blocks|key|870569|text|如果<TextView>放在LinearLayout中，请将TextView的<和>的Layout_weight属性分别设置为0和1。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|870570|如果您正在使用RelativeLayout，请将<和>左右对齐，并将TextView的"Layout+to+left+of“和"Layout+to+right+of”属性设置为<和>的ids。|870571|entityMap^0|2|A|E|C|U|8|13|1|15|1|17|D|0|7|E|O|1|Q|1|Y|8|2G|1|2I|1|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]|$9|Q|A|R|B|C]|$9|S|A|T|B|C]|$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|W|8|@$9|X|A|Y|B|C]|$9|Z|A|10|B|C]|$9|11|A|12|B|C]|$9|13|A|14|B|C]|$9|15|A|16|B|C]|$9|17|A|18|B|C]]|D|@]|E|$]]|$1|H|3|-4|5|6|7|19|8|@]|D|@]|E|$]]]|I|$]]

<p>If <code>&lt;TextView&gt;</code> is placed in a <code>LinearLayout</code>, set the <code>Layout_weight</code> proprty of <code>&lt;</code> and <code>&gt;</code> to 0 and 1 for the <code>TextView</code>.</p>
<p>If you're using a <code>RelativeLayout</code>, align <code>&lt;</code> and <code>&gt;</code> to the left and right and set &quot;Layout to left of&quot; and &quot;Layout to right of&quot; property of the <code>TextView</code> to the ids of <code>&lt;</code> and <code>&gt;</code>.</p>


blocks|key|653279|text|如果你使用RelativeLayout，你可以这样做：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|653280|<RelativeLayout
++++android:layout_width+=+"fill_parent"
++++android:layout_height+=+"fill_parent">
++++<ImageView
++++++++android:id+=+"@%2Bid/my_image"
++++++++android:layout_width+=+"wrap_content"
++++++++android:layout_height+=+"wrap_content"
++++++++android:layout_alignParentTop+="true"+/>
++++<RelativeLayout
++++++++android:id="@%2Bid/layout_bottom"
++++++++android:layout_width="fill_parent"
++++++++android:layout_height+=+"50dp"
++++++++android:layout_alignParentBottom+=+"true">
++++++++<Button
++++++++++++android:id+=+"@%2Bid/but_left"
++++++++++++android:layout_width+=+"80dp"
++++++++++++android:layout_height+=+"wrap_content"
++++++++++++android:text="&lt;"
++++++++++++android:layout_alignParentLeft+=+"true"/>
++++++++<TextView
++++++++++++android:layout_width+=+"fill_parent"
++++++++++++android:layout_height+=+"wrap_content"
++++++++++++android:layout_toLeftOf+=+"@%2Bid/but_right"
++++++++++++android:layout_toRightOf+=+"@id/but_left"+/>
++++++++<Button
++++++++++++android:id+=+"@id/but_right"
++++++++++++android:layout_width+=+"80dp"
++++++++++++android:layout_height+=+"wrap_content"
++++++++++++android:text="&gt;"
++++++++++++android:layout_alignParentRight+=+"true"/>
++++</RelativeLayout>
</RelativeLayout>|code-block|syntax|javascript|653281|entityMap^0|5|E|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|P|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|L|$]]

<p>If you use <code>RelativeLayout</code>, you can do it something like this:</p>

<pre><code>&lt;RelativeLayout
    android:layout_width = "fill_parent"
    android:layout_height = "fill_parent"&gt;
    &lt;ImageView
        android:id = "@+id/my_image"
        android:layout_width = "wrap_content"
        android:layout_height = "wrap_content"
        android:layout_alignParentTop ="true" /&gt;
    &lt;RelativeLayout
        android:id="@+id/layout_bottom"
        android:layout_width="fill_parent"
        android:layout_height = "50dp"
        android:layout_alignParentBottom = "true"&gt;
        &lt;Button
            android:id = "@+id/but_left"
            android:layout_width = "80dp"
            android:layout_height = "wrap_content"
            android:text="&amp;lt;"
            android:layout_alignParentLeft = "true"/&gt;
        &lt;TextView
            android:layout_width = "fill_parent"
            android:layout_height = "wrap_content"
            android:layout_toLeftOf = "@+id/but_right"
            android:layout_toRightOf = "@id/but_left" /&gt;
        &lt;Button
            android:id = "@id/but_right"
            android:layout_width = "80dp"
            android:layout_height = "wrap_content"
            android:text="&amp;gt;"
            android:layout_alignParentRight = "true"/&gt;
    &lt;/RelativeLayout&gt;
&lt;/RelativeLayout&gt;
</code></pre>


blocks|key|653308|text|设置minWidth或minHeight很简单，这取决于你想要的是水平还是垂直。对于另一个对象(您想填充剩余空间的对象)，您可以将权重设置为1(设置宽度以包装其内容)，这样它将填充剩余的区域。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|653309|<LinearLayout
++++++++android:layout_width="wrap_content"
++++++++android:layout_height="match_parent"
++++++++android:layout_weight="1"
++++++++android:gravity="center%7Cleft"
++++++++android:orientation="vertical"+>
</LinearLayout>
<LinearLayout
++++++++android:layout_width="80dp"
++++++++android:layout_height="fill_parent"
++++++++android:minWidth="80dp"+>
</LinearLayout>|code-block|syntax|javascript|653310|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

<p>It´s simple
You set the minWidth or minHeight, depends on what you are looking for, horizontal or vertical.
And for the other object(the one that you want to fill the remaining space) you set a weight of 1 (set the width to wrap it´s content), So it will fill the rest of area.</p>

<pre><code>&lt;LinearLayout
        android:layout_width="wrap_content"
        android:layout_height="match_parent"
        android:layout_weight="1"
        android:gravity="center|left"
        android:orientation="vertical" &gt;
&lt;/LinearLayout&gt;
&lt;LinearLayout
        android:layout_width="80dp"
        android:layout_height="fill_parent"
        android:minWidth="80dp" &gt;
&lt;/LinearLayout&gt;
</code></pre>


blocks|key|653358|text|woodshy的答案对我很有效，而且它比Ungureanu+Liviu的答案更简单，因为它没有使用RelativeLayout。为了清楚起见，我给出了我的布局：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|653359|<LinearLayout+
++++++android:layout_width="fill_parent"
++++++android:layout_height="wrap_content"
++++++android:orientation="horizontal"
++++++>

+++++<Button
++++++++android:layout_width+=+"80dp"
++++++++android:layout_weight+=+"0"
++++++++android:layout_height+=+"wrap_content"
++++++++android:text="&lt;"/>
+++++<TextView
++++++++android:layout_width+=+"fill_parent"
++++++++android:layout_height+=+"wrap_content"
++++++++android:layout_weight+=+"1"/>
+++++<Button
++++++++android:layout_width+=+"80dp"
++++++++android:layout_weight+=+"0"
++++++++android:layout_height+=+"wrap_content"
++++++++android:text="&gt;"/>+++
+</LinearLayout>|code-block|syntax|javascript|653360|entityMap^0|1D|E|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|P|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|L|$]]

<p>Answer from woodshy worked for me, and it is simpler than the answer by Ungureanu Liviu since it does not use <code>RelativeLayout</code>.
I am giving my layout for clarity:</p>

<pre><code>&lt;LinearLayout 
      android:layout_width="fill_parent"
      android:layout_height="wrap_content"
      android:orientation="horizontal"
      &gt;

     &lt;Button
        android:layout_width = "80dp"
        android:layout_weight = "0"
        android:layout_height = "wrap_content"
        android:text="&amp;lt;"/&gt;
     &lt;TextView
        android:layout_width = "fill_parent"
        android:layout_height = "wrap_content"
        android:layout_weight = "1"/&gt;
     &lt;Button
        android:layout_width = "80dp"
        android:layout_weight = "0"
        android:layout_height = "wrap_content"
        android:text="&amp;gt;"/&gt;   
 &lt;/LinearLayout&gt;
</code></pre>


blocks|key|870746|text|对于那些和我一样有<LinearLayout...>问题的人：|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|870747|指定android:layout_width="fill_parent"很重要，因为它不能与wrap_content一起工作。|870748|OTOH，您可以省略android:layout_weight+=+"0"，这不是必需的。|870749|我的代码与https://stackoverflow.com/a/25781167/755804中的代码基本相同(+Vivek+Pandey编写)|870750|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/a/25781167/755804^0|9|H|0|2|Y|1A|C|0|A|R|0|5|17|0|0^^$0|@$1|2|3|4|5|6|7|T|8|@$9|U|A|V|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|W|8|@$9|X|A|Y|B|C]|$9|Z|A|10|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|11|8|@$9|12|A|13|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|14|8|@]|D|@$9|15|A|16|1|17]]|E|$]]|$1|L|3|-4|5|6|7|18|8|@]|D|@]|E|$]]]|M|$N|$5|O|P|Q|E|$R|S]]]]

<p>For those having the same glitch with <code>&lt;LinearLayout...&gt;</code> as I did:</p>

<p>It is important to specify <code>android:layout_width="fill_parent"</code>, it will not work with <code>wrap_content</code>.</p>

<p>OTOH, you may omit <code>android:layout_weight = "0"</code>, it is not required.</p>

<p>My code is basically the same as the code in <a href="https://stackoverflow.com/a/25781167/755804">https://stackoverflow.com/a/25781167/755804</a> (by Vivek Pandey)</p>


blocks|key|653454|text|您可以使用高layout_weight属性。下面你可以看到一个布局，ListView占用所有可用空间，底部有按钮：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|653455|<LinearLayout+xmlns:android="http://schemas.android.com/apk/res/android"
++++xmlns:tools="http://schemas.android.com/tools"
++++android:layout_width="fill_parent"
++++android:layout_height="fill_parent"
++++tools:context=".ConfigurationActivity"
++++android:orientation="vertical"
++++>

++++++++<ListView
++++++++++++android:id="@%2Bid/listView"
++++++++++++android:layout_width="fill_parent"
++++++++++++android:layout_height="fill_parent"
++++++++++++android:layout_weight="1000"
++++++++++++/>


++++++++<Button
++++++++++++android:id="@%2Bid/btnCreateNewRule"
++++++++++++android:layout_width="fill_parent"
++++++++++++android:layout_height="wrap_content"
++++++++++++android:layout_weight="1"
++++++++++++android:text="Create+New+Rule"+/>



++++++++<Button
++++++++++++android:id="@%2Bid/btnConfigureOk"
++++++++++++android:layout_width="fill_parent"
++++++++++++android:layout_height="wrap_content"
++++++++++++android:layout_weight="1"
++++++++++++android:text="Ok"+/>


</LinearLayout>|code-block|syntax|javascript|653456|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

<p>you can use high layout_weight attribute. Below you can see a layout where ListView takes all free space with buttons at bottom:</p>

<pre><code>&lt;LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
    xmlns:tools="http://schemas.android.com/tools"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent"
    tools:context=".ConfigurationActivity"
    android:orientation="vertical"
    &gt;

        &lt;ListView
            android:id="@+id/listView"
            android:layout_width="fill_parent"
            android:layout_height="fill_parent"
            android:layout_weight="1000"
            /&gt;


        &lt;Button
            android:id="@+id/btnCreateNewRule"
            android:layout_width="fill_parent"
            android:layout_height="wrap_content"
            android:layout_weight="1"
            android:text="Create New Rule" /&gt;



        &lt;Button
            android:id="@+id/btnConfigureOk"
            android:layout_width="fill_parent"
            android:layout_height="wrap_content"
            android:layout_weight="1"
            android:text="Ok" /&gt;


&lt;/LinearLayout&gt;
</code></pre>


blocks|key|870824|text|你应该避免嵌套2个相对布局，因为相对布局总是对绘图进行2次遍历(而对于任何其他类型的布局都是1次)。当你嵌套它们时，它会变成指数级的。您应该在要填充剩余空间的元素上使用width=0和weight=1的线性布局。对于性能和实践来说，这个答案更好。记住:只有在别无选择的情况下才使用相对布局。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|870825|<?xml+version="1.0"+encoding="utf-8"?>
<LinearLayout+xmlns:android="http://schemas.android.com/apk/res/android"
++++++++++android:layout_width="match_parent"
++++++++++android:layout_height="match_parent"
++++++++++android:orientation="vertical">

++++<ImageView
++++++++android:id="@%2Bid/imageview"
++++++++android:layout_width="wrap_content"
++++++++android:layout_height="wrap_content"+/>

++++<LinearLayout
++++++++android:layout_width="match_parent"
++++++++android:layout_height="50dp"
++++++++android:orientation="horizontal">

++++++++<Button
++++++++++++android:id="@%2Bid/prev_button"
++++++++++++android:layout_width="80dp"
++++++++++++android:layout_height="wrap_content"
++++++++++++android:text="&lt;"+/>

++++++++<TextView
++++++++++++android:layout_width="0dp"
++++++++++++android:layout_height="wrap_content"
++++++++++++android:layout_weight="1"
++++++++++++android:ellipsize="end"
++++++++++++android:singleLine="true"
++++++++++++android:gravity="center"
++++++++++++android:text="TextView"+/>

++++++++<Button
++++++++++++android:id="@%2Bid/next_button"
++++++++++++android:layout_width="80dp"
++++++++++++android:layout_height="wrap_content"
++++++++++++android:text="&gt;"+/>
++++</LinearLayout>
</LinearLayout>|code-block|syntax|javascript|870826|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

<p>You should avoid nesting 2 relative layout since relative layout always make 2 pass for drawing (against 1 for any other type of layout). It becomes exponential when you nest them. You should use linear layout with width=0 and weight=1 on the element you want to fill the space left.
This answer is better for performance and the practices. Remember: use relative layout ONLY when you don't have other choice.</p>

<pre><code>&lt;?xml version="1.0" encoding="utf-8"?&gt;
&lt;LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
          android:layout_width="match_parent"
          android:layout_height="match_parent"
          android:orientation="vertical"&gt;

    &lt;ImageView
        android:id="@+id/imageview"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content" /&gt;

    &lt;LinearLayout
        android:layout_width="match_parent"
        android:layout_height="50dp"
        android:orientation="horizontal"&gt;

        &lt;Button
            android:id="@+id/prev_button"
            android:layout_width="80dp"
            android:layout_height="wrap_content"
            android:text="&amp;lt;" /&gt;

        &lt;TextView
            android:layout_width="0dp"
            android:layout_height="wrap_content"
            android:layout_weight="1"
            android:ellipsize="end"
            android:singleLine="true"
            android:gravity="center"
            android:text="TextView" /&gt;

        &lt;Button
            android:id="@+id/next_button"
            android:layout_width="80dp"
            android:layout_height="wrap_content"
            android:text="&amp;gt;" /&gt;
    &lt;/LinearLayout&gt;
&lt;/LinearLayout&gt;
</code></pre>


blocks|key|653533|text|可以使用将layout_width或layout_width设置为0dp+(按要填充剩余空间的方向)。然后使用layout_weight填充剩余空间。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|653534|entityMap^0|5|C|I|C|X|3|1J|D|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|G|$]]

<p>You can use set the <code>layout_width</code> or <code>layout_width</code> to <code>0dp</code> (By the orientation you want to fill remaining space).
Then use the <code>layout_weight</code> to make it fill remaining space.</p>


blocks|key|870923|text|使用Relativelayout包装LinearLayout|type|unstyled|depth|inlineStyleRanges|entityRanges|data|870924|<RelativeLayout+xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:round="http://schemas.android.com/apk/res-auto"
xmlns:app="http://schemas.android.com/apk/res-auto"
android:layout_width="match_parent"
android:layout_height="match_parent">
<LinearLayout
android:layout_width="fill_parent"
android:layout_height="match_parent"
android:orientation="vertical">
++++<Button
++++++++android:layout_width+=+"wrap_content"
++++++++android:layout_height+=+"wrap_content"
++++++++android:text="&lt;"/>
++++<TextView
++++++++android:layout_width+=+"fill_parent"
++++++++android:layout_height+=+"wrap_content"
++++++++android:layout_weight+=+"1"/>
++++<Button
++++++++android:layout_width+=+"wrap_content"
++++++++android:layout_height+=+"wrap_content"
++++++++android:text="&gt;"/>

</LinearLayout>

</RelativeLayout>`|code-block|syntax|javascript|870925|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

<p>use a Relativelayout to wrap LinearLayout</p>

<pre><code>&lt;RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:round="http://schemas.android.com/apk/res-auto"
xmlns:app="http://schemas.android.com/apk/res-auto"
android:layout_width="match_parent"
android:layout_height="match_parent"&gt;
&lt;LinearLayout
android:layout_width="fill_parent"
android:layout_height="match_parent"
android:orientation="vertical"&gt;
    &lt;Button
        android:layout_width = "wrap_content"
        android:layout_height = "wrap_content"
        android:text="&amp;lt;"/&gt;
    &lt;TextView
        android:layout_width = "fill_parent"
        android:layout_height = "wrap_content"
        android:layout_weight = "1"/&gt;
    &lt;Button
        android:layout_width = "wrap_content"
        android:layout_height = "wrap_content"
        android:text="&amp;gt;"/&gt;

&lt;/LinearLayout&gt;

&lt;/RelativeLayout&gt;`
</code></pre>


blocks|key|653621|text|使用ConstraintLayout，我找到了类似于|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|653622|<Button
++++android:id="@%2Bid/left_button"
++++android:layout_width="80dp"
++++android:layout_height="48dp"
++++android:text="&lt;"
++++app:layout_constraintBottom_toBottomOf="parent"
++++app:layout_constraintLeft_toLeftOf="parent"
++++app:layout_constraintTop_toTopOf="parent"+/>

<TextView
++++android:layout_width="0dp"
++++android:layout_height="0dp"
++++app:layout_constraintBottom_toBottomOf="parent"
++++app:layout_constraintLeft_toRightOf="@%2Bid/left_button"
++++app:layout_constraintRight_toLeftOf="@%2Bid/right_button"
++++app:layout_constraintTop_toTopOf="parent"+/>

<Button
++++android:id="@%2Bid/right_button"
++++android:layout_width="80dp"
++++android:layout_height="48dp"
++++android:text="&gt;"
++++app:layout_constraintBottom_toBottomOf="parent"
++++app:layout_constraintRight_toRightOf="parent"
++++app:layout_constraintTop_toTopOf="parent"+/>|code-block|syntax|javascript|653623|​|653624|很管用。关键是适当地设置右边缘、左边缘、上边缘和下边缘约束，然后将宽度和高度设置为0dp，并让它确定自己的大小。|653625|entityMap^0|2|G|0|0|0|15|3|0^^$0|@$1|2|3|4|5|6|7|Q|8|@$9|R|A|S|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|T|8|@]|D|@]|E|$I|J]]|$1|K|3|L|5|6|7|U|8|@]|D|@]|E|$]]|$1|M|3|N|5|6|7|V|8|@$9|W|A|X|B|C]]|D|@]|E|$]]|$1|O|3|-4|5|6|7|Y|8|@]|D|@]|E|$]]]|P|$]]

<p>Using a <code>ConstraintLayout</code>, I've found something like

</p>

<pre><code>&lt;Button
    android:id="@+id/left_button"
    android:layout_width="80dp"
    android:layout_height="48dp"
    android:text="&amp;lt;"
    app:layout_constraintBottom_toBottomOf="parent"
    app:layout_constraintLeft_toLeftOf="parent"
    app:layout_constraintTop_toTopOf="parent" /&gt;

&lt;TextView
    android:layout_width="0dp"
    android:layout_height="0dp"
    app:layout_constraintBottom_toBottomOf="parent"
    app:layout_constraintLeft_toRightOf="@+id/left_button"
    app:layout_constraintRight_toLeftOf="@+id/right_button"
    app:layout_constraintTop_toTopOf="parent" /&gt;

&lt;Button
    android:id="@+id/right_button"
    android:layout_width="80dp"
    android:layout_height="48dp"
    android:text="&amp;gt;"
    app:layout_constraintBottom_toBottomOf="parent"
    app:layout_constraintRight_toRightOf="parent"
    app:layout_constraintTop_toTopOf="parent" /&gt;
</code></pre>

<p></p>

<p>works. The key is setting the right, left, top, and bottom edge constraints appropriately, then setting the width and height to <code>0dp</code> and letting it figure out it's own size.</p>


blocks|key|653641|text|我发现|type|unstyled|depth|inlineStyleRanges|entityRanges|data|653642|+<TextView
++++++++android:layout_width="wrap_content"
++++++++android:layout_height="match_parent"
++++++++android:layout_marginEnd="10dp"
++++++++android:fontFamily="casual"
++++++++android:text="(By+Zeus+B0t)"
+++++``+++android:textSize="10sp"
++++++++android:gravity="bottom"
++++++++android:textStyle="italic"+/>|code-block|syntax|javascript|653643|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

<p>i found</p>

<pre><code> &lt;TextView
        android:layout_width="wrap_content"
        android:layout_height="match_parent"
        android:layout_marginEnd="10dp"
        android:fontFamily="casual"
        android:text="(By Zeus B0t)"
     ``   android:textSize="10sp"
        android:gravity="bottom"
        android:textStyle="italic" /&gt;
</code></pre>


blocks|key|871039|text|当使用相对布局时，您可以通过将视图锚定到它应该向其延伸的两个视图来使其拉伸。虽然指定的高度会被忽略，但Android仍然需要一个height属性，这就是我写"0dp“的原因。示例：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|871040|<View
++++android:id="@%2Bid/topView"
++++android:layout_width="match_parent"
++++android:layout_height="40dp"
++++android:layout_alignParentTop="true"
++++android:layout_marginTop="8dp"/>

<View
++++android:id="@%2Bid/stretchableView"
++++android:layout_width="match_parent"
++++android:layout_height="0dp"
++++android:layout_below="@id/topView"
++++android:layout_above="@%2Bid/bottomView"
++++android:layout_marginTop="8dp"
++++android:layout_marginBottom="8dp"
++++android:adjustViewBounds="true"/>

<View
++++android:id="@id/bottomView"
++++android:layout_width="wrap_content"
++++android:layout_height="40dp"
++++android:layout_alignParentBottom="true"
++++android:layout_marginBottom="16dp"/>|code-block|syntax|javascript|871041|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

<p>When using a relative layout, you can make a view stretch by anchoring it to both of the views it's supposed to stretch toward. Although the specified height will be disregarded, Android still requires a height attribute, which is why I wrote "0dp". Example:</p>

<pre><code>&lt;View
    android:id="@+id/topView"
    android:layout_width="match_parent"
    android:layout_height="40dp"
    android:layout_alignParentTop="true"
    android:layout_marginTop="8dp"/&gt;

&lt;View
    android:id="@+id/stretchableView"
    android:layout_width="match_parent"
    android:layout_height="0dp"
    android:layout_below="@id/topView"
    android:layout_above="@+id/bottomView"
    android:layout_marginTop="8dp"
    android:layout_marginBottom="8dp"
    android:adjustViewBounds="true"/&gt;

&lt;View
    android:id="@id/bottomView"
    android:layout_width="wrap_content"
    android:layout_height="40dp"
    android:layout_alignParentBottom="true"
    android:layout_marginBottom="16dp"/&gt;
</code></pre>


<p>I'm designing my application UI. I need a layout looks like this:</p>

<p><img src="https://i.stack.imgur.com/t5Ulu.png" alt="Example of desired layout"></p>

<p>(&lt; and > are Buttons). The problem is, I don't know how to make sure the TextView will fill the remaining space, with two buttons have fixed size.</p>

<p>If I use fill_parent for Text View, the second button (>) can't be shown.</p>

<p>How can I craft a layout that looks like the image?</p>


How to make layout with View fill the remaining space?

Android

我正在设计我的应用程序UI。我需要一个像这样的布局：​​(<和>是按钮)。问题是，我不知道如何确保TextView会填满剩余的空间，因为有两个按钮的大小是固定的。如果我使用fill_parent显示文本视图，第二个按钮(>)不能显示。我如何制作一个看起来像图像的布局？

问如何让视图布局填充剩余空间？
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何让视图布局填充剩余空间？EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何让视图布局填充剩余空间？
EN