blocks|key|4529870|text|检查您的Windows是否有挂起的更新。重新启动后，安装工作按预期进行。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4529871|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Check if your Windows has pending updates. After the restart, installation worked as expected.

blocks|key|4529879|text|在Visual+Studio准备工作中遇到困难时：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4529880|我用更高的PID杀死了vs_enterprise.exe，Visual+Studio抛出了一个错误，“管道正在关闭”。已重新启动PC并登录。Visual+Studio自动启动，并已在1分钟内完成。|4529881|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

When stuck on Visual Studio Preparation:

I killed vs_enterprise.exe with higher PID, Visual Studio threw an error, that "pipe is being closed". Restarted PC &amp; Logged in. Visual Studio started automatically and has completed within 1 minute.

blocks|key|22259|text|要确定某个子安装程序是否被阻塞，更好的方法是监视其网络和磁盘I/O活动。Sysinternals的Process+Explorer做得很好。Android+SDK安装程序下载大量数据(超过1+1GB)，CPU处于空闲状态，等待I/O绑定操作完成。在任何情况下，您都不应尝试终止任何进程，否则可能会损坏Visual+Studio的安装。在最坏的情况下，取消并重新运行安装程序应该会有所帮助。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22260|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

A better approach to find whether one of the subinstallers is blocked is to monitor its Network and Disk I/O activity. Process Explorer from Sysinternals does an excellent job. Android SDK Setup downloads large amounts of data (more than 1GB) and the CPU sits idle waiting for an I/O-bound operation to be completed. Under no circumstances you should attempt to kill any process, or you might risk corrupting your installation of Visual Studio. In the worst case scenario, cancelling and rerunning the setup should help.

blocks|key|4529915|text|我也有同样的问题。它会立即挂起，只要它说“正在应用Microsoft+Visual+Studio+2015”。进度条中只有一小条。我甚至让安装通宵运行。安装程序没有磁盘活动或CPU使用率。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4529916|最终起作用的是在任务管理器中终止进程并重新启动计算机。我一重启，安装程序就自动打开并成功完成。|4529917|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had the same issue. It would hang immediately, as soon as it said "Applying Microsoft Visual Studio 2015." There was only a small sliver in the progress bar. I even let the install run overnight. There was no disk activity or CPU usage from the installer.

What finally worked was to kill the process in Task Manager and restart the computer. As soon as I rebooted, the installer opened up automatically and completed successfully.

blocks|key|22287|text|我暂时禁用了我的杀毒软件(AVG)并重新启动了安装。这解决了它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22288|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I temporarily disabled my antivirus (AVG) and restarted the install. That fixed it.

blocks|key|22308|text|在我的例子中，UAC被禁用(臭名昭著的regedit技巧)，因此安装程序显然无法处理它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22309|你可以恢复到UAC安装程序，或者简单地尝试以管理员身份启动它，它对我很有效。|22310|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

In my case UAC was disabled (the infamous regedit trick) and so the installer clearly could not handle it. 

You could revert back to UAC for the installer, or simply try launching it as admin, it worked for me.

blocks|key|22354|text|好的，经过几个小时的谷歌搜索和失败的尝试，包括上面的许多建议，我找到了一个我一时兴起尝试的解决方案，并对我有效。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22355|尝试安装该程序，然后，当它被“卡住”时，取消它，但不要卸载。|22356|然后，转到控制面板，转到程序，然后尝试卸载它，选择“修复”而不是卸载。|22357|“修复”Visual+Studio似乎已经完全工作了，而且非常快，不到5分钟，一切似乎都工作得很好。|22358|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|K|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|L|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|M|8|@]|9|@]|A|$]]|$1|H|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|I|$]]

Alright so after hours of googling and failed attempts at solving this including many of the suggestions above, I found a solution I tried on a whim and worked for me.

Attempt to install the program, then, when it gets "stuck", cancel it, but don't uninstall.

Then, go to the control panel, go to programs, go and attempt to uninstall it, select "Repair" instead of Uninstall.

"Repairing" Visual Studio appears to have completely worked and was very quick, under 5 minutes and everything seems to work fine.

blocks|key|4530021|text|这个问题现在变得非常严重，特别是对于在windows10平台上安装visual+studio的用户。微软建议禁用防病毒和反恶意软件程序，并始终以管理员权限运行安装程序。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4530022|但在我的案例中，我必须做更多的事情来摆脱这个问题:+1.禁用AVG实时保护2.从任务管理器禁用AVG+3.从系统临时文件夹中删除所有文件和文件夹。(您可以通过键入%25temp%25并在运行提示符下按enter将其打开)+4.以管理员身份再次运行安装程序|4530023|这是一个complete+list+of+incidents+that+I+faced+in+this+issue+(visual+studio+2015+installation+got+stuck)|offset|length|4530024|And+how+I+resolved+it|4530025|entityMap|0|LINK|mutability|MUTABLE|url|http://www.codewithasp.net/2015/09/visual-studio-2015-installation-stuck-community-enterprise.html|1|http://www.codewithasp.net/2015/09/solution-for-visual-studio-2015-installation-stuck.html^0|0|0|4|2P|0|0|0|L|1|0^^$0|@$1|2|3|4|5|6|7|T|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|U|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|V|8|@]|9|@$F|W|G|X|1|Y]]|A|$]]|$1|H|3|I|5|6|7|Z|8|@]|9|@$F|10|G|11|1|12]]|A|$]]|$1|J|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q]]|R|$5|M|N|O|A|$P|S]]]]

This issue is becoming very now, specially for users installing visual studio on windows 10 platform. What Microsoft suggests is disable your anti virus and anti malware programs and always run setup with admin permission.

But in my case I have to do lot more things to get rid of this issue:
1. Disabled AVG realtime protaction
2. Disabled AVG from task manager
3. Remove all the files and folders from system temp folder. (You can open it by typing %temp% and hit enter in run prompt)
4. Run setup again as admin

Here is a <a href="http://www.codewithasp.net/2015/09/visual-studio-2015-installation-stuck-community-enterprise.html">complete list of incidents that I faced in this issue (visual studio 2015 installation got stuck)</a>

<a href="http://www.codewithasp.net/2015/09/solution-for-visual-studio-2015-installation-stuck.html">And how I resolved it</a>

blocks|key|22426|text|我刚刚在Windows+Server2012+R2上安装了VS2015企业版。安装是快速的，直到它达到更新1，在进度指示器上超过了90%25的标志。在这一点上，它花了大约2个小时才完成。在你尝试任何更激进的事情之前，要有耐心。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22427|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I just installed VS 2015 Enterprise on Windows Server 2012 R2. The install was fast until it reached Update 1 which is past the 90% mark on the progress indicator. At that point, it took about 2 hours to complete. Be patient before you try anything more radical.

blocks|key|4530110|text|我的应用程序被.NET+4.6.1卡住了。关闭互联网并禁用Microsoft+Security+Essentials+Real-time防护让一切重新开始。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4530111|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Mine got stuck applying the .NET 4.6.1 blah... Turning off the internet and disabling Microsoft Security Essentials Real-time protection got things moving again.

blocks|key|22523|text|我有一个问题，Visual+Studio+Update3安装程序停留在“功能”选项卡上，在installation...it的最开始只显示“Update2(已安装)”，没有其他内容，没有办法继续。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22524|在尝试了这里的其他一些更复杂的建议后，令我惊讶的是，我所需要做的就是在启动安装程序时使用“以管理员身份运行”。我的印象是，MSI通常以管理员权限运行(在受信任的安装程序服务下)，但我认为这种情况下的VS引导程序不是这样。|22525|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had an issue with the Visual Studio Update 3 installer getting stuck on the "Features" tab at ther very start of installation...it would show only "Update 2 (installed)" and nothing else, with no way to proceed.

After trying some of the other more complex advice here, it turned out, to my surprise, that all I needed to do was use "Run as Administrator" when kicking off the installer. I was under the impression MSI generally runs with Admin privileges (under the Trusted Installer service) but I suppose the VS bootstrapper in this case does not.

blocks|key|4530188|text|我也遇到过类似的问题。我的解决方案是关闭杀毒软件(Avast)，下载.iso文件，挂载它(在Windows+Explorer中双击.iso文件)，然后使用管理员权限通过以下开关从PowerShell运行它：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4530189|.\vs_community.exe+/NoWeb+/NoRefresh|4530190|这样，您就不必脱机或删除现有安装。|4530191|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

I had a similar problem. My solution was to switch off the antivirus software (Avast), download the .iso file, mount it (double click in the Windows Explorer on the .iso file), and then run it from the PowerShell with admin rights with the following switches:

.\vs_community.exe /NoWeb /NoRefresh

This way you don't have to go offline or remove your existing installation.

blocks|key|22602|text|好吧，我在任务管理器中找不到任何SecondaryInstaller.exe来停止，甚至我没有任何AV，而不是Windows+Defender，所以我找到了其他的东西..|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22603|我通过编写命令net+stop+muauserv停止了windows+Update的升级命令，它对我很有效……|offset|length|style|CODE|22604|更新将针对KB2664825重试，因此在cmd..中再次运行代码(因为服务会自动启动)|22605|继续尝试，它为我完成了…！！|22606|entityMap^0|0|7|H|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|O|8|@$D|P|E|Q|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|R|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|S|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|T|8|@]|9|@]|A|$]]]|M|$]]

Well, I cant find any SecondaryInstaller.exe to stop in task manager and even I dont have any AV rather then Windows Defender so I found something else.. 
I stopped windows Update from elevated cmd by writing command <code>net stop muauserv</code> and it worked for me... 
The update will Retry again for KB2664825 so run the code again in cmd..(because the service starts automatically)

Keep trying and its done for me...!!

blocks|key|22635|text|对我来说，使用任务管理器强制停止安装服务是有帮助的。如果Visual+Studio是在功能和程序中安装的，则将其卸载，重新启动计算机并尝试再次安装它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22636|开始安装时，请确保具有可靠的互联网连接|22637|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

For me it helped to stop the installation service forcefully using task manager. If Visual Studio was installed in Features &amp; Programs then uninstall it, restart computer and try to install it again.

When starting the installation make sure to be have reliable internet connection

blocks|key|4530266|text|在不同的背景下，我也遇到了同样的问题。在没有解决方案的情况下尝试修复、卸载和重装之后，我决定按照下面链接中的步骤一步一步地使用TotalUninstaller来清除Visual+Studio的所有残留物：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4530267|https://github.com/Microsoft/VisualStudioUninstaller/releases|offset|length|4530268|一旦删除了所有内容，我就可以成功地安装软件了。|4530269|请注意，TotalUninstaller将删除与Visual+Studio2013至2015相关的所有内容。早期版本仍将保留。|4530270|我添加了这个解决方案，以防有人遇到完全相同的问题。|4530271|entityMap|0|LINK|mutability|MUTABLE|url^0|0|0|1P|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@$D|U|E|V|1|W]]|A|$]]|$1|F|3|G|5|6|7|X|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|Z|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|10|8|@]|9|@]|A|$]]]|M|$N|$5|O|P|Q|A|$R|C]]]]

I had the same problem on a different context. After trying to repair, uninstall, and reinstall with no solution, I decided to wipe out all Visual Studio remnant by using TotalUninstaller by follower the steps by steps on the link below:

<a href="https://github.com/Microsoft/VisualStudioUninstaller/releases" rel="nofollow noreferrer">https://github.com/Microsoft/VisualStudioUninstaller/releases</a>

Once everything is removed, I was able to successfully install the software.

Be aware that TotalUninstaller will remove everything related to Visual Studio 2013 to 2015. Earlier version will still be preserved.

I added this solution in case someone has the exact same problem.

blocks|key|22738|text|我也有同样的问题，不幸的是，公认的答案是杀死SecondaryInstaller.exe搞砸了可选项目的安装。我所做的基本上是打开任务管理器，找到SecondaryInstaller.exe，然后右击并单击Open+file+location。然后以管理员身份运行SecondaryInstaller.exe。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|22739|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I've got same problem and unfortunately the accepted answer which suggests killing SecondaryInstaller.exe messed up installing the optional items. What I've done is basically opening the task manager and locate SecondaryInstaller.exe and right click and click on Open file location. Then run SecondaryInstaller.exe as an administrator.

blocks|key|4530302|text|我也有同样的问题，我正在使用Windows10秋季创建者版，当它到达WIN+10SDK_10时，Set在某个时间被卡住了0%25和44%25。文件|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4530303|经过一些研究和进入我的日志文件和任务处理器中的处理器，我发现一些Power+shell处理器正在运行，我只是终止了长时间没有响应的进程，我的设置开始工作并显示进度……就这样|4530304|我不知道它是否适用于你们的人民，但它适用于我的情况。|4530305|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

I had also same issue, I am using Windows 10 Fall creator Edition, Set were getting stuck at some time 0% and some time 44% when it reached WIN 10SDK_10. .. file

After some research and getting into my logs files and processors in task processor i found some Power shell processor were running, I just kill the process which was not responding for long time and my setup get start working and showing progress.... that's it 

I don't Know If it works for your peoples But it works in my case.

blocks|key|4530348|text|有很多答案的老帖子。但对我来说，这些命令解决了问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4530349|regsvr32.exe+/u+"C:\Program+Files+(x86)\Common+Files\microsoft+shared\MSI+Tools\mergemod.dll“|4530350|regsvr32.exe+"C:\Program+Files+(x86)\Common+Files\microsoft+shared\MSI+Tools\mergemod.dll“|4530351|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|I|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|J|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|G|$]]

The old thread with many answers. but for me, these commands solved the problem.

regsvr32.exe /u "C:\Program Files (x86)\Common Files\microsoft shared\MSI Tools\mergemod.dll"

regsvr32.exe "C:\Program Files (x86)\Common Files\microsoft shared\MSI Tools\mergemod.dll"

I downloaded the full ISO for Visual Studio Ultimate CTP 6. The installation program got to about the 90% mark, gauging by the progress bar, and just stuck there. There was frequent activity from Superfetch, Anti-malware protection, and other background processes, but the progress bar was dead still. Eventually the background task activity subsided after 20 minutes, but the progress bar still wouldn't budge.

CHEAP TRICK: Open a notepad window and position the left edge of it so it perfectly marks the current position of the progress bar. If it the progress bar doesn't move past the left edge of the notepad window in about an hour, it's probably stuck.

Visual Studio 2015 installer hangs during install?

Windows Server

Visual Studio

日志文件

Android

Windows

我下载了完整的ISO for Visual Studio Ultimate CTP 6。安装程序达到了90%左右，用进度条来衡量，然后就停在那里了。来自Superfetch、反恶意软件保护和其他后台进程的活动频繁，但进度条仍处于静止状态。最终，后台任务活动在20分钟后平息，但进度条仍然不动。简单的技巧:打开一个记事本窗...

问Visual Studio 2015安装程序在安装过程中挂起吗？
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Visual Studio 2015安装程序在安装过程中挂起吗？EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Visual Studio 2015安装程序在安装过程中挂起吗？
EN