blocks|key|1416469|text|尝试更新与xampp捆绑在一起的PHP版本。您可能需要更新一些php_XXX.dll扩展文件。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1416470|更多信息：http://web2.0entrepreneur.com/31/cli-has-stopped-working-on-windows-vista.html|offset|length|1416471|entityMap|0|LINK|mutability|MUTABLE|url|http://web2.0entrepreneur.com/31/cli-has-stopped-working-on-windows-vista.html^0|0|5|26|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@]|9|@$D|P|E|Q|1|R]]|A|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|M]]]]

Try updating your PHP version bundled with xampp. You might have to update some php_XXX.dll extension files.

More info: <a href="http://web2.0entrepreneur.com/31/cli-has-stopped-working-on-windows-vista.html" rel="noreferrer">http://web2.0entrepreneur.com/31/cli-has-stopped-working-on-windows-vista.html</a>

blocks|key|1201945|text|PHP-CLI在以下情况下停止:+Windows+7+64位，PHP+5.6.8+64位，仅当Zend+OpCache扩展被启用时！只需编辑php.ini并注释zend_extension=php_opcache.dll+(前面有;+)|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1201946|entityMap^0|1Y|7|28|U|37|1|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

PHP-CLI stops under these circumstances: Windows 7 64bit, PHP 5.6.8 64bit, only when Zend OpCache extension is ENABLED!!!
Just edit <code>php.ini</code> and comment <code>zend_extension=php_opcache.dll</code> (with <code>;</code> in front of it)

blocks|key|1201416|text|我发现当我启用了APC扩展时，这种情况会发生在我身上。我转而使用Wincache+for+PHP扩展。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1201417|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I found that this happened to me when I had the APC extension enabled. I switched to using the Wincache for PHP extension instead.

blocks|key|1201538|text|如果您在安装WAMP后收到此错误，很可能是您的计算机上安装了另一个PHP。这可能是使用Microsoft+Web+Platform安装程序或通过其他方式安装的。你应该做的第一件事就是卸载PHP。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1201539|如果这不起作用，请检查以确保IIS和Apache没有尝试使用相同的端口。WAMP以80端口作为标准端口启动，而IIS通常也是一样的。修复此问题的最简单方法是在运行WAMP时关闭IIS，但您可以将这两个服务器中的任何一个设置为端口81或其他端口。|1201540|如果这不起作用，我的最后一个建议是在您的机器上查找多个php.ini副本。您可以在Windows目录等位置找到它们。备份文件以防万一，然后将其从除WAMP文件夹以外的所有文件夹中删除。|1201541|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

If you receive this error after installing WAMP, most likely you have another installation of PHP on your machine. This may have been installed using the Microsoft Web Platform Installer or by other means. The first thing you should do is un-install PHP.

If this doesn't work, check to make sure that IIS and Apache are not trying to use the same port. WAMP starts out with Port 80 as standard and IIS usually will be the same. The easiest way to fix this is to turn off IIS while running WAMP, but you can set either of them servers to port 81 or another port.

If this doesn't work, my last suggest is to look for multiple copies of php.ini on your machine. You may find them in places like the Windows directory. Make a backup of the file just in case, and then remove them from all of the folders except the WAMP folder.

blocks|key|1416493|text|对我来说，解决方案是停止使用PHP+5.3.0并返回到5.2.11。一旦我这样做了，"CLI已停止工作“的问题消失了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1416494|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

The solution for me was to stop using PHP 5.3.0 and go back to 5.2.11. Once I did this the "CLI has stopped working" issue disappeared.

blocks|key|1416553|text|我在Windows+7专业版上也遇到了同样的问题。我的Apache服务器在我的web应用程序中查找和执行PHP没有问题，但命令行执行给出了一条臭名昭著的消息"CLI已停止工作“。用户帐户设置似乎允许执行。Perl没有问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1416554|我总是必须把我的代码带到XP机器上，并在那里运行它来调试它。|1416555|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I have the same issue with Windows 7 Professional.
My Apache Server has no problem finding and executing PHP within my web application but the command line execution gives the infamous message "CLI has stopped working."
The User Account Settings seem to allow executions.
Perl has no problem.

I always have to take my code to an XP machine and run it there to debug it.

blocks|key|1201791|text|您没有指定要使用xdebug，但为了以防万一，我也许可以提供帮助。我有这个错误很长一段时间了。原来我使用的是一个稍微老一点的Xdebug版本(php_xdebug-2.2.0-5.4-vc9.dll)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1201792|我将该文件替换为"php_xdebug-2.2.2-5.4-vc9.dll“，它神奇地立即开始工作。|1201793|我在wamp上，我用最新的文件名更新了两个php.ini文件(一个用于cli，一个用于正常使用)。“c:\wamp\bin\php\php5.4.3\ext\php_xdebug-2.2.2-5.4-vc9.dll”=zend_extension|1201794|然后将新文件放入php+ext文件夹，并立即成功。|1201795|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

You didn't specify that you were using xdebug, but just in case you were, I may be able to help. I had this error for a long time. It turned out I was on a slightly older version of Xdebug (php_xdebug-2.2.0-5.4-vc9.dll). 

I replaced that file with "php_xdebug-2.2.2-5.4-vc9.dll" and it magically started working immediately. 

I'm on wamp, and I updated both php.ini files (one is for cli, one for normal use) with the latest filename.
"zend_extension = c:\wamp\bin\php\php5.4.3\ext\php_xdebug-2.2.2-5.4-vc9.dll"

Then dropped the new file into the php ext folder and instant success.

blocks|key|1201901|text|我在Windows7(家庭高级版)上也遇到了同样的问题。我有一种预感，它是由我安装的一个扩展引起的，所以我开始逐个注释它们。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1201902|原来它是由我使用的一个不兼容的mongodb扩展引起的|1201903|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had the same issue on Windows 7 (Home premium). I had a hunch that it is caused by one of the extensions I installed so I started commenting them out one-by-one.

Turned out it was caused by a non-compatible mongodb extension I was using

blocks|key|1417123|text|编辑php.ini并注释zend_extension=opcache.enable_cli=1+(前面有；)|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1417124|entityMap^0|2|7|C|Z|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

Edit <code>php.ini</code> and comment <code>zend_extension=opcache.enable_cli=1</code> (with ; in front of it)

blocks|key|1417167|text|尝试使用另一个php版本来代替。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1417168|它非常适合我。|1417169|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Try to use another php version instead.
It works perfectly for me.

blocks|key|1202002|text|尝试使用php-cgi.exe而不是php.exe运行脚本。对我来说，这是可行的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1202003|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Try to run scripts with php-cgi.exe instead of php.exe. For me it works.

I recently installed Windows 7 on my desktop and the following problem has begun occuring:

I regularly run some PHP scripts from the commandline that are now giving this error in a popup window:

<pre><code>CLI has stopped working.
</code></pre>

I cancel this and my script terminates. Not good...

I've googled around and tried most of the few ideas suggested but still i am plagued by this annoyance. Right now it appears to regularly occur when I do a file_get_contents() of a url pointing to an image file. Only happens when the url is http protocol, works fine for ftp files. It also happens spuriously doing other things as well.

This is PHP 5.3.0 as distributed in a xampp 1.7.2 .zip. All exe's and dll's have been unblocked by copying thru FAT32 and back.

hints from anyone who's cracked this would be most helpful.

PHP -> CLI has stopped working

服务器

Windows

Perl

我最近在桌面上安装了Windows 7，但开始出现以下问题：我经常从命令行运行一些PHP脚本，它们现在会在弹出窗口中显示此错误：CLI has stopped working.我取消了它，我的脚本就终止了。不好..。我已经在谷歌上搜索并尝试了建议的少数几个想法中的大多数，但我仍然被这种烦恼所困扰。现在，当我对指向图像文件的url执行file_get_contents()时，它似乎经常发生。只有当u

问PHP -> CLI已停止工作
EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问PHP -> CLI已停止工作EN

回答 11

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问PHP -> CLI已停止工作
EN