blocks|key|2176249|text|获取根本原因的最好方法是检查SERVICE_STATUS_PROCESS.dwCheckPoint值。您的服务会在处于START_PENDING状态时对其进行更新，并且使用sc+query可以从命令行对其进行轮询。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|2176250|entityMap^0|2E|8|0^^$0|@$1|2|3|4|5|6|7|H|8|@$9|I|A|J|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|K|8|@]|D|@]|E|$]]]|G|$]]

The best way to get the root cause would be to check the SERVICE_STATUS_PROCESS.dwCheckPoint value. Your service is updating that while it's in state START_PENDING, and with <code>sc query</code> you can poll it from the command line.

blocks|key|3123091|text|请注意，如果您在启动服务时执行了较长的操作，则错误可能来自于此。SC等待30秒，等待启动操作完成，然后报告失败。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3123092|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Please note that if you perform a long operation when you start the service, the error might be from that. SC waits 30 seconds for the starting operation to complete, then reports a failure.

blocks|key|3123118|text|调试服务很困难。现在，我更喜欢编写一个类库来完成所有的工作，一个服务只调用类库中的一个方法，还有一个测试工具(通常是控制台应用程序)来调用相同的方法。这样，我就可以在调试器中运行测试工具，并消除大多数错误。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3123119|当你的服务不能启动时，你会收到两条消息，一条是你刚刚得到的消息，另一条是"it+started，then+stopped“，这通常意味着它抛出了一个异常。如果你正在写一个“醒来看看现在是不是已经午夜了”之类的服务，你的代码通常意味着一个坏的循环或者过长的睡眠。但实际上，从测试工具在调试器下运行它是了解正在发生的事情的最好方法。|3123120|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Debugging services is hard. These days I prefer to write a class library that does all the work, a service that just calls one method of the class library, and a test harness (usually a console app) that calls the same method. That way I can run the test harness in the debugger and get most of the errors out of the way. 

The two messages you tend to get when your service won't start are the one you just got and the "it started but then stopped" one, which usually means it threw an exception. Yours usually implies a bad loop or an overly long sleep if you're writing a "wake up and see if it's midnight yet" kind of service. But really, running it under the debugger from a test harness is the best way to gain insight into what's happening.

blocks|key|3123144|text|这篇文章是很久以前的事了，但我写这篇文章是为了那些正在寻找修复方法的未来程序员。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|3123145|我也遇到了同样的问题，我花了几个小时弄清楚问题出在哪里。|3123146|错误消息：|3123147|3123148|服务没有....|blockquote|3123149|3123150|3123151|当通过SERVICE_TABLE_ENTRY传递给StartServiceCtrlDispatcherW的main函数在尝试运行您的服务后立即返回时，可能会导致此问题。|offset|length|style|CODE|3123152|除非SC告诉它停止，否则不应该返回SC运行的main函数。|3123153|代码如下所示：|3123154|void+CServiceManager::Start(DWORD+_dwArgc,+LPWSTR+*+_argv)
{
++++//+Your+performing+code.
++++//+....

++++::SetServiceStatus(SERVICE_RUNNING);+//+Roughly

++++//+Prevent+CServiceManager::Start+from+returning.
++++::WaitForSingleObject(YourExitEvent,+0);+
}|code-block|syntax|javascript|3123155|此外，您不应该忘记在退出代码中传递SERVICE_STOPPPED和调用SetEvent。|3123156|entityMap^0|0|0|0|0|0|0|0|3|J|P|R|0|0|0|0|H|G|10|8|0^^$0|@$1|2|3|4|5|6|7|14|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|15|8|@]|9|@]|A|$]]|$1|D|3|E|5|6|7|16|8|@]|9|@]|A|$]]|$1|F|3|-4|5|6|7|17|8|@]|9|@]|A|$]]|$1|G|3|H|5|I|7|18|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|19|8|@]|9|@]|A|$]]|$1|K|3|-4|5|6|7|1A|8|@]|9|@]|A|$]]|$1|L|3|M|5|6|7|1B|8|@$N|1C|O|1D|P|Q]|$N|1E|O|1F|P|Q]]|9|@]|A|$]]|$1|R|3|S|5|6|7|1G|8|@]|9|@]|A|$]]|$1|T|3|U|5|6|7|1H|8|@]|9|@]|A|$]]|$1|V|3|W|5|X|7|1I|8|@]|9|@]|A|$Y|Z]]|$1|10|3|11|5|6|7|1J|8|@$N|1K|O|1L|P|Q]|$N|1M|O|1N|P|Q]]|9|@]|A|$]]|$1|12|3|-4|5|6|7|1O|8|@]|9|@]|A|$]]]|13|$]]

This post is a long time ago but I'm writing this for the future programmers who would be looking for a way to fix.

I had the same problem and spent a few hours figuring out what was the problem.

The error message:

<blockquote>
 The service did not....
</blockquote>

can be caused when the main function, which is passed to <code>StartServiceCtrlDispatcherW</code> through <code>SERVICE_TABLE_ENTRY</code>, gets returned right after trying to run your service.

The main function that SC runs should not be returned unless SC tells it to stop.

The code would be as follows:

<pre><code>void CServiceManager::Start(DWORD _dwArgc, LPWSTR * _argv)
{
 // Your performing code.
 // ....

 ::SetServiceStatus(SERVICE_RUNNING); // Roughly

 // Prevent CServiceManager::Start from returning.
 ::WaitForSingleObject(YourExitEvent, 0); 
}
</code></pre>

Also you shouldn't forget to pass <code>SERVICE_STOPPPED</code> and invoke <code>SetEvent</code> in the exit code.

blocks|key|268331|text|当我使用原始的MinGW+(旧的)编译windows服务时，我遇到了这个问题。这个问题只需切换到最新的MinGW-64即可解决|type|unstyled|depth|inlineStyleRanges|entityRanges|data|268332|编辑:事实证明，这只是一个服务没有找到所需的mingw+DLL的问题。使用-static标志进行编译也解决了这个问题|268333|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

I had this problem when I was compiling the windows service using the original MinGW (the old one). 
The problem was solved by simply switching to the latest MinGW-64

EDIT: It turned out it was simply an issue with the service not finding the required mingw DLLs. Compiling with the -static flag also solved the issue

I have created a service in win32,c++ . I am able to create the service , but when I try to start it, it gives following error.

[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.

What is the best way to get to the root cause, since this error message is not conveying anything meaningful

The service did not respond to the start or control request in a timely fashion

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我已经在win32中创建了一个服务c++。我可以创建服务，但当我尝试启动它时，它给出了以下错误。SC StartService失败1053:服务未及时响应启动或控制请求。既然此错误消息没有传达任何有意义的信息，那么找出根本原因的最佳方法是什么

问服务未及时响应启动或控制请求
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问服务未及时响应启动或控制请求EN