blocks|key|361225|text|存在this+post+-不确定它是在解决方案中出现第一个错误还是第一个失败的项目时停止构建。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|361226|Ctrl-break也会手动停止它。|361227|现在，如果有什么方法可以阻止它在构建失败后花费10分钟来重建智能感知！|361228|entityMap|0|LINK|mutability|MUTABLE|url|http://old.stevenharman.net/blog/archive/2008/01/17/visual-studio-tip-kill-that-build.aspx^0|2|9|0|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@$A|Q|B|R|1|S]]|C|$]]|$1|D|3|E|5|6|7|T|8|@]|9|@]|C|$]]|$1|F|3|G|5|6|7|U|8|@]|9|@]|C|$]]|$1|H|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]]]

There is <a href="http://old.stevenharman.net/blog/archive/2008/01/17/visual-studio-tip-kill-that-build.aspx" rel="nofollow noreferrer">this post</a> - not sure if it stops the build at the first error or the first failed project in a solution.

Ctrl-break will also stop it manually.

Now if there was some way to stop it spending 10mins rebuilding intelisense after a build failed!

blocks|key|3154037|text|这可以通过添加为响应event+OnBuildProjConfigDone而运行的宏来完成。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3154038|宏如下所示：|3154039|Private+Sub+BuildEvents_OnBuildProjConfigDone(ByVal+Project+As+String,+ByVal+ProjectConfig+As+String,+ByVal+Platform+As+String,+ByVal+SolutionConfig+As+String,+ByVal+Success+As+Boolean)+Handles+BuildEvents.OnBuildProjConfigDone

++If+Success+=+False+Then
++++DTE.ExecuteCommand("Build.Cancel")
++End+If

End+Sub|code-block|syntax|javascript|3154040|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

This can be done by adding a macro that is run in response to the event OnBuildProjConfigDone.

The macro is as follows:

<pre><code>Private Sub BuildEvents_OnBuildProjConfigDone(ByVal Project As String, ByVal ProjectConfig As String, ByVal Platform As String, ByVal SolutionConfig As String, ByVal Success As Boolean) Handles BuildEvents.OnBuildProjConfigDone

 If Success = False Then
 DTE.ExecuteCommand("Build.Cancel")
 End If

End Sub
</code></pre>

blocks|key|3367096|text|我想出了一个更好的宏观家伙。它在出现第一个错误后立即停止(构建窗口更新后立即停止)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3367097|Visual+Studio+->工具->宏->宏集成开发环境...(或ALT%2BF11)|3367098|Private+Sub+OutputWindowEvents_OnPaneUpdated(ByVal+pPane+As+OutputWindowPane)+Handles+OutputWindowEvents.PaneUpdated
++++If+Not+(pPane.Name+=+"Build")+Then+Exit+Sub

++++pPane.TextDocument.Selection.SelectAll()
++++Dim+Context+As+String+=+pPane.TextDocument.Selection.Text
++++pPane.TextDocument.Selection.EndOfDocument()

++++Dim+found+As+Integer+=+Context.IndexOf(":+error+")

++++If+found+>+0+Then
++++++++DTE.ExecuteCommand("Build.Cancel")
++++End+If

End+Sub+|code-block|syntax|javascript|3367099|希望你们能行得通。|3367100|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

I came up with a better macro guys. It stops immediately after the first error/s (soon as build window is updated).

Visual Studio -> Tools -> Macros -> Macro IDE... (or ALT+F11)

<pre><code>Private Sub OutputWindowEvents_OnPaneUpdated(ByVal pPane As OutputWindowPane) Handles OutputWindowEvents.PaneUpdated
 If Not (pPane.Name = "Build") Then Exit Sub

 pPane.TextDocument.Selection.SelectAll()
 Dim Context As String = pPane.TextDocument.Selection.Text
 pPane.TextDocument.Selection.EndOfDocument()

 Dim found As Integer = Context.IndexOf(": error ")

 If found &gt; 0 Then
 DTE.ExecuteCommand("Build.Cancel")
 End If

End Sub 
</code></pre>

Hope it works out for you guys.

blocks|key|3367106|text|是的，这在MSVC+2005-2010上运行得很好：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3367107|Public+Module+EnvironmentEvents
++Private+Sub+OutputWindowEvents_OnPaneUpdated(ByVal+pPane+As+OutputWindowPane)+Handles+OutputWindowEvents.PaneUpdated
++++If+Not+(pPane.Name+=+"Build")+Then+Exit+Sub

++++Dim+foundError+As+Boolean+=+pPane.TextDocument.StartPoint.CreateEditPoint().FindPattern(":+error")
++++Dim+foundFatal+As+Boolean+=+pPane.TextDocument.StartPoint.CreateEditPoint().FindPattern(":+fatal+error")

++++If+foundError+Or+foundFatal+Then
++++++DTE.ExecuteCommand("Build.Cancel")
++++End+If
++End+Sub
End+Module|code-block|syntax|javascript|3367108|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Yeah, this works fine on MSVC 2005-2010:

<pre><code>Public Module EnvironmentEvents
 Private Sub OutputWindowEvents_OnPaneUpdated(ByVal pPane As OutputWindowPane) Handles OutputWindowEvents.PaneUpdated
 If Not (pPane.Name = "Build") Then Exit Sub

 Dim foundError As Boolean = pPane.TextDocument.StartPoint.CreateEditPoint().FindPattern(": error")
 Dim foundFatal As Boolean = pPane.TextDocument.StartPoint.CreateEditPoint().FindPattern(": fatal error")

 If foundError Or foundFatal Then
 DTE.ExecuteCommand("Build.Cancel")
 End If
 End Sub
End Module
</code></pre>

blocks|key|366009|text|我知道这个问题是针对VS2008的，但在搜索VS2012同样的答案时，我偶然发现了这个问题。由于2012年不再支持宏，宏解决方案将不再有效。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|366010|你可以下载一个可以在VS2010和2012+here中使用的扩展。我可以确认它在VS2012中运行良好。|offset|length|366011|this+response中给出了扩展的原始链接。|366012|entityMap|0|LINK|mutability|MUTABLE|url|http://visualstudiogallery.msdn.microsoft.com/92a14c1d-82ce-409d-8e16-3f2aac0a00ea|1|https://stackoverflow.com/a/3042159/2396122^0|0|M|4|0|0|0|4|1|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@$D|T|E|U|1|V]]|A|$]]|$1|F|3|G|5|6|7|W|8|@]|9|@$D|X|E|Y|1|Z]]|A|$]]|$1|H|3|-4|5|6|7|10|8|@]|9|@]|A|$]]]|I|$J|$5|K|L|M|A|$N|O]]|P|$5|K|L|M|A|$N|Q]]]]

I know the question was for VS 2008, but I stumbled across it when searching for the same answer for VS 2012. Since macros are no longer supported in 2012, macro solutions won't work anymore.

You can download an extension that apparently works in VS 2010 and 2012 <a href="http://visualstudiogallery.msdn.microsoft.com/92a14c1d-82ce-409d-8e16-3f2aac0a00ea" rel="nofollow noreferrer">here</a>. I can confirm that it works well in VS 2012.

The original link to the extension was given in <a href="https://stackoverflow.com/a/3042159/2396122">this</a> response.

blocks|key|3367131|text|你也可以下载this扩展，似乎适用于Visual+Studio的每个版本|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|3367132|entityMap|0|LINK|mutability|MUTABLE|url|https://visualstudiogallery.msdn.microsoft.com/91aaa139-5d3c-43a7-b39f-369196a84fa5^0|6|4|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

You can also download <a href="https://visualstudiogallery.msdn.microsoft.com/91aaa139-5d3c-43a7-b39f-369196a84fa5" rel="nofollow">this</a> extension, seems to work for every version of Visual Studio

I know I can compile individual source files, but sometimes -- say, when editing a header file used by many <code>.cpp</code> files -- multiple source files need to be recompiled. That's what Build is for.

Default behavior of the "Build" command in VC9 (Visual C++ 2008) is to attempt to compile all files that need it. Sometimes this just results in many failed compiles. I usually just watch for errors and hit ctrl-break to stop the build manually.

Is there a way to configure it such the build stops at the very first compile error (not the first failed project build) automatically?

Automatically stop Visual C++ 2008 build at first compile error?

集成开发环境

Visual Studio

我知道我可以编译单个源文件，但有时--比方说，在编辑许多.cpp文件使用的头文件时--需要重新编译多个源文件。这就是构建的目的。在VC9 (Visual C++ 2008)中，"Build“命令的默认行为是尝试编译所有需要它的文件。有时，这只会导致许多编译失败。我通常只是观察错误，然后按ctrl-break手动停止构建...

问在第一次编译时自动停止Visual C++ 2008生成错误？
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在第一次编译时自动停止Visual C++ 2008生成错误？EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问在第一次编译时自动停止Visual C++ 2008生成错误？
EN