blocks|key|4415764|text|从www.lfd.uci.edu/~gohlke/pythonlibs重新安装numpy-1.11.0XXX.whl(适用于您的Python)。这个文件的名字和版本和我之前下载的版本是一样的，但是它的大小和内容不同于旧的版本。重新安装后错误消失。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4415765|第二种选择-从0.17.1返回到scipy+0.17.0|4415766|附注:我使用的是Windows+64位版本的Python+3.5.1，所以不能保证Python+2.7的numpy已经被更正。|4415767|entityMap|0|LINK|mutability|MUTABLE|url|http://www.lfd.uci.edu/~gohlke/pythonlibs^0|1|Y|0|0|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@$A|Q|B|R|1|S]]|C|$]]|$1|D|3|E|5|6|7|T|8|@]|9|@]|C|$]]|$1|F|3|G|5|6|7|U|8|@]|9|@]|C|$]]|$1|H|3|-4|5|6|7|V|8|@]|9|@]|C|$]]]|I|$J|$5|K|L|M|C|$N|O]]]]

Reinstall numpy-1.11.0_XXX.whl (for your Python) from <a href="http://www.lfd.uci.edu/~gohlke/pythonlibs">www.lfd.uci.edu/~gohlke/pythonlibs</a>. This file has the same name and version if compare with the variant downloaded by me earlier 29.03.2016, but its size and content differ from old variant. After re-installation error disappeared.

Second option - return back to scipy 0.17.0 from 0.17.1

P.S. I use Windows 64-bit version of Python 3.5.1, so can't guarantee that numpy for Python 2.7 is already corrected.

blocks|key|4415816|text|我不确定这是否是一个好的解决方案，但它消除了错误。我注释掉了这一行：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4415817|from+numpy._distributor_init+import+NUMPY_MKL+|code-block|syntax|javascript|4415818|而且它起作用了。不确定这是否会导致其他功能中断|4415819|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I'm not sure if this is a good solution but it removed the error. 
I commented out the line: 

<pre><code>from numpy._distributor_init import NUMPY_MKL 
</code></pre>

and it worked. Not sure if this will cause other features to break though

blocks|key|4415859|text|我在windows上安装gensim时也遇到了同样的问题。Gensim依赖于scipy，scipy依赖于numpy。让这三项工作都完成是一件痛苦的事情。我花了很长时间才能让所有这些东西同时工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4415860|解决方案:如果你使用的是windows，请确保你安装的是numpy%2Bmkl而不是numpy。如果您已经安装了scipy和numpy，则使用"pip+uninstall+scipy“和"pip+uninstall+numpy”卸载|4415861|然后从http://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy下载numpy-1.13.1%2Bmkl-+cp34-cp34m+-win32.whl，并使用pip+install+numpy-1.13.1%2Bmkl-cp34-cp34m-win32.wh安装。注意:在cp34-cp34m34中表示您正在使用的python版本，因此请下载相关版本。|offset|length|4415862|现在从http://www.lfd.uci.edu/~gohlke/pythonlibs/#scipy+(适用于您的python和系统的版本)下载scipy并使用"pip+install+scipy-0.19.1-cp34-cp34m-win32.whl“进行安装。|4415863|你的numpy和Scipy现在应该都能用了。Christoph+Gohlke的这些二进制文件使得在windows上安装python包变得非常容易。但请确保从那里下载所有依赖包。|4415864|entityMap|0|LINK|mutability|MUTABLE|url|http://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy|1|http://www.lfd.uci.edu/~gohlke/pythonlibs/#scipy^0|0|0|3|1C|0|0|3|1C|1|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|W|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|X|8|@]|9|@$F|Y|G|Z|1|10]]|A|$]]|$1|H|3|I|5|6|7|11|8|@]|9|@$F|12|G|13|1|14]]|A|$]]|$1|J|3|K|5|6|7|15|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|16|8|@]|9|@]|A|$]]]|M|$N|$5|O|P|Q|A|$R|S]]|T|$5|O|P|Q|A|$R|U]]]]

I had the same problem while installing gensim on windows. Gensim is dependent on scipy and scipy on numpy. Making all three work is real pain. It took me a lot of time to make all there work on same time.

Solution:
If you are using windows make sure you install numpy+mkl instead of just numpy.
If you have already installed scipy and numpy, uninstall then using "pip uninstall scipy" and "pip uninstall numpy"

Then download numpy-1.13.1+mkl-cp34-cp34m-win32.whl from <a href="http://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy" rel="nofollow noreferrer">http://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy</a>
and install using pip install numpy-1.13.1+mkl-cp34-cp34m-win32.wh
Note: in cp34-cp34m 34 represent the version of python you are using, so download the relevant version.

Now download scipy from <a href="http://www.lfd.uci.edu/~gohlke/pythonlibs/#scipy" rel="nofollow noreferrer">http://www.lfd.uci.edu/~gohlke/pythonlibs/#scipy</a> (appropriate version for your python and system)
and install using "pip install scipy‑0.19.1‑cp34‑cp34m‑win32.whl"

Your numpy and Scipy both should work now. 
These binaries by Christoph Gohlke makes it very easy to install python packages on windows. But make sure you download all the dependent packages from there.

blocks|key|4415901|text|我最近在jupyter+(python3.x，win10)中加载scipy时遇到了同样的错误，尽管我刚刚通过pip升级到numpy-1.13.3%2Bmkl。解决方案是简单地升级scipy包(从v0.19升级到v1.0.0)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4415902|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I recently got the same error when trying to load scipy in jupyter (python3.x, win10), although just having upgraded to numpy-1.13.3+mkl through pip. 
The solution was to simply upgrade the scipy package (from v0.19 to v1.0.0).

blocks|key|4415941|text|错误的原因是你升级了你的numpy库，当前版本需要一些来自scipy的功能才能运行，而scipy中可能找不到这些功能。只需使用python+-m+pip+install+scipy+--upgrade来升级您的scipy库。我也遇到了同样的错误，这个解决方案在我的python3.5上起作用了。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4415942|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

The reason for the error is you upgraded your numpy library of which there are some functionalities from scipy that are required by the current version for it to run which may not be found in scipy. Just upgrade your scipy library using python -m pip install scipy --upgrade. I was facing the same error and this solution worked on my python 3.5.

blocks|key|4415970|text|是的，只需重新安装numpy，它就可以工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4415971|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

yes,Just reinstall numpy,it works.

blocks|key|4416025|text|我没有足够的声誉来评论，但我想补充的是，.whl文件的cp编号代表您的python版本。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4416026|cp35+->+Python+3.5.x|4416027|cp36+->+Python+3.6.x|4416028|cp37+->+Python+3.7.x|4416029|我认为这很明显，但我仍然为此浪费了近一个小时，也许其他人也在为此而苦苦挣扎。|4416030|所以对于我来说，我在这里下载的工作版本cp36：https://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy，因为我使用的是Python3.6.8。|offset|length|4416031|然后我卸载了numpy：|4416032|pip+uninstall+numpy+|code-block|syntax|javascript|4416033|然后我安装了numpy%2Bmkl：|4416034|pip+install+<destination+of+your+.whl+file>|4416035|entityMap|0|LINK|mutability|MUTABLE|url|https://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy^0|0|0|0|0|0|O|1D|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|16|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|17|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|18|8|@]|9|@]|A|$]]|$1|F|3|G|5|6|7|19|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|1A|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|1B|8|@]|9|@$L|1C|M|1D|1|1E]]|A|$]]|$1|N|3|O|5|6|7|1F|8|@]|9|@]|A|$]]|$1|P|3|Q|5|R|7|1G|8|@]|9|@]|A|$S|T]]|$1|U|3|V|5|6|7|1H|8|@]|9|@]|A|$]]|$1|W|3|X|5|R|7|1I|8|@]|9|@]|A|$S|T]]|$1|Y|3|-4|5|6|7|1J|8|@]|9|@]|A|$]]]|Z|$10|$5|11|12|13|A|$14|15]]]]

I don't have enough reputation to comment but I want to add, that the cp number of the .whl file stands for your python version.

cp35 -> Python 3.5.x 

cp36 -> Python 3.6.x

cp37 -> Python 3.7.x

I think it's pretty obvious but still I wasted almost an hour because of this and maybe other people struggle with that, too.

So for me worked version cp36 that I downloaded here: <a href="https://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy" rel="nofollow noreferrer">https://www.lfd.uci.edu/~gohlke/pythonlibs/#numpy</a>
since I am using Python 3.6.8.

Then I uninstalled numpy:

<pre><code>pip uninstall numpy 
</code></pre>

Then I installed numpy+mkl:

<pre><code>pip install &lt;destination of your .whl file&gt;
</code></pre>

I am trying to run the following simple code 

<pre><code>import scipy
scipy.test()
</code></pre>

But I am getting the following error

<pre><code>Traceback (most recent call last):
 File "&lt;stdin&gt;", line 1, in &lt;module&gt;
 File "C:\Python27\lib\site-packages\spyderlib\widgets\externalshell\sitecustomize.py", line 586, in runfile
 execfile(filename, namespace)
 File "C:/Users/Mustafa/Documents/My Python Code/SpectralGraphAnalysis/main.py", line 8, in &lt;module&gt;
 import scipy
 File "C:\Python27\lib\site-packages\scipy\__init__.py", line 61, in &lt;module&gt;
 from numpy._distributor_init import NUMPY_MKL # requires numpy+mkl
ImportError: cannot import name NUMPY_MKL
</code></pre>

I am using python 2.7 under windows 10.

I have installed <code>scipy</code> but that does not seem to solve the problem

Any help is appreciated.

ImportError: cannot import name NUMPY_MKL

Windows

Python

我正在尝试运行以下简单的代码import scipyscipy.test()但是我得到了以下错误Traceback (most recent call last): File "<stdin>", line 1, in <module> File "C:\Python27\lib\site-packages\spy...

问ImportError:无法导入名称NUMPY_MKL
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问ImportError:无法导入名称NUMPY_MKLEN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问ImportError:无法导入名称NUMPY_MKL
EN