blocks|key|128921|text|试试这个吧。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|128922|对于Swift+2.0，不需要将Alamofire.xcodeproj添加到xcode中。只需从https://github.com/Alamofire复制并粘贴源文件夹，即可完成。|offset|length|128923|或者，如果你想从Cocoapods安装Alamofire，那么试试下面的代码。|128924|++source+'https://github.com/CocoaPods/Specs.git'
++platform+:ios,+'8.0'
++use_frameworks!

++pod+'Alamofire',+'~>+2.0'|code-block|syntax|javascript|128925|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/Alamofire^0|0|1C|S|0|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|V|8|@]|9|@$D|W|E|X|1|Y]]|A|$]]|$1|F|3|G|5|6|7|Z|8|@]|9|@]|A|$]]|$1|H|3|I|5|J|7|10|8|@]|9|@]|A|$K|L]]|$1|M|3|-4|5|6|7|11|8|@]|9|@]|A|$]]]|N|$O|$5|P|Q|R|A|$S|T]]]]

Try this one.

For Swift 2.0 there is no need to add Alamofire.xcodeproj into your xcode. Simply copy and paste source folder from <a href="https://github.com/Alamofire">https://github.com/Alamofire</a> and you are done.

or if you want to install Alamofire from Cocoapods then try below code.

<pre><code> source 'https://github.com/CocoaPods/Specs.git'
 platform :ios, '8.0'
 use_frameworks!

 pod 'Alamofire', '~&gt; 2.0'
</code></pre>

blocks|key|128951|text|对我来说，诀窍是打开.xcworkspace文件，而不是原始项目文件本身。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|128952|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

The Trick for me was to open the .xcworkspace file rather then the original project file itself.

blocks|key|2900065|text|导入UIKit后再导入Alamofire，然后将其注释掉，首先构建项目。取消对它的注释。(这对我和其他人都有效，而其他答案不起作用)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2900066|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

import Alamofire after importing UIKit
Then comment it out, build the project first.
Uncomment it. 
(this worked for me, and others, when the other answers did not).

blocks|key|2900083|text|对于将来遇到此问题的任何人，请参考：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2900084|Swift+2.x+%2B+CocoaPods+1.x|offset|length|style|BOLD|2900085|症状：构建可以在Xcode中进行调试配置，但在控制台使用pod+lib+lint或类似命令执行xcodebuild时会失败。结果是error:+no+such+module+'X'|CODE|2900086|解决方案：MyProject.podspec中的添加依赖项而不指定版本：|2900087|spec.dependency+"Alamofire"|code-block|syntax|javascript|2900088|Podfile还应该包含相同的依赖项。然后运行：|2900089|$+pod+install+&&+open+MyProject.xcworkspace|2900090|您应该打开.xcworkspace而不是.xcodeproj。构建现在可以在Xcode和控制台中工作，并且pod+lib+lint通过了验证。|2900091|我写这篇文章是因为我试图发布一个新的CocoaPods+pod库，但也有类似的问题，但没有找到答案，也因为谷歌导致了这个问题。|2900092|entityMap^0|0|0|P|0|0|3|S|C|1B|A|1T|P|0|0|O|5|H|0|0|0|7|0|0|5|C|K|A|1H|C|0|0^^$0|@$1|2|3|4|5|6|7|11|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|12|8|@$D|13|E|14|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|15|8|@$D|16|E|17|F|G]|$D|18|E|19|F|J]|$D|1A|E|1B|F|J]|$D|1C|E|1D|F|J]]|9|@]|A|$]]|$1|K|3|L|5|6|7|1E|8|@$D|1F|E|1G|F|G]|$D|1H|E|1I|F|J]]|9|@]|A|$]]|$1|M|3|N|5|O|7|1J|8|@]|9|@]|A|$P|Q]]|$1|R|3|S|5|6|7|1K|8|@$D|1L|E|1M|F|J]]|9|@]|A|$]]|$1|T|3|U|5|O|7|1N|8|@]|9|@]|A|$P|Q]]|$1|V|3|W|5|6|7|1O|8|@$D|1P|E|1Q|F|J]|$D|1R|E|1S|F|J]|$D|1T|E|1U|F|J]]|9|@]|A|$]]|$1|X|3|Y|5|6|7|1V|8|@]|9|@]|A|$]]|$1|Z|3|-4|5|6|7|1W|8|@]|9|@]|A|$]]]|10|$]]

For reference to anyone who comes across this problem in the future:

Swift 2.x + CocoaPods 1.x 

Symptoms: build works in Xcode for debug configuration but fails when <code>xcodebuild</code> is executed from console using <code>pod lib lint</code> or similar command. The result is <code>error: no such module 'X'</code>

Solution: 
In <code>MyProject.podspec</code> add your dependencies without specifying versions:

<pre><code>spec.dependency "Alamofire"
</code></pre>

The <code>Podfile</code> should also contain the same dependencies. Then run:

<pre><code>$ pod install &amp;&amp; open MyProject.xcworkspace
</code></pre>

You should open <code>.xcworkspace</code> instead of <code>.xcodeproj</code>. The build will now work in both Xcode and console and <code>pod lib lint</code> passes validation.

I wrote this because I was trying to publish a new CocoaPods pod library and had a similar issue but found no answer and also because Google leads to this question.

blocks|key|129068|text|下面是要做的事情：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|129069|129070|关闭您的项目，|unordered-list-item|129071|安装您的pod库，|129072|，然后安装alamofire。|129073|129074|完成所有操作后，不要打开扩展名为.xcodeproj的文件，而要打开扩展名为.xcworkspace的文件|offset|length|style|CODE|129075|entityMap^0|0|0|0|0|0|0|G|A|12|C|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|T|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|U|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|V|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|W|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|X|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|Y|8|@$M|Z|N|10|O|P]|$M|11|N|12|O|P]]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|R|$]]

Here is what to do:

<ul>
<li>close your project,</li>
<li>install your pod library, </li>
<li>then install alamofire.</li>
</ul>

After you do all things, don't open the file with extension <code>.xcodeproj</code> but open the file with extension <code>.xcworkspace</code>

blocks|key|126582|text|我的问题是通过以下步骤解决的：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126583|清除Project转到Project+>+Build+Setting+>+Framework+Search+Path并添加|126584|126585|"$PODS_CONFIGURATION_BUILD_DIR/Alamofire“as+non-recursive|unordered-list-item|126586|$(inherited)+as+non-recursive|126587|$(SRCROOT)+as递归|126588|126589|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|P|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|E|3|F|5|G|7|R|8|@]|9|@]|A|$]]|$1|H|3|I|5|G|7|S|8|@]|9|@]|A|$]]|$1|J|3|K|5|G|7|T|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|U|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|N|$]]

My problem was solved using these steps :

Clean Project 
Goto Project > Build Setting > Framework Search Path 
and add

<ul>
<li>"$PODS_CONFIGURATION_BUILD_DIR/Alamofire" as non-recursive</li>
<li>$(inherited) as non-recursive</li>
<li>$(SRCROOT) as recursive</li>
</ul>

blocks|key|127511|text|将Alamo+Fire添加到目标的所有构建阶段都为我修复了它。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|127512|​|127513|📷|atomic|offset|length|127514|127515|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/9f5d73b381a17cfd1b5692b39c194207.png|imageAlt^0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@$G|V|H|W|1|X]]|A|$]]|$1|I|3|C|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q|R|-4]]]]

Adding Alamo Fire to all of my target's build phases fixed it for me.

<a href="https://i.stack.imgur.com/yxCHJ.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/yxCHJ.png" alt="Alamo Fire Link Binary With Libraries"></a>

blocks|key|2900137|text|一直面临着同样的问题，以下技巧解决了问题|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2900138|Go+to+Manage+scheme+->+Select+pod+library+that+is+causing+issue+->+Build

Change+back+the+scheme+to+project+and+then+run+the+app,+you+are+good+to+go|code-block|syntax|javascript|2900139|注意：如果您在方案中没有看到pod库，请转到Manage+scheme并选择您想要构建的pod库。|offset|length|style|BOLD|2900140|entityMap^0|0|0|0|2|M|D|0^^$0|@$1|2|3|4|5|6|7|O|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Q|8|@$I|R|J|S|K|L]|$I|T|J|U|K|L]]|9|@]|A|$]]|$1|M|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|N|$]]

Have been facing the same problem, following trick resolved the issue

<pre><code>Go to Manage scheme -&gt; Select pod library that is causing issue -&gt; Build

Change back the scheme to project and then run the app, you are good to go
</code></pre>

Note: If you don't see the pod library in the scheme, go to Manage scheme and select the pod library that you would like to build.

blocks|key|126688|text|只有一种方法可以解决这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126689|126690|退出Xcode。|blockquote|126691|126692|删除位于/Users/username/Library/Developer/Xcode/DerivedData的项目临时文件|126693|删除ProjectName.xcworkspace|126694|删除Podfile.lock文件和pod文件夹，运行pod+install。|126695|打开新创建的ProjectName.xcworkspace文件并进行构建。|126696|126697|致谢给Dimitris+Bouzikas+here|offset|length|126698|entityMap|0|LINK|mutability|MUTABLE|url|https://stackoverflow.com/questions/41709912/error-could-not-build-objective-c-module-firebase^0|0|0|0|0|0|0|0|0|0|L|4|0|0^^$0|@$1|2|3|4|5|6|7|11|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|12|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|13|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|14|8|@]|9|@]|A|$]]|$1|G|3|H|5|6|7|15|8|@]|9|@]|A|$]]|$1|I|3|J|5|6|7|16|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|17|8|@]|9|@]|A|$]]|$1|M|3|N|5|6|7|18|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|19|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|1A|8|@]|9|@$R|1B|S|1C|1|1D]]|A|$]]|$1|T|3|-4|5|6|7|1E|8|@]|9|@]|A|$]]]|U|$V|$5|W|X|Y|A|$Z|10]]]]

There is only one way to solve this issue.
<blockquote>
Quit Xcode.
Delete project's temp files located at
/Users/username/Library/Developer/Xcode/DerivedData
Delete ProjectName.xcworkspace
Delete Podfile.lock file and Pods folder Run pod install.
Open the newly created ProjectName.xcworkspace file and build.
</blockquote>
credits to Dimitris Bouzikas <a href="https://stackoverflow.com/questions/41709912/error-could-not-build-objective-c-module-firebase">here</a>

blocks|key|129653|text|在完成@satoshin+answer之后，我还必须检查Manage+Schemes窗口右侧的Shared框。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|129654|entityMap^0|S|E|1B|6|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|M|8|@]|D|@]|E|$]]]|G|$]]

After doing @satoshin answer, I also had to check the <code>Shared</code> box on the right hand side of the <code>Manage Schemes</code> window.

blocks|key|2900281|text|转到finder，找到项目并导航到“.xcworkspace”文件。这就是安装pod的地方。如果您转到原始项目'.xcodeproj‘，您将只看到pod调试文件。希望这能有所帮助。我也花了一段时间才弄明白这个问题。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|2900282|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

go to finder locate the project and navigate to the '.xcworkspace' file. thats where your pods are installed. if you go to your original project '.xcodeproj' you will only the pod debug files. hopes this helps. took me a while to figure out the problem too.

blocks|key|2687842|text|我正在使用swift+3，我通过删除这个项目的Derived+Data修复了这个问题。干杯...！|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2687843|entityMap^0|N|C|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

I am using swift 3, I fixed this problem by deleting <code>Derived Data</code> for this project.
Cheers...!!!

blocks|key|2687845|text|如果清理项目/重新启动xcode/重新安装cocoapods等，则不起作用。您可以尝试运行Product+->+Build+for+->+Testing+(cmd+%2B+shift+%2B+u)。构建失败，但导入之后立即工作。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2687846|entityMap^0|19|7|1K|9|1X|P|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

If clean project/restart xcode/reinstall cocoapods etc, did not work. You can try running <code>Product</code> -> <code>Build for</code> -> <code>Testing (cmd + shift + u)</code>. The build failed but the import worked right after.

blocks|key|127480|text|至于我，我的工作是更改项目的名称。意外地将|type|unstyled|depth|inlineStyleRanges|entityRanges|data|127481|127482|+ProjectNameTests|blockquote|127483|127484|127485|而不是|127486|127487|+ProjectName|127488|127489|127490|如果您在任何地方都正确地配置了名称，则不需要模式：|127491|127492|检查Podfile|ordered-list-item|127493|检查已启动的项目文件。(白色图标应该被创建为"xcworkspace")|127494|Product项目干净的构建和链接的构建(现在你可以从头开始在simulator).|127495|Start中运行，因为大多数错误总是发生在一个人类错误的原因中，而不是你在Podfile中输入了错误的名称"Linked+Frameworks...“)。如果是，请删除此框架。路径显示在下面的屏幕截图中。|127496|127497|📷|atomic|offset|length|127498|​|127499|正确的Podfile示例(Alamofire)：|127500|'https://github.com/CocoaPods/Specs.git'
platform+:ios,+'10.0'
use_frameworks!

target+'ProjectName'+do
++pod+'Alamofire',+'~>+4.7'
end|code-block|syntax|javascript|127501|127502|ProjectName不应包含任何扩展名(文件类型)。|unordered-list-item|127503|127504|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/930975efde40251b16dfc3a2dd46b9b3.png|imageAlt^0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1T|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|1U|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|1V|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|1W|8|@]|9|@]|A|$]]|$1|G|3|-4|5|6|7|1X|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|1Y|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|K|3|L|5|E|7|20|8|@]|9|@]|A|$]]|$1|M|3|-4|5|6|7|21|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|22|8|@]|9|@]|A|$]]|$1|O|3|P|5|6|7|23|8|@]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|24|8|@]|9|@]|A|$]]|$1|R|3|S|5|T|7|25|8|@]|9|@]|A|$]]|$1|U|3|V|5|T|7|26|8|@]|9|@]|A|$]]|$1|W|3|X|5|T|7|27|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|T|7|28|8|@]|9|@]|A|$]]|$1|10|3|-4|5|6|7|29|8|@]|9|@]|A|$]]|$1|11|3|12|5|13|7|2A|8|@]|9|@$14|2B|15|2C|1|2D]]|A|$]]|$1|16|3|17|5|6|7|2E|8|@]|9|@]|A|$]]|$1|18|3|19|5|6|7|2F|8|@]|9|@]|A|$]]|$1|1A|3|1B|5|1C|7|2G|8|@]|9|@]|A|$1D|1E]]|$1|1F|3|-4|5|6|7|2H|8|@]|9|@]|A|$]]|$1|1G|3|1H|5|1I|7|2I|8|@]|9|@]|A|$]]|$1|1J|3|-4|5|6|7|2J|8|@]|9|@]|A|$]]|$1|1K|3|-4|5|6|7|2K|8|@]|9|@]|A|$]]]|1L|$1M|$5|1N|1O|1P|A|$1Q|1R|1S|-4]]]]

As for me worked to change the name of the project. Accidentally put 

<blockquote>
 ProjectNameTests
</blockquote>

instead of 

<blockquote>
 ProjectName
</blockquote>

No schemas needed if you've configured the names correctly everywhere:

<ol>
<li>Check Podfile</li>
<li>Check which project file you've launched. 
(The white icon should be created for "xcworkspace")</li>
<li>Product -> Clean Build Folder</li>
<li>Product -> Build (Now you can run in a simulator).</li>
<li>Start from the scratch, because most of the errors always occur in a cause of humanity mistake, not developers.</li>
<li>If you've put the wrong name for project in Podfile check "Linked Frameworks...". If so - delete this framework. The path is showed below at screenshot.<a href="https://i.stack.imgur.com/bZogh.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/bZogh.png" alt="enter image description here"></a></li>
</ol>

Example of correct Podfile (Alamofire):

<pre><code>'https://github.com/CocoaPods/Specs.git'
platform :ios, '10.0'
use_frameworks!

target 'ProjectName' do
 pod 'Alamofire', '~&gt; 4.7'
end
</code></pre>

<ul>
<li>ProjectName should not contain any extensions(file types).</li>
</ul>

blocks|key|127527|text|对于未来的求职者来说，你可能错过了下面的第二步：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|127528|转到项目设置|127529|127530|转到构建阶段选项卡，创建一个新的运行脚本阶段，并将输入文件添加到您的Alamofire框架。在我的例子中，我将$(SRCROOT)/Carthage/Build/IOS/Alamofire.framework|ordered-list-item|offset|length|style|BOLD|CODE|127531|Go设置为常规选项卡，向下滚动到链接框架和库添加Alamofire.Framework文件夹。你可能在列表中找不到它，所以你需要按下“添加其他”按钮，然后自己介绍它。|127532|127533|entityMap^0|0|0|0|2|4|1J|1D|0|5|2|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|T|8|@]|9|@]|A|$]]|$1|E|3|F|5|G|7|U|8|@$H|V|I|W|J|K]|$H|X|I|Y|J|L]]|9|@]|A|$]]|$1|M|3|N|5|G|7|Z|8|@$H|10|I|11|J|K]]|9|@]|A|$]]|$1|O|3|-4|5|6|7|12|8|@]|9|@]|A|$]]|$1|P|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|Q|$]]

[For future seekers] you could have missed the second step from the below :

Go to Project Setting

<ol>
<li>Go to Build Phase tab, create a new run script phase and add an input file to your Alamofire framework. In my case I set <code>$(SRCROOT)/Carthage/Build/IOS/Alamofire.framework</code></li>
<li>Go to General tab, scroll down to linked framework and libraries add Alamofire.Framework folder. You probably won't find it from list so you need to press "Add Other" button and introduce it yourself.</li>
</ol>

blocks|key|129084|text|对于新手来说，只需关闭xcode项目并以新方式打开即可。在包含如下扩展名的文件夹文件中选择：.xcodeproj，尽情享受生活。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|129085|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

For absolute newbie just close xcode project and open by the new way.
Choose in your folder file which contains extension like this: .xcodeproj and just enjoy you life.

blocks|key|126719|text|对我来说，解决方案是从Pod和项目中排除arm64设备。图片在附件中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|126720|​|126721|📷|atomic|offset|length|126722|126723|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/a5d2f52b0bb8f2d45a0f1e856a4b88e4.png|imageAlt^0|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@$G|V|H|W|1|X]]|A|$]]|$1|I|3|C|5|6|7|Y|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q|R|-4]]]]

For me, solution was to exclude arm64 devices from Pods and Project.
Image is in attachment.
<a href="https://i.stack.imgur.com/EvqAE.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/EvqAE.png" alt="Problem solved" /></a>

Using Xcode 7

I am trying to install Alamofire in a sample project. Have used the instructions from <a href="http://www.raywenderlich.com/97014/use-cocoapods-with-swift" rel="noreferrer">Ray Wenderlich's page</a>

Only change from above link is the podfile -- which is from GitHub page <a href="https://github.com/Alamofire/Alamofire/tree/swift-2.0" rel="noreferrer">here</a> because the version has been updated. I have also used the Swift 2.0 branch.

Below is the snapshop of the error, my pod file and my terminal post installing the pod

<a href="https://i.stack.imgur.com/wEFlB.png" rel="noreferrer"><img src="https://i.stack.imgur.com/wEFlB.png" alt=""></a>

PODFILE
<a href="https://i.stack.imgur.com/W8PsP.png" rel="noreferrer"><img src="https://i.stack.imgur.com/W8PsP.png" alt="enter image description here"></a>

TERMINAL
<a href="https://i.stack.imgur.com/q6JnX.png" rel="noreferrer"><img src="https://i.stack.imgur.com/q6JnX.png" alt="enter image description here"></a>

P.S: I want to use cocoapods to install Alamofire. I don't want to download it from github page

Alamofire No Such Module (CocoaPods)

GitHub

Swift

Xcode

使用Xcode 7我正在尝试在一个示例项目中安装Alamofire。我使用了中的说明上面链接的唯一变化是podfile --它来自GitHub页面，因为版本已经更新。我还使用了Swift 2.0分支。下面是错误的snapshop，我的pod文件和我的终端post安装pod​​PODFILE​终端​附言:我想使用cocoapods来安装Alamofire。我不想从github页面下载它

问Alamofire没有这样的模块(CocoaPods)
EN

回答 17

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Alamofire没有这样的模块(CocoaPods)EN

回答 17

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Alamofire没有这样的模块(CocoaPods)
EN