blocks|key|85761|text|你所做的一切都是好的。但是，在创建用于身份验证的OAuth令牌时，请确保定义了正确的scopes。每个作用域都定义了一组特定的允许操作(可以读/写的信息)，因此您应该检查是否正在使用repo作用域创建令牌。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|85762|entityMap|0|LINK|mutability|MUTABLE|url|http://developer.github.com/v3/oauth/#scopes^0|2J|4|16|6|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@$9|O|A|P|B|C]]|D|@$9|Q|A|R|1|S]]|E|$]]|$1|F|3|-4|5|6|7|T|8|@]|D|@]|E|$]]]|G|$H|$5|I|J|K|E|$L|M]]]]

Everything you are doing is OK. However, when creating OAuth tokens for authentication, be sure that you are defining the right <a href="http://developer.github.com/v3/oauth/#scopes" rel="noreferrer">scopes</a>. Each scope defines a specific set of permitted actions (information you can read/write), so you should check that you are creating the token with the <code>repo</code> scope.

blocks|key|85773|text|你的网址需要一个？而不是&。应该是这样的：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|85774|https://api.github.com/orgs/acme/repos?access_token=your_access_token|offset|length|85775|entityMap|0|LINK|mutability|MUTABLE|url^0|0|0|1X|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@$D|O|E|P|1|Q]]|A|$]]|$1|F|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|C]]]]

Your url needs a ? not an &amp;. It should be this:

<a href="https://api.github.com/orgs/acme/repos?access_token=your_access_token" rel="noreferrer">https://api.github.com/orgs/acme/repos?access_token=your_access_token</a>

blocks|key|85779|text|username+=+"Your_org"
token+=+"your_TOKEN"
request+=+requests.get('https://api.github.com/orgs/'%2Busername%2B'/repos?per_page=1000',+auth=(username,+token))|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|85780|unstyled|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$B|C]]|$1|D|3|-4|5|E|7|H|8|@]|9|@]|A|$]]]|F|$]]

<pre><code>username = &quot;Your_org&quot;
token = &quot;your_TOKEN&quot;
request = requests.get('https://api.github.com/orgs/'+username+'/repos?per_page=1000', auth=(username, token))
</code></pre>

blocks|key|85794|text|#+Get+Github+Repo+Names

"""
>>>>+pip+install+PyGithub
>>>>+Reference+Link:+https://pypi.org/project/PyGithub/
>>>>+Getting+the+access+token.
++++++++Go+to+github+<settings>.
++++++++Go+to+<Developer+Settings>.
++++++++Go+to+<Personal+access+tokens>.
++++++++Click+on+<Generate+new+token>+button.
++++++++Add+a+note.
++++++++Check+all+the+setting+in+that+page.
++++++++Click+on+<Generate+token>+button.
++++++++Copy++the+access+token+and+paste+in+below+code.

>>>>
>>>>
>>>>
>>>>
"""

from+github+import+Github

access_token+=+''
g+=+Github(access_token)
repo_list+=+[i+for+i+in+g.get_user().get_repos()]
for+i+in+repo_list:
++++repo_name+=+str(i).replace('Repository(full_name="',+'')
++++repo_name+=+str(repo_name).replace('")',+'')
++++print('https://www.github.com/'+%2B+repo_name)|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|85795|unstyled|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$B|C]]|$1|D|3|-4|5|E|7|H|8|@]|9|@]|A|$]]]|F|$]]

<pre class="lang-py prettyprint-override"><code># Get Github Repo Names

&quot;&quot;&quot;
&gt;&gt;&gt;&gt; pip install PyGithub
&gt;&gt;&gt;&gt; Reference Link: https://pypi.org/project/PyGithub/
&gt;&gt;&gt;&gt; Getting the access token.
 Go to github &lt;settings&gt;.
 Go to &lt;Developer Settings&gt;.
 Go to &lt;Personal access tokens&gt;.
 Click on &lt;Generate new token&gt; button.
 Add a note.
 Check all the setting in that page.
 Click on &lt;Generate token&gt; button.
 Copy the access token and paste in below code.

&gt;&gt;&gt;&gt;
&gt;&gt;&gt;&gt;
&gt;&gt;&gt;&gt;
&gt;&gt;&gt;&gt;
&quot;&quot;&quot;

from github import Github

access_token = ''
g = Github(access_token)
repo_list = [i for i in g.get_user().get_repos()]
for i in repo_list:
 repo_name = str(i).replace('Repository(full_name=&quot;', '')
 repo_name = str(repo_name).replace('&quot;)', '')
 print('https://www.github.com/' + repo_name)
</code></pre>

blocks|key|85834|text|我最近也有同样的症状，但我的病因不同。我注册了一个GitHub应用程序，而不是OAuth应用程序，并没有真正意识到其中的区别。要让GitHub应用程序列出来自某个组织的私人回购，必须为该组织安装该应用程序，并获得用户的授权。否则，您只需列出公共repos。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|85835|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I've recently had the same symptoms but my cause was different. I'd registered a GitHub App, not an OAuth App, without really being aware of the difference. For a GitHub App to list private repos from an organisation, the app has to be installed for that organisation, as well as being authorised by the user. Otherwise, you just get the public repos listed.

blocks|key|303186|text|您可以使用gh命令https://cli.github.com/|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|303187|gh+repo+list+<org+name>+-L+<total+number+of+repos>+--json+sshUrl+-q+.[].sshUrl|style|CODE|303188|要查看json字段列表，请运行gh+repo+list+--json+help。如果您只想查看公共或私有repos，那么您可以使用这些标志|303189|FLAGS
++++++--archived++++++++++Show+only+archived+repositories
++++++--no-archived+++++++Omit+archived+repositories
++++++--private+++++++++++Show+only+private+repositories
++++++--public++++++++++++Show+only+public+repositories|code-block|syntax|javascript|303190|entityMap|0|LINK|mutability|MUTABLE|url|https://cli.github.com/^0|9|N|0|0|0|26|0|F|O|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@$A|X|B|Y|1|Z]]|C|$]]|$1|D|3|E|5|6|7|10|8|@$A|11|B|12|F|G]]|9|@]|C|$]]|$1|H|3|I|5|6|7|13|8|@$A|14|B|15|F|G]]|9|@]|C|$]]|$1|J|3|K|5|L|7|16|8|@]|9|@]|C|$M|N]]|$1|O|3|-4|5|6|7|17|8|@]|9|@]|C|$]]]|P|$Q|$5|R|S|T|C|$U|V]]]]

You can use the gh command <a href="https://cli.github.com/" rel="nofollow noreferrer">https://cli.github.com/</a>
<code>gh repo list &lt;org name&gt; -L &lt;total number of repos&gt; --json sshUrl -q .[].sshUrl</code>
To see the list of json fields run <code>gh repo list --json help</code>.
If you only want to see public or private repos then you can use these flags
<pre><code>FLAGS
 --archived Show only archived repositories
 --no-archived Omit archived repositories
 --private Show only private repositories
 --public Show only public repositories
</code></pre>

I'm trying to get a list of an organization's all repositories, including private ones. (Or to be more specific, all of the private repositories a certain user has access to.)

Reqesting info for the organization (<code>https://api.github.com/orgs/acme?access_token=[...]</code>) shows that there indeed are plenty of private repositories:

<pre><code>...
"public_repos": 5,
"total_private_repos": 68, 
"owned_private_repos": 68, 
...
</code></pre>

(The access token I'm using had been previously <a href="http://developer.github.com/v3/oauth/#create-a-new-authorization">generated using the API</a> for username/passwd.)

But whatever I try to list the repos...

<pre><code>https://api.github.com/orgs/acme/repos&amp;access_token=[...] 
</code></pre>

...GitHub API just returns the 5 public repositories. (<a href="http://developer.github.com/v3/repos/#list-organization-repositories">Documentation says</a> <code>type=all</code> is default. Also tried adding the parameter <code>type=private</code>; no difference.)

Any idea what I'm doing wrong?

The user to whom the access token was generated in fact has Push &amp; Pull access to just some of the organization's private repositories, but none of those appear in the list I get (just the 5 public repositories).

How to list organization's private repositories via GitHub API?

身份验证

GitHub

OAuth

我正在尝试获取一个组织的所有存储库的列表，包括私有存储库。(或者更具体地说，是指某个用户有权访问的所有私有存储库。)该组织(https://api.github.com/orgs/acme?access_token=[...])的请求信息显示，确实有大量的私有存储库：..."public_repos": 5,"tota...

问如何通过GitHub接口列出组织的私有仓库？
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何通过GitHub接口列出组织的私有仓库？EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何通过GitHub接口列出组织的私有仓库？
EN