blocks|key|55762|text|(因为你的评论表明一周后你仍然有这个问题，所以这可能对你没有帮助，但…)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|55763|我遇到了这个问题，在6.1中添加一个新的(Swift)测试并不能使它显示在“测试导航器”或方案编辑器中--重启Xcode解决了这个问题，现在我可以单独运行这些测试了。|55764|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

(Since your comment indicates you're still having this problem after a week, this might not help you, but…)

I ran into this problem where adding a new (Swift) test in 6.1 wouldn't make it show up in the "Test Navigator" or the scheme editor -- restarting Xcode fixed the problem and now I can run the tests individually.

blocks|key|4562268|text|我也有过类似的错误(虽然在Objective+C中，不是swift)。如果我在类中添加了一个新的测试方法，那么这个新方法既不会出现在测试导航器中，也不会在我运行整个包时执行。我也不会在每个方法旁边的侧边栏中看到那些点，如果单击这些点，将只运行一个测试方法。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4562269|我唯一解决的问题是删除整个测试类(暂时将其内容保存在其他地方)，然后重新创建测试类，然后(也许更仔细？)重新设置构建设置。|4562270|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had a similar error (though in Objective C, not swift). If I added a new test method to the class, the new method wouldn't show up in the test navigator nor would it be executed when I ran the whole bundle. I also wouldn't get those dots in the side bar next to each method that, if clicked, would run just one test method. 

The only thing fixed my problem was deleting my whole test class (saving its contents elsewhere temporarily) then recreating the test class and (perhaps more carefully?) setting the build settings all over again.

blocks|key|4562297|text|对我来说，“修复”是添加一个新的测试。我编了些废话：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4562298|func+testThatNothing()+{
++++XCTAssertTrue(true,+"True+should+be+true")
}|code-block|syntax|javascript|4562299|当我再次运行测试时，编辑器可以识别该文件中的所有测试。我删除了伪造的测试，但它仍然是好的。不幸的是，我不得不在每个文件中这样做，但至少它可以工作。希望这对某些人有帮助。|4562300|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

The "fix" for me was to add a new test. I made up some nonsense:

<pre><code>func testThatNothing() {
 XCTAssertTrue(true, "True should be true")
}
</code></pre>

When I ran the tests again, all the tests in that file were recognized by the editor. I deleted the bogus test and it's all still fine. Unfortunately I had to do this in each file, but at least it works. Hope this helps someone.

blocks|key|4562368|text|问题解决了。我所要做的就是启动"Window+->+Projects“窗口并删除”派生数据。在索引之后，所有的测试都在工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4562369|与此同时，苹果正在逐步修复Xcode6.3编辑器中的bug。|4562370|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Problem is solved. All I have to do is to launch the "Window -> Projects" window and delete the "Derived Data. After indexing all tests are working. 

In the meanwhile apple is fixing the bugs in the Xcode 6.3 editor bit by bit.

blocks|key|4562422|text|我也有同样的问题。只需确保每个测试用例都有某种XCTAssert()语句即可。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4562423|func+testSomething(){
+++++XCTAssert(true,+"Pass")
}|code-block|syntax|javascript|4562424|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I had the same problem too. Just make sure each of your test cases has some sort of XCTAssert() Statements.

<pre><code>func testSomething(){
 XCTAssert(true, "Pass")
}
</code></pre>

blocks|key|4562451|text|对我来说，修复方法是在所有方法前加上'test‘前缀|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4562452|即|4562453|func+arrayResponseCall()+|code-block|syntax|javascript|4562454|应该是：|4562455|func+testArrayResponseCall()|4562456|entityMap^0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Q|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|R|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|S|8|@]|9|@]|A|$G|H]]|$1|M|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|N|$]]

For me the fix was to prefix all method with 'test'

i.e. 

<pre><code>func arrayResponseCall() 
</code></pre>

should be: 

<pre><code>func testArrayResponseCall()
</code></pre>

blocks|key|56026|text|有时，您需要做的就是等待Xcode完成对所有文件的索引。对于大型项目，我的单元测试导航器视图在完成之前通常是空的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|56027|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Sometimes all you need to do is wait for Xcode to finish indexing all your files. For large projects my unit test navigator view is frequently empty until it finishes.

blocks|key|4562551|text|对我来说，选择Product->Test并等待一段时间就足够了。当测试开始运行时，所有的菱形都可用|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4562552|entityMap^0|7|D|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

For me it was enough to select <code>Product-&gt;Test</code> and wait a bit. When the tests just start running all the diamonds become available

blocks|key|56138|text|确保测试用例名称以“project.the”开头，然后是您想要的任何名称，然后构建(cmd%2BB)测试菱形将出现！！。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|56139|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Make sure the test case name begins with "test" followed by any name you want and build(cmd+B) the project.the diamond will appear!!.

blocks|key|56222|text|当您添加新测试时，保存文件(Cmd%2BS)，菱形将出现(在Xcode7.3上验证)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|56223|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

When you add a new test, save the file (Cmd+S) and the diamond will appear (verified on Xcode 7.3)

blocks|key|56360|text|对我来说，我需要在下面添加测试|type|unstyled|depth|inlineStyleRanges|entityRanges|data|56361|📷|atomic|offset|length|56362|​|56363|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/e152f7096d2b8542520a039db5205ca0.png|imageAlt^0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|S|8|@]|9|@$E|T|F|U|1|V]]|A|$]]|$1|G|3|H|5|6|7|W|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|X|8|@]|9|@]|A|$]]]|J|$K|$5|L|M|N|A|$O|P|Q|-4]]]]

For me , I need to add Tests to below here <a href="https://i.stack.imgur.com/DSBbq.png" rel="noreferrer"><img src="https://i.stack.imgur.com/DSBbq.png" alt="enter image description here"></a>

blocks|key|4562870|text|我只需将private方法转换为public就解决了我的问题。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|4562871|因此，如果这是你面临的相同问题，那么切换：|4562872|private+func+testString()|code-block|syntax|javascript|4562873|至：|4562874|public+func+testString()|4562875|entityMap^0|4|7|G|6|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@$9|T|A|U|B|C]|$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|X|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|Y|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|Z|8|@]|D|@]|E|$]]|$1|O|3|P|5|J|7|10|8|@]|D|@]|E|$K|L]]|$1|Q|3|-4|5|6|7|11|8|@]|D|@]|E|$]]]|R|$]]

I solved my problem just turning the <code>private</code> methods into <code>public</code>. 

So, if this is the same problema you're facing, switch:

<pre><code>private func testString()
</code></pre>

to:

<pre><code>public func testString()
</code></pre>

blocks|key|4562938|text|以下是对我起作用的方法。即使单元测试说它有0个测试可用，我点击了play，然后它运行了所有4个测试，然后它显示了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4562939|​|4562940|📷|atomic|offset|length|4562941|4562942|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/9a0742e28869279b1e7b17509e38fb27.png|imageAlt^0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@$G|V|H|W|1|X]]|A|$]]|$1|I|3|C|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q|R|-4]]]]

Here is what worked for me. Even though the unit test says it has 0 tests available, I clicked play, and then it ran through all 4 tests and then it showed. 

<a href="https://i.stack.imgur.com/gX4d2.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/gX4d2.png" alt="enter image description here"></a>

blocks|key|4562998|text|在我的例子中，我引用了一个导致问题的旧测试目标，所以我摆脱了缺失的目标并清理了解决方案，然后我的测试用例工作得很好。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4562999|​|4563000|📷|atomic|offset|length|4563001|4563002|另外，请确保您创建的测试方法应该始终以关键字"test"开头，否则Xcode将无法识别测试方法，例如|style|CODE|4563003|func+test_getPhotos_With_Good_Request_Returns_PhotoCollection(){

++++//ARRANGE

++++//ACT

+++//ASSERT

}|code-block|syntax|javascript|4563004|希望能有所帮助|4563005|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/1b974d76140c4699918798bea674bf55.png|imageAlt^0|0|0|0|1|0|0|0|M|6|0|0|0^^$0|@$1|2|3|4|5|6|7|13|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|14|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|15|8|@]|9|@$G|16|H|17|1|18]]|A|$]]|$1|I|3|C|5|6|7|19|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|1A|8|@$G|1B|H|1C|L|M]]|9|@]|A|$]]|$1|N|3|O|5|P|7|1D|8|@]|9|@]|A|$Q|R]]|$1|S|3|T|5|6|7|1E|8|@]|9|@]|A|$]]|$1|U|3|-4|5|6|7|1F|8|@]|9|@]|A|$]]]|V|$W|$5|X|Y|Z|A|$10|11|12|-4]]]]

In my case I had a reference to an old test target which was causing the issue, so I got rid of the missing target and clean the solution and then my test cases were working fine.

<a href="https://i.stack.imgur.com/fHO4z.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/fHO4z.png" alt="Xcode test Schemes"></a>

Also make sure that the test methods you create should always start with the keyword <code>"test"</code> else Xcode won't be able to identify the test methods an example of the same is

<pre><code>func test_getPhotos_With_Good_Request_Returns_PhotoCollection(){

 //ARRANGE

 //ACT

 //ASSERT

}
</code></pre>

Hope it helps

I have a problem that the Xcode IDE 6 doesn't detect my swift unit test cases correctly. When I run the unit tests, all tests were executed.

But in the IDE while editing the unit tests aren't recognized. I have to run the whole unit test suite in order to run a single test.

I couldn't figure out how I avoid this glitch.

<img src="https://i.stack.imgur.com/xwzfD.png" alt="enter image description here">

Xcode 6 Editor doesn't recognize unit tests

单元测试

Swift

Xcode

我有一个问题，Xcode IDE 6不能正确检测我的swift单元测试用例。当我运行单元测试时，所有的测试都执行了。但是在IDE中，当编辑时，单元测试是不被识别的。为了运行一个测试，我必须运行整个单元测试套件。我不知道如何避免这个小故障。​​

问Xcode 6编辑器不识别单元测试
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Xcode 6编辑器不识别单元测试EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Xcode 6编辑器不识别单元测试
EN