理程序。如果nr.1崩溃，它将进入nr.2并显示它|1531705|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|S|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|T|8|@]|9|@]|A|$]]|$1|K|3|L|5|D|7|U|8|@]|9|@]|A|$E|F]]|$1|M|3|N|5|6|7|V|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

Possibility 1:
Just make 2 .bat files and write into the first:

<pre><code>start &lt;filename&gt; // name of 2nd batch file
exit
</code></pre>

Batch file 2 is the file that wont close in the end.
So now when you open batch nr.1 It will start the 2nd and cloe itself.
When the 2nd finishes it will not close entirely (as long as you wont put exit at the end)

Possibility 2:
Batch file 1:

<pre><code>call &lt;filename&gt;
cls
echo End of file
pause
&lt;any code you want&gt;
</code></pre>

When the 2nd file ends then it will proceed to file 1 again and output the rest of it. With that you can even make error handlers. If nr.1 crashes it goes into nr.2 and displays it

blocks|key|1531827|text|我知道我迟到了，但我更喜欢的方式是：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1531828|:programend
pause>nul
GOTO+programend|code-block|syntax|javascript|1531829|这样，用户就不能使用enter退出。|1531830|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I know I'm late but my preferred way is:

<pre><code>:programend
pause&gt;nul
GOTO programend
</code></pre>

In this way the user cannot exit using enter.

blocks|key|1316710|text|pause|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|1316711|或|unstyled|1316712|echo+text+to+display
pause>nul|1316713|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$B|C]]|$1|D|3|E|5|F|7|L|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$B|C]]|$1|I|3|-4|5|F|7|N|8|@]|9|@]|A|$]]]|J|$]]

<pre><code>pause
</code></pre>

or

<pre><code>echo text to display
pause&gt;nul
</code></pre>

blocks|key|1531881|text|很简单，将cmd添加到bat的最后一行，但是！如果重置或清除系统路径，则必须使用完整路径启动cmd，例如：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1531882|%25windir%25\system32\cmd.exe|code-block|syntax|javascript|1531883|例如，我有一个bat文件将jdk重置为旧版本，如下所示：|1531884|PATH=C:\Program+Files\Java\jdk1.6.0_45\bin;C:\apache-ant-1.7.1\bin
SET+JAVA_HOME=C:\Program+Files\Java\jdk1.6.0_45
%25windir%25\system32\cmd.exe|1531885|因为我重置了系统路径，所以我必须使用完整路径运行cmd，否则系统无法找到cmd.exe，它将无法运行cmd，并且只需关闭窗口，您就看不到错误消息。|1531886|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

Easy, add cmd to your last line of bat, BUT! if you reset or clear your system path, you must start your cmd with the full path, like: 

<pre><code>%windir%\system32\cmd.exe
</code></pre>

For example, I have a bat file to reset jdk to old version like this:

<pre><code>PATH=C:\Program Files\Java\jdk1.6.0_45\bin;C:\apache-ant-1.7.1\bin
SET JAVA_HOME=C:\Program Files\Java\jdk1.6.0_45
%windir%\system32\cmd.exe
</code></pre>

since I reset the system path, I have to run cmd with the full path, or the system can't find cmd.exe, it will fail to run cmd, and just close the window, and you can't see the error msg.

What command can I put at the end of a batch file to prevent auto-closing of the console after the execution of the file?

How to prevent auto-closing of console after the execution of batch file

Windows

Java

在批处理文件的末尾添加什么命令可以防止文件执行后自动关闭控制台？

问如何防止执行批处理文件后自动关闭控制台
EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何防止执行批处理文件后自动关闭控制台EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何防止执行批处理文件后自动关闭控制台
EN