blocks|key|224976|text|更好的做法是，将编辑器配置为您熟悉的内容(例如gedit)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|224977|git+config+--global+core.editor+"gedit"|code-block|syntax|javascript|224978|您可以像这样读取当前配置：|224979|git+config+core.editor|224980|您还可以从命令行添加提交消息。|224981|git+commit+-m+"blablabla"|224982|并且编辑器一开始就不会打开。|224983|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|W|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|O|3|P|5|6|7|Y|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

Better yet, configure the editor to something you are comfortable with (gedit as an example):

<pre><code>git config --global core.editor "gedit"
</code></pre>

You can read the current configuration like this:

<pre><code>git config core.editor
</code></pre>

You can also add the commit message from the command line.

<pre><code>git commit -m "blablabla"
</code></pre>

and the editor will not be opened in the first place.

blocks|key|225008|text|我遇到了这个问题，我收到了一个类似">“的提示符，但我无法提交。我将注释中的“替换为‘，它起作用了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|225009|我希望这对某些人有帮助！|225010|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had this problem I received a ">" like prompt and I couldn't commit.
I replace the " in the comment with ' and it works.

I hope this help someone!

blocks|key|225050|text|Nano的替代品(可能会让你的生活更轻松)：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|225051|在Windows上，使用记事本。在命令提示符下键入：|225052|git+config+core.editor+notepad|offset|length|style|CODE|225053|在Ubuntu+/+Linux上，使用文本编辑器(gedit)。在终端窗口中键入：|225054|git+config+core.editor+gedit|225055|entityMap^0|0|0|0|U|0|0|0|S|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Q|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|R|8|@$F|S|G|T|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|U|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|V|8|@$F|W|G|X|H|I]]|9|@]|A|$]]|$1|N|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|O|$]]

Alternatives to Nano (might make your life easier):

On Windows, use notepad. In command prompt type:

<code>git config core.editor notepad</code>

On Ubuntu / Linux, use text editor (gedit). In terminal window type:

<code>git config core.editor gedit</code>

blocks|key|225102|text|我不确定将您带到>提示符的组合键，但据我所知，它不是bash提示符。我通常是偶然得的。Ctrl%2BC+(或D)使我返回到$提示符。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|225103|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Not sure the key combination that gets you there to the > prompt but it is not a bash prompt that I know. I usually get it by accident. Ctrl+C (or D) gets me back to the $ prompt.

blocks|key|443341|text|在git+commit命令之后，您进入编辑器，所以首先点击i，然后开始输入。提交消息后，点击Ctrl+%2B+c，然后点击:wq|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|443342|entityMap^0|1|A|T|1|1A|8|1N|3|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|G|$]]

After <code>git commit</code> command, you entered to the editor, so first hit <code>i</code> then start typing. After committing your message hit <code>Ctrl + c</code> then <code>:wq</code>

blocks|key|225189|text|请注意，如果你使用Sublime作为你的提交编辑器，你是need+the+-n+-w+flags，否则git会一直认为你的提交消息是空的并中止。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|225190|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/a/42321341/792238^0|11|5|S|K|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@$9|O|A|P|B|C]]|D|@$9|Q|A|R|1|S]]|E|$]]|$1|F|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|G|$H|$5|I|J|K|E|$L|M]]]]

Note that if you're using Sublime as your commit editor, you <a href="https://stackoverflow.com/a/42321341/792238">need the <code>-n -w</code> flags</a>, otherwise git keeps thinking your commit message is empty and aborting.

blocks|key|443409|text|在Mac+1中，按shift%2BZ+shift%2BZ+(大写Z键两次)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|443410|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

In Mac 
 1.Press shift+Z shift+Z (capital Z twice).

blocks|key|225233|text|你只需点击钥匙。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|225234|首先按ESC+%2B+enter，然后按:x+%2B+enter|225235|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

You Just clicking the key.
first press ESC + enter and
then press :x + enter

I'm new to git and learning from a PDF.
I just executed a command <code>$ git commit</code> and it opens a new editor. But I'm trying to close that new commit editor. How to do this? I'm using git on windows.

Git - How to close commit editor?

Windows

Ubuntu

Linux

我是git新手，也是从PDF学习的新手。我刚刚执行了一个命令$ git commit，它会打开一个新的编辑器。但我正在尝试关闭新的提交编辑器。该怎么做呢？我在windows上使用git。

问Git -如何关闭提交编辑器？
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Git -如何关闭提交编辑器？EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Git -如何关闭提交编辑器？
EN