blocks|key|2854193|text|如果您尝试使用HTTP或HTTPS将大量更改推送到Git存储库，您可能会收到诸如error：RPC+failed;+result=22,+HTTP+code+=+411之类的错误消息。这是由Git配置默认设置造成的，该默认设置将某些HTTP操作限制在1+to以内。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2854194|要更改此限制，请在本地存储库中运行|2854195|git+config+http.postBuffer+*bytes*|code-block|syntax|javascript|2854196|其中字节是允许的最大字节数。例如：|2854197|git+config+http.postBuffer+524288000|2854198|500MB+(感谢@恒杰)|2854199|entityMap^0|1A|12|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|X|8|@]|D|@]|E|$]]|$1|H|3|I|5|J|7|Y|8|@]|D|@]|E|$K|L]]|$1|M|3|N|5|6|7|Z|8|@]|D|@]|E|$]]|$1|O|3|P|5|J|7|10|8|@]|D|@]|E|$K|L]]|$1|Q|3|R|5|6|7|11|8|@]|D|@]|E|$]]|$1|S|3|-4|5|6|7|12|8|@]|D|@]|E|$]]]|T|$]]

If you attempt to push a large set of changes to a Git repository with HTTP or HTTPS, you may get an error message such as error: <code>RPC failed; result=22, HTTP code = 411</code>. This is caused by a Git configuration default which limits certain HTTP operations to 1 megabyte.

To change this limit run within your local repository

<pre><code>git config http.postBuffer *bytes*
</code></pre>

where bytes is the maximum number of bytes permitted. For example:

<pre><code>git config http.postBuffer 524288000
</code></pre>

For 500MB (thanks @Hengjie)

blocks|key|209791|text|您也可以在全球范围内执行此操作-|type|unstyled|depth|inlineStyleRanges|entityRanges|data|209792|git+config+--global+http.postBuffer+524288000|code-block|syntax|javascript|209793|这将允许所有本地repos推送高达500MB的数据。|209794|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

You can also do this globally - 

<pre><code>git config --global http.postBuffer 524288000
</code></pre>

That will allow all local repos to push up to 500MB of data.

blocks|key|209811|text|如果您使用的是TortoiseGit+for+Windows，最简单的方法是使用集成配置。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|209812|在文件资源管理器中，按鼠标左键，选择TortoiseGit+->设置。接受info消息。现在，您可以选择是否仅为当前项目或系统whide配置该属性。对于系统范围的配置，按"edit+systemwide+gitconfig“并将下一行添加到部分[http]|offset|length|style|CODE|209813|postBuffer+=+524288000|code-block|syntax|javascript|209814|(如果[http]节不存在，则创建它)|209815|entityMap^0|0|3E|6|0|0|3|6|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|R|8|@$D|S|E|T|F|G]]|9|@]|A|$]]|$1|H|3|I|5|J|7|U|8|@]|9|@]|A|$K|L]]|$1|M|3|N|5|6|7|V|8|@$D|W|E|X|F|G]]|9|@]|A|$]]|$1|O|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|P|$]]

If you are using TortoiseGit for Windows, the easiest way is using the integrated configuration.

In a file explorer press left mouse button, select TortoiseGit -> Settings. Accept the info message. Now, you can choose if you want to configure the property only for the current project or system whide. For systemwide configuration press "edit systemwide gitconfig" and add the next line to the section <code>[http]</code>:

<pre><code>postBuffer = 524288000
</code></pre>

(it the section <code>[http]</code> doesn't exist, create it)

blocks|key|209817|text|提供的解决方案对我们来说都不起作用。我们不得不切换到ssh，而不是HTTPS解决方案。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|209818|entityMap^0|Q|3|X|5|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

None of the solutions provided worked for us. We had to switch to <code>ssh</code> to make this work instead of the <code>HTTPS</code> solution.

blocks|key|212903|text|我解决了22个错误，如下所示:在"git+clone“命令中，我没有提供user:password。克隆成功了，但推送失败了。22错误的解决方案:像这样修改.git/config+url+:+url=http://user:pwd@host/...然后，推送成功了。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|212904|entityMap|0|LINK|mutability|MUTABLE|url|http://user:pwd@host/^0|2S|L|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

I solved the 22 error as follows:
In the "git clone" command I did NOT supply the user:password.
The clone worked, but not the push.
Solution for the 22 error:
Modify .git/config the url like this:
url=<a href="http://user:pwd@host/" rel="nofollow noreferrer">http://user:pwd@host/</a>...
Then, the push worked.

blocks|key|209837|text|使用git+lfs并跟踪大于1mb的文件，然后再次尝试推送|type|unstyled|depth|inlineStyleRanges|entityRanges|data|209838|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

use git lfs and track files greater than 1 mb and then again try to push

I have only one branch. For a few months I have been using

<pre><code>git push origin master
</code></pre>

to commit to my local repository. Last night after I made some minor changes to my local repository and tried to push using the same command, I got this error:

<pre><code>error: RPC failed; result=22, HTTP code = 411
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
Everything up-to-date
</code></pre>

I googled and found questions such as <a href="https://stackoverflow.com/q/999907/1270459">this one</a> and <a href="https://stackoverflow.com/q/2936652/1270459">this one</a>, but none of the answers to these questions solves my problem.

Most of the answers suggest the problem of detached head. Yet I don't think my head is detached. Nor do I think I am on the wrong branch (as I only have one branch...)

I did a few experiments to figure out what's wrong, and here are the results I got:

(1) First comes my <code>git status</code> output

<blockquote>
<pre><code># On branch master
# Untracked files:
# (use "git add &lt;file&gt;..." to include in what will be committed)
#
# egal.aux
# egal.blg
# egal.out
# egal.pdf
# egalcar.aux
# egalcar.blg
# egalcar.pdf
nothing added to commit but untracked files present (use "git add" to track)
</code></pre>
</blockquote>

(2) When I type <code>git reflog</code>, I can see all my local commits, but the remote repository just won't get updated.

(3) When I type <code>git branch -a</code>, I get

<blockquote>
<pre><code>* master
 remotes/origin/master
</code></pre>
</blockquote>

(4) When I type <code>git remote show origin</code>, I get

<blockquote>
<pre><code>* remote origin
 Fetch URL: http://github.com/CherryQu921/egaldoc_en
 Push URL: http://github.com/CherryQu921/egaldoc_en
 HEAD branch: master
 Remote branch:
 master tracked
 Local ref configured for 'git push':
 master pushes to master (fast-forwardable)
</code></pre>
</blockquote>

I think the last line of output (the "fast-forwardable") is weird, but I am not sure what is wrong...

git push fails: RPC failed; result=22, HTTP code = 411

Windows

我只有一个分支。几个月来我一直在用git push origin master提交到我的本地存储库。昨天晚上，我对本地存储库做了一些小改动，并尝试使用相同的命令进行推送，但得到了以下错误：error: RPC failed; result=22, HTTP code = 411fatal: The remote end...

问git推送失败: RPC失败，result=22，HTTP code = 411
EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问git推送失败: RPC失败，result=22，HTTP code = 411EN

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问git推送失败: RPC失败，result=22，HTTP code = 411
EN