blocks|key|246467|text|此错误通常是由从不再存在的目录中运行命令引起的。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|246468|尝试更改目录，然后重新运行该命令。|246469|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

This error is usually caused by running a command from a directory that no longer exist.

Try changing your directory and re-run the command.

blocks|key|463155|text|请检查目录路径是否存在。如果文件夹不存在于您运行命令的位置，则会出现此错误。您可能在命令行中从同一路径执行了删除命令。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|463156|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Please check the directory path whether exists or not. This error comes up if the folder doesn't exists from where you are running the command. Probably you have executed a remove command from same path in command line.

blocks|key|463202|text|尝试下面的命令，它对我很有效。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|463203|cd;+cd+-|code-block|syntax|javascript|463204|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Try the following command, it worked for me.

<pre><code>cd; cd -
</code></pre>

blocks|key|246690|text|在Ubuntu+16.04.3+LTS中，下面的命令对我有效：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|246691|exit|code-block|syntax|javascript|246692|然后我又重新登录了。|246693|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

In Ubuntu 16.04.3 LTS, the next command works for me:

<pre><code>exit
</code></pre>

Then I've login again.

blocks|key|463319|text|即使我在使用python+virtualenv时也遇到了同样的问题，它可以通过简单的重启得到纠正。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|463320|sudo+shutdown+-r+now|code-block|syntax|javascript|463321|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Even i was having the same problem with python virtualenv 
It got corrected by a simple restart 

<pre><code>sudo shutdown -r now
</code></pre>

blocks|key|463351|text|这有时会发生在符号链接上。如果遇到此问题，并且您知道自己位于现有目录中，但符号链接可能已更改，则可以使用以下命令：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|463352|cd+$(pwd)|code-block|syntax|javascript|463353|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

This can happen with symlinks sometimes. If you experience this issue and you know you are in an existing directory, but your symlink may have changed, you can use this command:

<pre><code>cd $(pwd)
</code></pre>

blocks|key|463390|text|这也发生在我的一个重新创建的目录上，该目录是相同的，但要让它再次工作，只需运行：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|463391|cd+.|code-block|syntax|javascript|463392|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

That also happened to me on a recreated directory, the directory is the same but to make it work again just run:

<pre><code>cd .
</code></pre>

blocks|key|463457|text|在我的例子中，上面的一切都没有起作用。在用头撞墙一段时间后，我发现我已经通过运行定制的-+linux+-+server+-setup-bash-script销毁了/etc/passwd条目，这个脚本以前工作得很好，但这次"sed“命令中的正则表达式删除了所有现有的条目:D从另一个工作的linux服务器上复制粘贴默认条目后，我终于可以重新启动sshd了。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|463458|因此，在对原始/etc/passwd文件应用任何正则表达式替换之前，不要忘记备份它:)|463459|entityMap^0|29|B|0|7|B|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|P|8|@]|D|@]|E|$]]]|I|$]]

In my case nothing above has worked. After banging my head against the wall for a while I've found out, that I've destroyed the <code>/etc/passwd</code> entries by running a custom-made-linux-server-setup-bash-script which worked well previously, but this time the regex within the "sed" command erased all the existing entries :D 
After copy pasting the default entries from another working linux server I could finally restart sshd. 

So don't forget to backup the original <code>/etc/passwd</code> file before applying any regex replacements on it :)

I am trying to compile ARM code in Ubuntu 12.

Everything is working fine when I put the code in the local directory.

But when I put the code in cited mount directory error shows up:

<pre><code>making testXmlFiles
sh: 0: getcwd() failed: No such file or directory
ARM Compiling xxxxx.c
sh: 0: getcwd() failed: No such file or directory
</code></pre>

Here is my setting in fstab

<pre><code>//10.0.0.1/data /mnt/data cifs auto,noserverino,credentials=/root/.smbcredentials,file_mode=0777,dir_mode=0777,uid=user,gid=users,noperm 0 0
</code></pre>

What is going on here? What could cause this error?

sh: 0: getcwd() failed: No such file or directory on cited drive

服务器

Ubuntu

我正在尝试用Ubuntu 12编译ARM代码。当我将代码放在本地目录中时，一切都运行正常。但是当我把代码放到引用的挂载目录中时，出现了错误：making testXmlFilessh: 0: getcwd() failed: No such file or directoryARM Compiling xxxxx.cs...

问sh: 0: getcwd()失败:引用的驱动器上没有这样的文件或目录
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问sh: 0: getcwd()失败:引用的驱动器上没有这样的文件或目录EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问sh: 0: getcwd()失败:引用的驱动器上没有这样的文件或目录
EN