blocks|key|2524937|text|首先需要添加一个远程存储库:+git+remote+add+yourname+https://github.com/user/repo.git|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|2524938|然后推..。和xcode找到远程repo，也可以推送。|2524939|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/user/repo.git^0|13|W|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

you need first add a remote repository: git remote add yourname <a href="https://github.com/user/repo.git" rel="nofollow">https://github.com/user/repo.git</a>

and than push... and xcode find the remote repo and can push too.

blocks|key|46567|text|在Xcode或命令行中添加远程存储库时(从何处添加并不重要)，请确保使用存储库的完整路径。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|46568|例如：|46569|在命令行中，只需指定|46570|git+remote+add+<name>+gituser@gitserver:example.git|code-block|syntax|javascript|46571|当您的example.git位于gituser的主目录中时。然而，Xcode无法处理这个注释，当您尝试将提交推送到这个远程存储库时，Xcode会显示"No+remotes+found“。|46572|为了满足Xcode，您应该键入完整的路径，如下所示：|46573|git+remote+add+<name>+gituser@gitserver:/home/gituser/example.git|46574|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|U|8|@]|9|@]|A|$]]|$1|F|3|G|5|H|7|V|8|@]|9|@]|A|$I|J]]|$1|K|3|L|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|X|8|@]|9|@]|A|$]]|$1|O|3|P|5|H|7|Y|8|@]|9|@]|A|$I|J]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

When you add the remote repository in Xcode or in command line (doesn't matter from where you add it) make sure that you use the full path for your repository.

E.g.:

From commandline it's enough to specify 

<pre><code>git remote add &lt;name&gt; gituser@gitserver:example.git
</code></pre>

when your example.git is located in gituser's home directory. However Xcode can't deal with this annotation and says "No remotes found" when you try pushing your commits to this remote repository.

In order to satisfy Xcode you should type the whole path like: 

<pre><code>git remote add &lt;name&gt; gituser@gitserver:/home/gituser/example.git
</code></pre>

blocks|key|2525060|text|我在使用SSH定义的主机时也遇到过同样的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2525061|我的~/.ssh/config看起来像这样：|offset|length|style|CODE|2525062|Host+myGitServer
HostName+{real+address+goes+here}
{Some+more+config+for+the+host+here}|code-block|syntax|javascript|2525063|我的存储库远程URL的格式是ssh://myGitServer/git/project.git|2525064|问题在于，XCode没有读取SSH配置来解析"myGitServer“，因此存储库始终处于”离线“状态。我最终在/etc/hosts中添加了"myGitServer“。|2525065|我猜“找不到远程服务器”问题是由于XCode不能直接解析GIT远程服务器的名称造成的。|2525066|entityMap^0|0|2|D|0|0|E|X|0|1K|A|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@$D|W|E|X|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|Y|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|Z|8|@$D|10|E|11|F|G]]|9|@]|A|$]]|$1|O|3|P|5|6|7|12|8|@$D|13|E|14|F|G]]|9|@]|A|$]]|$1|Q|3|R|5|6|7|15|8|@]|9|@]|A|$]]|$1|S|3|-4|5|6|7|16|8|@]|9|@]|A|$]]]|T|$]]

I've had the same issue with SSH defined hosts. 
My <code>~/.ssh/config</code> looks like this:

<pre><code>Host myGitServer
HostName {real address goes here}
{Some more config for the host here}
</code></pre>

My repository remote URL was in the form of <code>ssh://myGitServer/git/project.git</code>

The problem was that XCode did not read the SSH config to resolve "myGitServer" so the repository was always "offline" for it.
I ended up adding "myGitServer" to <code>/etc/hosts</code>.

I guess that among other things, the "no remotes found" issue is caused when XCode can't directly resolve the name of the GIT remote server.

blocks|key|47603|text|我在使用Xcode+4.6.3时也遇到了同样的问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|47604|以下是我为解决此问题而执行的步骤：|47605|1.Xcode中的我转到文件->源码控制->存储库(打开管理器)|offset|length|style|BOLD|47606|2.然后我从树中为我遇到问题的存储库选择了远程对象。|47607|3.我的遥控器名为origin，但是在展开它时，我注意到它没有与之关联的分支。|47608|4.然后我选择了远程原点并按下了Remove+remote选项，这将从视图中删除远程原点。|47609|5.然后我去了一个终端，重新添加了遥控器：|47610|`git+remote+add+origin+http://username@localhost:7990/scm/iac/main-repository.git`|code-block|syntax|javascript|47611|6.然后我需要将分支添加到这个遥控器，最初无法正常工作，所以我使用-f命令强制它。我使用的命令是：-|47612|`git+push+origin+master+-f`|47613|注意：可以跳过第4步和第5步，直接转到第6步。我已卸下遥控器，因此没有机会进行测试。|47614|注2:您需要重新启动Xcode+(或者可能只是重新启动管理器)才能看到remote和branch现在可用。|47615|entityMap^0|0|0|0|9|0|0|2|0|0|2|0|0|2|0|0|2|0|0|0|2|0|0|0|3|0|0|3|0^^$0|@$1|2|3|4|5|6|7|16|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|17|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|18|8|@$F|19|G|1A|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|1B|8|@$F|1C|G|1D|H|I]]|9|@]|A|$]]|$1|L|3|M|5|6|7|1E|8|@$F|1F|G|1G|H|I]]|9|@]|A|$]]|$1|N|3|O|5|6|7|1H|8|@$F|1I|G|1J|H|I]]|9|@]|A|$]]|$1|P|3|Q|5|6|7|1K|8|@$F|1L|G|1M|H|I]]|9|@]|A|$]]|$1|R|3|S|5|T|7|1N|8|@]|9|@]|A|$U|V]]|$1|W|3|X|5|6|7|1O|8|@$F|1P|G|1Q|H|I]]|9|@]|A|$]]|$1|Y|3|Z|5|T|7|1R|8|@]|9|@]|A|$U|V]]|$1|10|3|11|5|6|7|1S|8|@$F|1T|G|1U|H|I]]|9|@]|A|$]]|$1|12|3|13|5|6|7|1V|8|@$F|1W|G|1X|H|I]]|9|@]|A|$]]|$1|14|3|-4|5|6|7|1Y|8|@]|9|@]|A|$]]]|15|$]]

I had the same problem with Xcode 4.6.3.

Here are the steps I performed to resolve the problem:

1. In Xcode I went to File -> Source Control -> Repositories (which opens the Organizer)

2. I then selected the Remotes object from the tree for the Repository I was having the problem with.

3. My remote was named origin, however when expanding it, I noticed it did not have a Branch associated with it.

4. I then selected the remote origin and pressed the Remove Remote option, which removed the remote origin from the view.

5. I then went to a terminal and re-added the remote with:-

<pre><code>`git remote add origin http://username@localhost:7990/scm/iac/main-repository.git`
</code></pre>

6. I then needed to add the branch(es) to this remote, which did not worked correctly initially, so I then forced it using the -f command. The command I used was:-

<pre><code>`git push origin master -f`
</code></pre>

Note: It may have been possible to skip steps 4 and 5 and just go straight to step 6. I had removed the remote, so did not have the chance to test this.

Note 2: You will need to restart Xcode (or possibly just the Organizer) to see that the remote and branch are now available.

blocks|key|2734550|text|我遇到了一个类似的问题，远程主机无法加载，特别是作为远程主机的kiln。在git配置中查找存储库信息，URL已更改为在其前面加上我的电子邮件地址。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2734551|所以我简单地退出了Xcode，然后从命令行退出：|2734552|git+remote+set-url+kiln+https://...kiln+repo+name.git|code-block|syntax|javascript|2734553|当我重新启动Xcode时，这似乎解决了这个问题--+pull和push都能再次工作。|2734554|我不知道为什么Xcode破坏了URL。这是在Xcode4.6.3中|2734555|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Q|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|R|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|S|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

I had a similar problem where remotes were failing to load, specifically for kiln as the remote host. Looking in the git config for the repository info, the URL had been changed to prepend my email address to it.

So I simply exited Xcode, and then from the command line did:

<pre><code>git remote set-url kiln https://...kiln repo name.git
</code></pre>

And that seemed to fix it when I restarted Xcode - both pull &amp; push worked again.

I have no idea why Xcode corrupted the URL. This was with Xcode 4.6.3

blocks|key|2525129|text|1-搜索并应用指南。其中提到了“在mac+finder中显示所有隐藏文件”。并删除.git目录(如果不解决文章-1，此文件夹将不会出现)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2525130|2-+xcode+>Prefence>Accounts>Delete+github+account并关闭xcode。然后通过添加所有内容来打开和重新配置相同的github帐户。|2525131|3-点击部分的小图标，即“源码管理导航”(靠近项目导航器)。当您右键单击时，将出现一个弹出窗口。然后选择在github上创建blabla“。实际上，这个步骤解决了同样的问题。|2525132|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

1- search and apply the guideline. which is mentioned about "show all hidden files in mac finder". and delete .git directory (this folder wont appear without solving article-1)

2-XCode>Prefences>Accounts>Delete github account and close xcode. than open and reconfigure same github account by adding all over.

3-click the section small icon namely "source control navigation" (which is near the project navigator). as you right click a popup will appear. and choose create blabla on github". actually this steps solved same issue.

blocks|key|2734615|text|Xcode+10.2.1|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|2734616|仔细检查：|2734617|1)+preferences下的Git+Acc。2)+cmd+%2B+2，在remote下右击创建一个remote。|2734618|entityMap^0|0|C|0|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|O|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|P|8|@]|D|@]|E|$]]|$1|J|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|K|$]]

Xcode 10.2.1

Double Check:

1) Git Acc under preferences.
2) cmd + 2, right click under remote to create a remote.

Post-installation of 10.8 and Xcode 4.4 when I try to push to a remote using the Xcode integration Xcode is telling me 'no remotes found'. I am still able to push successfully via command line so my actual repositories are fine. I've installed the command line tools and have tried restarting Xcode several times. Additionally, if I go to Organizer and try to select the repository all I get is a spinning activity indicator. If I select 'remotes' for a given repository it's blank. Note that Xcode does recognize git is available though as it does show which files are modified and allows commits. Reported system git version in /usr/bin/ is:

<pre><code>git version 1.7.9.6 (Apple Git-31.1)
</code></pre>

Is anyone else experiencing this, or do you have any suggestions for a remedy (or at least a place to look at a log to see what is going wrong)?

UPDATE 10/18/13

This issue has been resolved in Xcode 5.

Xcode 4.4 - no remotes found

命令行工具

服务器

Xcode

安装10.8和Xcode 4.4后，当我尝试使用Xcode集成推送到遥控器时，Xcode告诉我“找不到遥控器”。我仍然可以通过命令行成功推送，所以我的实际存储库很好。我已经安装了命令行工具，并多次尝试重新启动Xcode。此外，如果我转到Organizer并尝试选择存储库，我得到的只是一个旋转活动指示器。如果我为一个给定...

问Xcode 4.4 -未找到遥控器
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Xcode 4.4 -未找到遥控器EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Xcode 4.4 -未找到遥控器
EN