blocks|key|728047|text|我还没有尝试过，但nexe看起来可以做到：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|728048|https://github.com/crcn/nexe|offset|length|728049|entityMap|0|LINK|mutability|MUTABLE|url^0|0|0|S|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@$D|O|E|P|1|Q]]|A|$]]|$1|F|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|C]]]]

Haven't tried it, but nexe looks like nexe can do this:

<a href="https://github.com/crcn/nexe" rel="noreferrer">https://github.com/crcn/nexe</a>

blocks|key|727961|text|由于这个问题已经得到了回答，另一个解决方案已经推出。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|727962|https://github.com/appjs/appjs|offset|length|727963|在撰写本文时，这是通过将node.js应用程序打包成一个编译成可执行文件的精简铬包来打包的最终解决方案。|727964|编辑:+AppJS不再处于活动状态，但它本身建议使用名为deskshell的分支。|727965|https://github.com/sihorton/appjs-deskshell/|727966|entityMap|0|LINK|mutability|MUTABLE|url|1^0|0|0|U|0|0|0|0|0|18|1|0^^$0|@$1|2|3|4|5|6|7|T|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|U|8|@]|9|@$D|V|E|W|1|X]]|A|$]]|$1|F|3|G|5|6|7|Y|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|Z|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|10|8|@]|9|@$D|11|E|12|1|13]]|A|$]]|$1|L|3|-4|5|6|7|14|8|@]|9|@]|A|$]]]|M|$N|$5|O|P|Q|A|$R|C]]|S|$5|O|P|Q|A|$R|K]]]]

Since this question has been answered, another solution has been launched.

<a href="https://github.com/appjs/appjs" rel="nofollow noreferrer">https://github.com/appjs/appjs</a>

At the time of this writing, this is the end-all solution for packaging node.js apps through a stripped down chromium package compiled into an executable.

Edit:
AppJS is no longer active, but itself suggests a fork called deskshell. 

<a href="https://github.com/sihorton/appjs-deskshell/" rel="nofollow noreferrer">https://github.com/sihorton/appjs-deskshell/</a>

blocks|key|728106|text|试试nexe，它可以从你的node.js应用程序中创建一个单独的可执行文件|type|unstyled|depth|inlineStyleRanges|entityRanges|data|728107|https://github.com/nexe/nexe|offset|length|728108|entityMap|0|LINK|mutability|MUTABLE|url^0|0|0|S|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@$D|O|E|P|1|Q]]|A|$]]|$1|F|3|-4|5|6|7|R|8|@]|9|@]|A|$]]]|G|$H|$5|I|J|K|A|$L|C]]]]

Try nexe which creates a single executable out of your node.js apps

<a href="https://github.com/nexe/nexe" rel="nofollow noreferrer">https://github.com/nexe/nexe</a>

blocks|key|728011|text|我确实发现这些解决方案中的任何一个都满足了我的需求，所以我自己创建了一个名为node2exe的node版本来实现这一点。它可以从https://github.com/areve/node2exe获得|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|728012|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/areve/node2exe^0|1S|X|0|0^^$0|@$1|2|3|4|5|6|7|L|8|@]|9|@$A|M|B|N|1|O]]|C|$]]|$1|D|3|-4|5|6|7|P|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]]]

I did find any of these solutions met my requirements, so made my own version of node called node2exe that does this. It's available from <a href="https://github.com/areve/node2exe" rel="nofollow">https://github.com/areve/node2exe</a>

blocks|key|511645|text|可能还有很多其他选择，但据我所知，在GitHub+https://github.com/zeit/pkg上有一个项目正在积极开发中。你可以玩它。另一个在https://github.com/nexe/nexe，但不是在积极开发中。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|511646|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/zeit/pkg|1|https://github.com/nexe/nexe^0|P|R|0|24|S|1|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]|$A|R|B|S|1|T]]|C|$]]|$1|D|3|-4|5|6|7|U|8|@]|9|@]|C|$]]]|E|$F|$5|G|H|I|C|$J|K]]|L|$5|G|H|I|C|$J|M]]]]

There may be many other options but to my knowledge, there is one project in active development on GitHub <a href="https://github.com/zeit/pkg" rel="nofollow noreferrer">https://github.com/zeit/pkg</a>. You can play with it.
One more at <a href="https://github.com/nexe/nexe" rel="nofollow noreferrer">https://github.com/nexe/nexe</a> but not in active development.

blocks|key|511767|text|注意:您还需要python和pip+(在debian上可能是easy_install或dpkg+)才能正常工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|511768|使用nodeenv+(使用python+-m+pip+install+nodeenv安装)(使用python+-m+nodeenv+envname创建)创建节点虚拟环境|offset|length|style|CODE|511769|使用节点虚拟环境的exe文件(存储在./envname/Scripts/node.exe中)创建一个启动代码的.bat文件，然后使用一些bat到exe转换器(http://www.battoexeconverter.com/)+idk，然后分发除bat文件之外的所有文件，使用exe转换后的文件，而不是使用某个程序将它们转换为安装程序。这就对了。|511770|您可以使用NVM或官方的节点安装程序来代替nodeenv。|511771|entityMap|0|LINK|mutability|MUTABLE|url|https://pypi.org/project/nodeenv/|1|http://www.battoexeconverter.com/^0|0|D|T|1C|P|2|7|0|0|I|Q|27|X|1|0|0^^$0|@$1|2|3|4|5|6|7|V|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|W|8|@$D|X|E|Y|F|G]|$D|Z|E|10|F|G]]|9|@$D|11|E|12|1|13]]|A|$]]|$1|H|3|I|5|6|7|14|8|@$D|15|E|16|F|G]]|9|@$D|17|E|18|1|19]]|A|$]]|$1|J|3|K|5|6|7|1A|8|@]|9|@]|A|$]]|$1|L|3|-4|5|6|7|1B|8|@]|9|@]|A|$]]]|M|$N|$5|O|P|Q|A|$R|S]]|T|$5|O|P|Q|A|$R|U]]]]

Note: You need python and pip (maybe easy_install or dpkg on debian) as well for this to work.
Create a node virtual environment using <a href="https://pypi.org/project/nodeenv/" rel="nofollow noreferrer">nodeenv</a> (install using <code>python -m pip install nodeenv</code>) (make using <code>python -m nodeenv envname</code>)
Create a .bat file launching the code using the node virtual environment's exe file (stored in <code>./envname/Scripts/node.exe</code>),
then use some bat to exe converter (<a href="http://www.battoexeconverter.com/" rel="nofollow noreferrer">http://www.battoexeconverter.com/</a>) idk
then distribute all the files except the bat file use the exe converted file instead by making them into a installer using some program. There you go.
Instead of nodeenv, you could use NVM or the official node installer.

blocks|key|511875|text|目前，我认为deno是最好的选择|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|511876|这是|511877|deno+compile+mainProgram.js|code-block|syntax|javascript|511878|现有的节点项目可能需要某种类型的转换，至少对于require语句(convert+node+projects+to+deno)是这样|511879|entityMap|0|LINK|mutability|MUTABLE|url|https://deno.land/|1|https://stackoverflow.com/questions/61770240/is-there-any-way-to-convert-a-node-project-to-deno^0|6|4|0|0|0|0|W|V|1|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@$A|X|B|Y|1|Z]]|C|$]]|$1|D|3|E|5|6|7|10|8|@]|9|@]|C|$]]|$1|F|3|G|5|H|7|11|8|@]|9|@]|C|$I|J]]|$1|K|3|L|5|6|7|12|8|@]|9|@$A|13|B|14|1|15]]|C|$]]|$1|M|3|-4|5|6|7|16|8|@]|9|@]|C|$]]]|N|$O|$5|P|Q|R|C|$S|T]]|U|$5|P|Q|R|C|$S|V]]]]

Currently, I think the way to go is <a href="https://deno.land/" rel="nofollow noreferrer">deno</a>
This is
<pre><code>deno compile mainProgram.js
</code></pre>
Existing node projects may need some sort of conversion, at least for require statements <a href="https://stackoverflow.com/questions/61770240/is-there-any-way-to-convert-a-node-project-to-deno">(convert node projects to deno)</a>

I have a node app that I wrote, that I run as follows:

<code>node.exe app.js inputArg</code>

Is there some way I can package this into a .exe by itself? So I can just do something like this?

<code>App.exe inputArg</code>

I have some way of faking this by using a batch file, so I can do this:

<code>App.bat inputArg</code>

But this requires that I have all the dependencies and node in that folder, which is not ideal.

How to make exe files from a node.js app?

GitHub

我有一个我写的节点应用程序，我按如下方式运行：node.exe app.js inputArg有没有什么方法可以将它单独打包到.exe中？这样我就可以做这样的事了？App.exe inputArg我有一些方法可以通过使用批处理文件来伪造它，所以我可以这样做：App.bat inputArg但这要求我拥有该文件夹中的所有依赖项和节点，这并不理想。

问如何从node.js应用程序中创建可执行文件？
EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何从node.js应用程序中创建可执行文件？EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问如何从node.js应用程序中创建可执行文件？
EN