blocks|key|688045|text|安装redis后，从终端输入：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|688046|redis-server|code-block|syntax|javascript|688047|你就可以让redis运行了|688048|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

After you install redis, type from terminal:

<pre><code>redis-server
</code></pre>

and you'll have redis running

blocks|key|472063|text|我用下面的方法来解决这个问题：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|472064|sudo+apt-get+install+redis-server|code-block|syntax|javascript|472065|然后运行命令以确认一切正常：|472066|sudo+service+redis-server+status|472067|输出将是：redis-server+is+running+--这意味着问题已经解决了。|offset|length|style|CODE|472068|entityMap^0|0|0|0|0|5|N|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|U|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|W|8|@$M|X|N|Y|O|P]]|9|@]|A|$]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

I solve this problem in next way:

<pre><code>sudo apt-get install redis-server
</code></pre>

then run command to confirm that everything ok:

<pre><code>sudo service redis-server status
</code></pre>

And the output will be: <code>redis-server is running</code> - that means that the problem is solved.

blocks|key|472299|text|首先在你的系统上安装redis+-|type|unstyled|depth|inlineStyleRanges|entityRanges|data|472300|brew+install+redis|code-block|syntax|javascript|472301|然后启动redis服务器-|472302|redis-server|472303|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

Install redis on your system first - 

<pre><code>brew install redis
</code></pre>

then start the redis server - 

<pre><code>redis-server
</code></pre>

blocks|key|688271|text|我使用的是redis-server.exe，必须先从here安装Redis，然后再运行windows。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|688272|从this+SO+question的顶部。|688273|entityMap|0|LINK|mutability|MUTABLE|url|https://github.com/dmajkic/redis/downloads|1|https://stackoverflow.com/questions/12038128/nodejs-using-redis-connect-redis-with-express^0|5|G|Q|4|0|0|1|G|1|0^^$0|@$1|2|3|4|5|6|7|R|8|@$9|S|A|T|B|C]]|D|@$9|U|A|V|1|W]]|E|$]]|$1|F|3|G|5|6|7|X|8|@]|D|@$9|Y|A|Z|1|10]]|E|$]]|$1|H|3|-4|5|6|7|11|8|@]|D|@]|E|$]]]|I|$J|$5|K|L|M|E|$N|O]]|P|$5|K|L|M|E|$N|Q]]]]

I'm on windows, and had to install Redis from <a href="https://github.com/dmajkic/redis/downloads" rel="noreferrer">here</a> and then run <code>redis-server.exe</code>.

From the top of <a href="https://stackoverflow.com/questions/12038128/nodejs-using-redis-connect-redis-with-express">this SO question</a>.

blocks|key|472616|text|对于那些使用docker和docker-compose和Typescript的人，我的解决方案是|type|unstyled|depth|inlineStyleRanges|entityRanges|data|472617|import+{+RedisClient+}+from+'redis';

+const+pubClient+=+new+RedisClient({+url:+'redis://redis:6379'+});|code-block|syntax|javascript|472618|至|472619|import+{+createClient+}+from+'redis';

const+pubClient+=+createClient({+url:+'redis://redis:6379'+});|472620|docker-compose.yml|472621|version:+'3.9'

services:
++main:
++++build:
++++++context:+.
++++++target:+development
++++ports:
++++++-+${PORT}:${PORT}
++++volumes:
++++++-+./src:/usr/src/app/src
++++++-+/app/node_modules
++++env_file:
++++++-+.env
++++command:+npm+run+start:dev
++++depends_on:
++++++-+mongo
++++++-+redis
++mongo:
++++image:+mongo:5.0.2-focal
++++volumes:
++++++-+mongo-data:/data/db
++mongo-express:
++++image:+mongo-express:0.54.0
++++ports:
++++++-+8081:8081
++++depends_on:
++++++-+mongo
++redis:
++++image:+redis:6.2.5-alpine

volumes:
++mongo-data:|472622|entityMap^0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|Q|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|R|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|S|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|T|8|@]|9|@]|A|$E|F]]|$1|K|3|L|5|6|7|U|8|@]|9|@]|A|$]]|$1|M|3|N|5|D|7|V|8|@]|9|@]|A|$E|F]]|$1|O|3|-4|5|6|7|W|8|@]|9|@]|A|$]]]|P|$]]

For those of you who are using docker with docker-compose and Typescript my solution was
<pre class="lang-js prettyprint-override"><code>import { RedisClient } from 'redis';

 const pubClient = new RedisClient({ url: 'redis://redis:6379' });
</code></pre>
to
<pre class="lang-js prettyprint-override"><code>import { createClient } from 'redis';

const pubClient = createClient({ url: 'redis://redis:6379' });
</code></pre>
docker-compose.yml
<pre class="lang-yaml prettyprint-override"><code>version: '3.9'

services:
 main:
 build:
 context: .
 target: development
 ports:
 - ${PORT}:${PORT}
 volumes:
 - ./src:/usr/src/app/src
 - /app/node_modules
 env_file:
 - .env
 command: npm run start:dev
 depends_on:
 - mongo
 - redis
 mongo:
 image: mongo:5.0.2-focal
 volumes:
 - mongo-data:/data/db
 mongo-express:
 image: mongo-express:0.54.0
 ports:
 - 8081:8081
 depends_on:
 - mongo
 redis:
 image: redis:6.2.5-alpine

volumes:
 mongo-data:
</code></pre>

blocks|key|688598|text|对于Windows用户，可以使用chocolatey安装Redis|type|unstyled|depth|inlineStyleRanges|entityRanges|data|688599|choco+install+redis-64|code-block|syntax|javascript|688600|然后从运行服务器|688601|C:\ProgramData\chocolatey\lib\redis-64\redis-server.exe|688602|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|N|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|O|8|@]|9|@]|A|$]]|$1|I|3|J|5|D|7|P|8|@]|9|@]|A|$E|F]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

for Windows users, you can use chocolatey to install Redis

<pre><code>choco install redis-64
</code></pre>

then run server from 

<pre><code>C:\ProgramData\chocolatey\lib\redis-64\redis-server.exe
</code></pre>

blocks|key|688203|text|我也有同样的问题，首先我尝试用sudo+service+restart重启redis-server，但问题仍然存在。然后我通过sudo+apt-get+purge+redis-server删除了redis-server，并通过sudo+apt-get+install+redis-server重新安装了它，然后redis又开始工作了。同样值得一看redis日志，它位于这里的/var/log/redis/redis-server.log|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|688204|entityMap^0|F|K|1R|V|2P|C|35|X|57|V|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]|$9|Q|A|R|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|S|8|@]|D|@]|E|$]]]|G|$]]

I also have the same problem, first I tried to restart redis-server by <code>sudo service restart</code> but the problem still remained. Then I removed <code>redis-server</code> by <code>sudo apt-get purge redis-server</code> and install it again by <code>sudo apt-get install redis-server</code> and then the redis was working again. It also worth to have a look at redis log which located in here <code>/var/log/redis/redis-server.log</code>

blocks|key|688160|text|我用的是ubuntu+12.04我通过安装redis-server解决了这个问题|type|unstyled|depth|inlineStyleRanges|entityRanges|data|688161|redis-server+installation+for+ubuntu+12.04|offset|length|688162|一些配置将会新增root权限，还会列出其他操作系统手册|688163|谢谢|688164|entityMap|0|LINK|mutability|MUTABLE|url|https://library.linode.com/databases/redis/ubuntu-12.04-precise-pangolin^0|0|0|16|0|0|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@$D|T|E|U|1|V]]|A|$]]|$1|F|3|G|5|6|7|W|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|X|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q]]]]

I used ubuntu 12.04
I solved that problem by installing redis-server

<a href="https://library.linode.com/databases/redis/ubuntu-12.04-precise-pangolin" rel="nofollow">redis-server installation for ubuntu 12.04</a>

some configuration will new root permission
Also listed manuals for other OS

Thanks

blocks|key|471936|text|对于windows平台，您必须检查redis-server是否在给定的ip:端口上运行。您可以在安装目录/conf/redis.conf中找到redis配置。默认情况下，客户端接受127.0.0.1:6379。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|471937|entityMap^0|H|C|1G|G|2I|E|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]|$9|K|A|L|B|C]|$9|M|A|N|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|O|8|@]|D|@]|E|$]]]|G|$]]

For windows platform, You must check if <code>redis-server</code> is running on given ip:port. you can find redis configuration at installation directory <code>/conf/redis.conf</code>. by default client accept <code>127.0.0.1:6379</code>.

blocks|key|688332|text|我在MBP上，安装redis详细信息我的问题被解决了，下载，解压和编译Redis+.Fixed：|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|688333|$+wget+http://download.redis.io/releases/redis-3.0.2.tar.gz

$+tar+xzf+redis-3.0.2.tar.gz

$+cd+redis-3.0.2

$+make|code-block|syntax|javascript|688334|现在编译的二进制文件可以在src目录中找到。|688335|使用以下命令运行Redis：|688336|$+src/redis-server+|688337|entityMap|0|LINK|mutability|MUTABLE|url|http://redis.io/download^0|9|5|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@$A|X|B|Y|1|Z]]|C|$]]|$1|D|3|E|5|F|7|10|8|@]|9|@]|C|$G|H]]|$1|I|3|J|5|6|7|11|8|@]|9|@]|C|$]]|$1|K|3|L|5|6|7|12|8|@]|9|@]|C|$]]|$1|M|3|N|5|F|7|13|8|@]|9|@]|C|$G|H]]|$1|O|3|-4|5|6|7|14|8|@]|9|@]|C|$]]]|P|$Q|$5|R|S|T|C|$U|V]]]]

I'm on MBP , and install <a href="http://redis.io/download" rel="nofollow">redis</a> detail my problem was resolved .Fixed the 
Download, extract and compile Redis with:

<pre><code>$ wget http://download.redis.io/releases/redis-3.0.2.tar.gz

$ tar xzf redis-3.0.2.tar.gz

$ cd redis-3.0.2

$ make
</code></pre>

The binaries that are now compiled are available in the src directory. 

Run Redis with:

<pre><code>$ src/redis-server 
</code></pre>

blocks|key|688432|text|我想你可能是通过源code.If安装了redis，你需要定位到redis-+source+-code-path/utils并运行sudo+install_server.sh命令。在此之后，请确保redis-+sudo+service+redis-server+status已作为系统sudo+service+redis-server+status的服务运行|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|688433|PS:基于Debian/Ubuntu|688434|entityMap^0|1S|M|2W|W|3X|W|0|0^^$0|@$1|2|3|4|5|6|7|J|8|@$9|K|A|L|B|C]|$9|M|A|N|B|C]|$9|O|A|P|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|Q|8|@]|D|@]|E|$]]|$1|H|3|-4|5|6|7|R|8|@]|D|@]|E|$]]]|I|$]]

I think maybe you installed redis by source code.If that you need locate to redis-source-code-path/utils and run <code>sudo install_server.sh</code> command.
After that, make sure redis-server has been running as a service for your system
<code>sudo service redis-server status</code>

PS: based on Debian/Ubuntu

blocks|key|472388|text|在ubuntu的情况下，错误是由于没有设置redis-server。再次安装redis-server，然后检查状态。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|472389|如果没有错误，则会显示如下消息:-|472390|redis-server.service+-高级键值存储已加载:已加载(/lib/systemd/system/redis-server.service；已启用；供应商预设:已启用)+Active:+active+(运行)自Wed+2018-01-17+20:07:27+IST；16s前文档：http://redis.io/documentation，man:redis服务器(1)主PID:+4327+(redis服务器)+CGroup:+/system.slice/redis-server.service└─4327+/usr/bin/redis-服务器127.0.0.1:6379|offset|length|472391|entityMap|0|LINK|mutability|MUTABLE|url|http://redis.io/documentation^0|0|0|43|T|0|0^^$0|@$1|2|3|4|5|6|7|P|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Q|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@$F|S|G|T|1|U]]|A|$]]|$1|H|3|-4|5|6|7|V|8|@]|9|@]|A|$]]]|I|$J|$5|K|L|M|A|$N|O]]]]

In case of ubuntu, the error is due to redis-server not being set up.
Install the redis-server again and then check for the status.

If there is no error, then a message like this would be displayed :-

● redis-server.service - Advanced key-value store
 Loaded: loaded (/lib/systemd/system/redis-server.service; enabled; vendor preset: enabled)
 Active: active (running) since Wed 2018-01-17 20:07:27 IST; 16s ago
 Docs: <a href="http://redis.io/documentation" rel="nofollow noreferrer">http://redis.io/documentation</a>,
 man:redis-server(1)
 Main PID: 4327 (redis-server)
 CGroup: /system.slice/redis-server.service
 └─4327 /usr/bin/redis-server 127.0.0.1:6379

blocks|key|688648|text|您必须先安装redis服务器；|type|unstyled|depth|inlineStyleRanges|entityRanges|data|688649|您可以按照以下步骤在mac上安装redis服务器-|688650|++$+curl+-O+http://download.redis.io/redis-stable.tar.gz
++$+tar+xzvf+redis-stable.tar.gz
++$+cd+redis-stable
++$+make
++$+make+test
++$+sudo+make+install
++$+redis-server|code-block|syntax|javascript|688651|祝好运。|688652|entityMap^0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|O|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|P|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|Q|8|@]|9|@]|A|$]]]|L|$]]

You have to install redis server first;

You can install redis server on mac by following step - 

<pre><code> $ curl -O http://download.redis.io/redis-stable.tar.gz
 $ tar xzvf redis-stable.tar.gz
 $ cd redis-stable
 $ make
 $ make test
 $ sudo make install
 $ redis-server
</code></pre>

Good luck.

blocks|key|472545|text|对我来说，我在Ubuntu18.x上遇到了这个问题，但我的问题是我的redis服务器运行在127.0.0.1上，但我发现我需要在我的IP地址xxx.xx.xx.xx上运行它|type|unstyled|depth|inlineStyleRanges|entityRanges|data|472546|我进入我的Ubuntu机器并执行了以下操作。|472547|cd+/etc/redis/|offset|length|style|CODE|472548|sudo+vim+redis.conf|472549|然后我编辑了这部分。|472550|##################################+NETWORK+#####################################

#+By+default,+if+no+"bind"+configuration+directive+is+specified,+Redis+listens
#+for+connections+from+all+the+network+interfaces+available+on+the+server.
#+It+is+possible+to+listen+to+just+one+or+multiple+selected+interfaces+using
#+the+"bind"+configuration+directive,+followed+by+one+or+more+IP+addresses.
#
#+Examples:
#
#+bind+192.168.1.100+10.0.0.1
#+bind+127.0.0.1+::1
#
#+~~~+WARNING+~~~+If+the+computer+running+Redis+is+directly+exposed+to+the
#+internet,+binding+to+all+the+interfaces+is+dangerous+and+will+expose+the
#+instance+to+everybody+on+the+internet.+So+by+default+we+uncomment+the
#+following+bind+directive,+that+will+force+Redis+to+listen+only+into
#+the+IPv4+loopback+interface+address+(this+means+Redis+will+be+able+to
#+accept+connections+only+from+clients+running+into+the+same+computer+it
#+is+running).le+to+listen+to+just+one+or+multiple+selected+interfaces+using
#
#+IF+YOU+ARE+SURE+YOU+WANT+YOUR+INSTANCE+TO+LISTEN+TO+ALL+THE+INTERFACES
#+JUST+COMMENT+THE+FOLLOWING+LINE.
#+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#+bind+127.0.0.1+::1+10.0.0.1
bind+127.0.0.1+::1+#+<<--------+change+this+to+what+your+iP+address+is+something+like+(bind+192.168.2.2)|code-block|syntax|javascript|472551|保存该文件，然后重新启动redis-server。|472552|sudo+service+redis-server+restart或只需运行redis-server|472553|entityMap^0|0|0|0|E|0|0|J|0|0|0|0|0|X|12|C|0^^$0|@$1|2|3|4|5|6|7|Y|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|Z|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|10|8|@$F|11|G|12|H|I]]|9|@]|A|$]]|$1|J|3|K|5|6|7|13|8|@$F|14|G|15|H|I]]|9|@]|A|$]]|$1|L|3|M|5|6|7|16|8|@]|9|@]|A|$]]|$1|N|3|O|5|P|7|17|8|@]|9|@]|A|$Q|R]]|$1|S|3|T|5|6|7|18|8|@]|9|@]|A|$]]|$1|U|3|V|5|6|7|19|8|@$F|1A|G|1B|H|I]|$F|1C|G|1D|H|I]]|9|@]|A|$]]|$1|W|3|-4|5|6|7|1E|8|@]|9|@]|A|$]]]|X|$]]

For me I had this issue on Ubuntu 18.x, but my problem was that my redis-server was running on 127.0.0.1 but I found out I needed to run it on my IP address xxx.xx.xx.xx
I went into my Ubuntu machine and did the following.
<code>cd /etc/redis/</code>
<code>sudo vim redis.conf</code>
Then I edited this part.
<pre><code>################################## NETWORK #####################################

# By default, if no &quot;bind&quot; configuration directive is specified, Redis listens
# for connections from all the network interfaces available on the server.
# It is possible to listen to just one or multiple selected interfaces using
# the &quot;bind&quot; configuration directive, followed by one or more IP addresses.
#
# Examples:
#
# bind 192.168.1.100 10.0.0.1
# bind 127.0.0.1 ::1
#
# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the
# internet, binding to all the interfaces is dangerous and will expose the
# instance to everybody on the internet. So by default we uncomment the
# following bind directive, that will force Redis to listen only into
# the IPv4 loopback interface address (this means Redis will be able to
# accept connections only from clients running into the same computer it
# is running).le to listen to just one or multiple selected interfaces using
#
# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
# JUST COMMENT THE FOLLOWING LINE.
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# bind 127.0.0.1 ::1 10.0.0.1
bind 127.0.0.1 ::1 # &lt;&lt;-------- change this to what your iP address is something like (bind 192.168.2.2)

</code></pre>
Save that, and then restart redis-server.
<code>sudo service redis-server restart</code> or simply run <code>redis-server</code>

blocks|key|688400|text|你和redis的连接失败了。尝试重新启动redis服务器，然后通过运行以下3个命令重新启动客户端：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|688401|sudo+service+redis-server+restart
redis-server
redis-cli|code-block|syntax|javascript|688402|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

Your connection to redis is failing. Try restarting your redis server, then starting up your client again by running these 3 commands:

<pre><code>sudo service redis-server restart
redis-server
redis-cli
</code></pre>

blocks|key|471915|text|请尝试将节点升级到最新版本。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|471916|sudo+npm+cache+clean+-f
sudo+npm+install+-g+n
sudo+n+stable|code-block|syntax|javascript|471917|0.4版可能无法正常工作。|471918|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|L|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|M|8|@]|9|@]|A|$]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

Try upgrading your node to latest version.

<pre><code>sudo npm cache clean -f
sudo npm install -g n
sudo n stable
</code></pre>

version 0.4 may not work properly.

I working with node.js by expressjs I try to store an account to session. So, i try to test to use session with code in <a href="http://expressjs.com/guide.html">expressjs</a>

<pre><code>var RedisStore = require('connect-redis')(express);
app.use(express.bodyParser());
app.use(express.cookieParser());
app.use(express.session({ secret: "keyboard cat", store: new RedisStore }));
</code></pre>

but I got error <code>Redis connection to 127.0.0.1:6379 failed - connect ECONNREFUSED</code>. Please help me resolve this problem

Redis connection to 127.0.0.1:6379 failed - connect ECONNREFUSED

服务器

Windows

Docker

Ubuntu

Debian

Redis

我使用expressjs使用node.js我尝试将一个帐户存储到会话中。因此，我尝试使用中的代码来测试使用会话var RedisStore = require('connect-redis')(express);app.use(express.bodyParser());app.use(express.cookieParser());app.use(express.session({ secret

问Redis连接到127.0.0.1:6379失败- connect ECONNREFUSED
EN

回答 16

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Redis连接到127.0.0.1:6379失败- connect ECONNREFUSEDEN

回答 16

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

资源

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问Redis连接到127.0.0.1:6379失败- connect ECONNREFUSED
EN