blocks|key|1496130|text|是的，你进入分析设置，编辑你的网站，并%2B添加筛选器，以定义一个筛选器，排除您的IP地址。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1496131|过去的数据不会在应用过滤器的情况下重新生成，因此您只会从向前移动中获得好处。|1496132|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|F|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|G|8|@]|9|@]|A|$]]|$1|D|3|-4|5|6|7|H|8|@]|9|@]|A|$]]]|E|$]]

Yeah, you go into Analytics Settings, edit your site, and +Add Filter to define a filter that excludes your IP address.

Past data is not regenerated with filters applied, so you'll only have the benefit of them moving forward.

blocks|key|1266172|text|如果你在NAT后面或者因为其他原因你不能给谷歌分析你的IP，那么最简单的方法是将谷歌分析域设置为localhost+(127.0.0.1)，从现在开始当你打开浏览器时，所有对谷歌分析的请求都将被定向到你的工作站，而不需要知道谷歌分析。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1266173|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

If You are behind NAT or You can't for other reason give Your IP to Google Analytics, then the simplest method is to set the google analytics domain to localhost (127.0.0.1), from now when You open Your browser, all request to Google Analytics will be directed to Your working station, without knowledge of Google Analytics.

blocks|key|1496166|text|如果您不使用静态IP，在GA上设置IP过滤器对您没有帮助。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1496167|设置环境变量并有条件地显示它。以下面的Ruby+on+Rails代码为例：|1496168|<%25+unless+RAILS_ENV+==+"development"+%25>
++++
<%25+end+%25>|code-block|syntax|javascript|1496169|您可以将此行为扩展到您在任何操作系统上使用的每种语言/框架。在PHP上，您可以使用getenv函数。请查看Environment+Variables上的维基百科页面，了解如何在您的系统上进行操作。|offset|length|1496170|entityMap|0|LINK|mutability|MUTABLE|url|http://php.net/getenv|1|http://en.wikipedia.org/wiki/Environment_variable^0|0|0|0|15|6|0|1H|L|1|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|X|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|Z|8|@]|9|@$K|10|L|11|1|12]|$K|13|L|14|1|15]]|A|$]]|$1|M|3|-4|5|6|7|16|8|@]|9|@]|A|$]]]|N|$O|$5|P|Q|R|A|$S|T]]|U|$5|P|Q|R|A|$S|V]]]]

If you're not using static IP, setting IP filters on GA can't help you.

Set an environment variable and conditionally display it. Take the following Ruby on Rails code, for instance:

<pre><code>&lt;% unless RAILS_ENV == "development" %&gt;
 &lt;!-- your GA code --&gt;
&lt;% end %&gt;
</code></pre>

You can extend this behavior every language/framework you use on any operating system. On PHP, you can use the <a href="http://php.net/getenv" rel="noreferrer">getenv</a> function. Check it out the Wikipedia page on <a href="http://en.wikipedia.org/wiki/Environment_variable" rel="noreferrer">Environment Variables</a> to know how to proceed on your system.

blocks|key|1498127|text|可能对您没有帮助，但是我通过编写一个注入所需JavaScript的自定义ASP.NET服务器控件解决了这个问题。然后，我将活动的URL添加到web.config中，然后仅当主机名与web.config中的活动的URL匹配时，才使控件可见。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1498128|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

Probably not helpful to you, but I solved this problem by writing a custom ASP.NET server control that injects the required JavaScript. I then added the live URL to web.config and then only made the control visible when the host name matched the live URL in web.config.

blocks|key|196489|text|我使用的是火狐的广告拦截器，它可以专门拦截谷歌分析跟踪脚本。因为firefox是我的主要开发浏览器，所以在我需要在其他浏览器中测试我的工作之前，它工作得很好。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|196490|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

I use Ad Blocker for Firefox, it can specifically block the Google analytics tracking script. Since firefox is my primary development browser it works great until i need to test my work in other browsers.

blocks|key|1266290|text|获取请求主机变量。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1266291|因此，将if语句包装在分析javascript周围，如下所示(Ruby风格的伪代码)：|1266292|<body>
<shtuff>dfsfsdf</shtuff>
if+not+(request.host+==+'localhost')
++#analytics+code+here
elsif+(request.host+==+the+server's+ip/domain)
++#analytics+code+here
else
++#do+nothing
end
</body>|code-block|syntax|javascript|1266293|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

get the request host variable. 

So wrap an if statement around the analytics javascript like this (Ruby-esque pseudocode):

<pre><code>&lt;body&gt;
&lt;shtuff&gt;dfsfsdf&lt;/shtuff&gt;
if not (request.host == 'localhost')
 #analytics code here
elsif (request.host == the server's ip/domain)
 #analytics code here
else
 #do nothing
end
&lt;/body&gt;
</code></pre>

blocks|key|1266340|text|正如人们提到的，您可以在本地托管google-analytics.com域，也可以设置一个函数来查看您是否在您的开发网络中工作。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1266341|请记住，如果http://www.google-analytics.com/ga.js没有加载，您可以使用onclick+javascript函数来帮助跟踪页面元素上的点击。|offset|length|1266342|即:+onclick="javascript:pageTracker._trackPageview('/made/up/folder/reference')；|1266343|您将会遇到JavaScript错误，这些错误会导致jQuery或其他健壮的JavaScript函数无法正常工作。|1266344|entityMap|0|LINK|mutability|MUTABLE|url|http://www.google-analytics.com/ga.js^0|0|6|11|0|0|0|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@]|9|@$D|T|E|U|1|V]]|A|$]]|$1|F|3|G|5|6|7|W|8|@]|9|@]|A|$]]|$1|H|3|I|5|6|7|X|8|@]|9|@]|A|$]]|$1|J|3|-4|5|6|7|Y|8|@]|9|@]|A|$]]]|K|$L|$5|M|N|O|A|$P|Q]]]]

Like people are mentioning you can either host the google-analytics.com domain locally or setup a function to see if you are working in your development network.

Keep in mind if <a href="http://www.google-analytics.com/ga.js" rel="nofollow noreferrer">http://www.google-analytics.com/ga.js</a> does not load and your using onclick javascript functions to help track clicks on page elements. 

IE:
onclick="javascript:pageTracker._trackPageview('/made/up/folder/reference');

Your going to have JavaScript errors that will stop jQuery or other robust JavaScript functions from functioning.

blocks|key|1266389|text|我们为开发和QA工作设置了第二个google分析跟踪代码--当您想要测试您的分析集成时，实际上会派上用场，同时还确保不会泄漏到生产统计数据中。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1266390|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|D|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|E|8|@]|9|@]|A|$]]]|C|$]]

We setup a 2nd google analytics tracking code for development and QA work -- actually comes in handy when you want to test your analytics integration, also ensures one doesn't have bleedover into production stats.

blocks|key|1266424|text|我喜欢使用javascript这种简单的方法。它适用于任何地方。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1266425|<script+type="text/javascript">
if+(document.location.hostname.search("myproductiondomainname.com")+!==+-1)+{

//google+analytics+code+goes+here

}
</script>|code-block|syntax|javascript|1266426|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

I like the simple approach of using javascript. It works anywhere.

<pre><code>&lt;script type="text/javascript"&gt;
if (document.location.hostname.search("myproductiondomainname.com") !== -1) {

//google analytics code goes here

}
&lt;/script&gt;
</code></pre>

blocks|key|4482918|text|有一些Chrome扩展可以帮你做到这一点，比如https://chrome.google.com/webstore/detail/fadgflmigmogfionelcpalhohefbnehm|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4482919|如果您的IP地址不是静态的，则非常方便。|4482920|entityMap|0|LINK|mutability|MUTABLE|url|https://chrome.google.com/webstore/detail/fadgflmigmogfionelcpalhohefbnehm^0|N|22|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

There are a few Chrome extensions that do this for you, like <a href="https://chrome.google.com/webstore/detail/fadgflmigmogfionelcpalhohefbnehm" rel="noreferrer">https://chrome.google.com/webstore/detail/fadgflmigmogfionelcpalhohefbnehm</a>

Very convenient if your IP address is not static.

blocks|key|1498270|text|作为一个额外的选择，我有一个包含许多不同站点和开发人员的开发服务器。这意味着我对3个主要选项不是特别满意|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1498271|1498272|托管文件-这对许多开发人员来说是有问题的，并且在GA网站上的every+site+|unordered-list-item|1498273|if/else开发块上可能会出现人为错误-一些客户端有自己的GA帐户；必须在有可能成为etc|1498274|configuration的every+site上完成|offset|length|style|BOLD|1498275|1498276|1498277|我没有在这里实现其他答案中的各种选项，而是通过以下方式解决了这个问题。在全局修复(而不是站点特定的修复)中，我使用apache模块mod_substitute来模拟主机文件修复在另一个答案中的效果，但对于每个开发站点和每个开发人员都是自动的。|1498278|启用模块|1498279|CentOS：打开/etc/conf/httpd.conf并添加以下行|CODE|1498280|LoadModule+substitute_module+modules/mod_substitute.so|1498281|Ubuntu/Debian：运行以下命令|1498282|sudo+a2enmod+substitute|1498283|启用模块后，将以下行添加到httpd全局配置文件中|1498284|CentOS：/etc/conf/httpd.conf|1498285|Ubuntu/Debian：/etc/apache2/httpd.conf|1498286|#+Break+Google+Analytics
AddOutputFilterByType+SUBSTITUTE+text/html+
Substitute+"s%7C.google-analytics.com%7C.127.0.0.1%7Cn"|code-block|syntax|javascript|1498287|然后重新启动apache|1498288|CentOS：service+httpd+restart|1498289|Ubuntu/Debian：/etc/init.d/apache2+restart|1498290|这样做的目的是在apache提供页面时将所有匹配.google-analytics.com的文本替换为.127.0.0.1，以便您的页面使用类似于以下示例的分析代码呈现|1498291|var+_gaq+=+_gaq+%7C%7C+[];
_gaq.push(['_setAccount',+'']);
_gaq.push(['_trackPageview']);

(function()+{
++++var+ga+=+document.createElement('script');+ga.type+=+'text/javascript';+ga.async+=+true;
++++ga.src+=+('https:'+==+document.location.protocol+?+'https://ssl'+:+'http://www')+%2B+'.127.0.0.1/ga.js';
++++var+s+=+document.getElementsByTagName('script')[0];+s.parentNode.insertBefore(ga,+s);
})();|1498292|entityMap|0|LINK|mutability|MUTABLE|url|http://httpd.apache.org/docs/2.2/mod/mod_substitute.html^0|0|0|1|1|E|A|1|0|0|1T|E|0|0|0|0|6|9|K|0|0|1I|0|0|D|0|0|N|0|0|0|6|7|K|0|0|D|E|N|0|0|0|0|6|7|L|0|0|D|E|R|0|0|0^^$0|@$1|2|3|4|5|6|7|1V|8|@]|9|@]|A|$]]|$1|B|3|-4|5|6|7|1W|8|@]|9|@]|A|$]]|$1|C|3|D|5|E|7|1X|8|@]|9|@]|A|$]]|$1|F|3|G|5|E|7|1Y|8|@]|9|@]|A|$]]|$1|H|3|I|5|E|7|1Z|8|@$J|20|K|21|L|M]]|9|@]|A|$]]|$1|N|3|-4|5|6|7|22|8|@]|9|@]|A|$]]|$1|O|3|-4|5|6|7|23|8|@]|9|@]|A|$]]|$1|P|3|Q|5|6|7|24|8|@]|9|@$J|25|K|26|1|27]]|A|$]]|$1|R|3|S|5|6|7|28|8|@]|9|@]|A|$]]|$1|T|3|U|5|6|7|29|8|@$J|2A|K|2B|L|M]|$J|2C|K|2D|L|V]]|9|@]|A|$]]|$1|W|3|X|5|6|7|2E|8|@$J|2F|K|2G|L|V]]|9|@]|A|$]]|$1|Y|3|Z|5|6|7|2H|8|@$J|2I|K|2J|L|M]]|9|@]|A|$]]|$1|10|3|11|5|6|7|2K|8|@$J|2L|K|2M|L|V]]|9|@]|A|$]]|$1|12|3|13|5|6|7|2N|8|@]|9|@]|A|$]]|$1|14|3|15|5|6|7|2O|8|@$J|2P|K|2Q|L|M]|$J|2R|K|2S|L|V]]|9|@]|A|$]]|$1|16|3|17|5|6|7|2T|8|@$J|2U|K|2V|L|M]|$J|2W|K|2X|L|V]]|9|@]|A|$]]|$1|18|3|19|5|1A|7|2Y|8|@]|9|@]|A|$1B|1C]]|$1|1D|3|1E|5|6|7|2Z|8|@]|9|@]|A|$]]|$1|1F|3|1G|5|6|7|30|8|@$J|31|K|32|L|M]|$J|33|K|34|L|V]]|9|@]|A|$]]|$1|1H|3|1I|5|6|7|35|8|@$J|36|K|37|L|M]|$J|38|K|39|L|V]]|9|@]|A|$]]|$1|1J|3|1K|5|6|7|3A|8|@]|9|@]|A|$]]|$1|1L|3|1M|5|1A|7|3B|8|@]|9|@]|A|$1B|1C]]|$1|1N|3|-4|5|6|7|3C|8|@]|9|@]|A|$]]]|1O|$1P|$5|1Q|1R|1S|A|$1T|1U]]]]

Just as an additional option for this, I have a development server with lots of different sites and developers. This meant that I wasn't particularly happy with the 3 main options

<ul>
<li>hosts file- problematic with lots of developers and open to human error</li>
<li>if/else development block on every site etc</li>
<li>configuration on GA website - some clients have their own GA accounts; would have to be completed on every site with the potential to be forgotten/overlooked</li>
</ul>

Rather than implementing the various options in the other answers here I approached the problem in the following way. In the global httpd.conf (rather than a site specific one) I used the apache module <a href="http://httpd.apache.org/docs/2.2/mod/mod_substitute.html" rel="nofollow">mod_substitute</a> to simulate the effect the hosts file fix in another answer has, but for every development site, and every developer automatically.

Enable the module

CentOS: Open <code>/etc/conf/httpd.conf</code> and add the following line

<code>LoadModule substitute_module modules/mod_substitute.so</code>

Ubuntu/Debian: Run the following command

<code>sudo a2enmod substitute</code>

Once you've got the module enabled add the following lines to your httpd global config file

CentOS: <code>/etc/conf/httpd.conf</code>

Ubuntu/Debian: <code>/etc/apache2/httpd.conf</code>

<pre><code># Break Google Analytics
AddOutputFilterByType SUBSTITUTE text/html 
Substitute "s|.google-analytics.com|.127.0.0.1|n"
</code></pre>

Then restart apache

CentOS: <code>service httpd restart</code>

Ubuntu/Debian: <code>/etc/init.d/apache2 restart</code>

What this does is replace all text matching .google-analytics.com with .127.0.0.1 when apache serves the page so your page renders with analytics code similar to the below example

<pre><code>var _gaq = _gaq || [];
_gaq.push(['_setAccount', '']);
_gaq.push(['_trackPageview']);

(function() {
 var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
 ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.127.0.0.1/ga.js';
 var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
})();
</code></pre>

blocks|key|4483058|text|现在是2014年了，我仍然对所有现有的解决方案都不满意...|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|4483059|4483060|IP筛选器需要静态IP地址。如果我在家里或咖啡厅工作怎么办？|unordered-list-item|4483061|检查主机名可以消除开发环境中的点击，但如果我正在调试实时站点怎么办？|4483062|编辑服务器配置很烦人/高级，并且多个域是complicated.|4483063|Opt-Out扩展，要么阻止所有网站上的点击，要么根本不阻止。|4483064|4483065|所以，我创建了自己的浏览器扩展...https://chrome.google.com/webstore/detail/lknhpplgahpbindnnocglcjonpahfikn|4483066|4483067|It跟随我无论我去哪里|4483068|它在开发环境和实时/公共域上工作|4483069|它只影响我和我所在的站点只需单击|4483070|即可打开/关闭|4483071|很容易验证它是否真的没有发送任何数据到analytics|4483072|<代码>F224|4483073|它的工作原理是在你的机器上一直为你选择的域名设置一个“开发者cookie”。然后，在将任何数据发送到Analytics之前，您只需在脚本中检查此cookie。您可以在扩展的设置中为cookie自定义自己的唯一名称和值。一组人可以很容易地使用它，因此开发人员、内容创建者、校对员和组织中的其他任何人都可以查看页面，而不会夸大统计数据。|4483074|如何将代码放入您的页面的示例...|4483075|JavaScript|4483076|if+(window.location.host==="mydomain.com"+%7C%7C+window.location.host==="www.mydomain.com")+{
+++if+(document.cookie.indexOf("COOKIENAME=COOKIEVALUE")+===+-1)+{
++++++//+Insert+Analytics+Code+Here
+++}
}|code-block|syntax|javascript|4483077|PHP|4483078|if+($_SERVER['HTTP_HOST']==="mydomain.com"+%7C%7C+$_SERVER['HTTP_HOST']==="www.mydomain.com")+{
+++if+(@$_COOKIE["COOKIENAME"]+!==+"COOKIEVALUE")+{
++++++//+Insert+Analytics+Code+Here
+++}
}|4483079|验证主机名是否等于活动站点的域("mydomain.com")可确保在从测试域(如"localhost“或"beta.mydomain.com”)查看时，任何访问者都不会发送分析数据。在上面的示例中，"www.mydomain.com“和"mydomain.com”是我们希望记录访问记录的两个有效域。|4483080|除非找到具有匹配值的开发人员cookie，否则实时站点会按预期将数据发送到分析。如果它看到你的设备上设置了那个独特的cookie，那么你的访问将不会计入你在Google+Analytics或任何其他你喜欢使用的分析工具中的总数。|4483081|请随时分享我的解决方案，并使用我的扩展来保留这些cookie设置。|4483082|entityMap|0|LINK|mutability|MUTABLE|url|https://chrome.google.com/webstore/detail/lknhpplgahpbindnnocglcjonpahfikn^0|0|U|0|0|0|0|0|0|0|I|22|0|0|0|0|0|0|0|0|0|0|0|0|A|0|0|0|3|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|1Y|8|@$9|1Z|A|20|B|C]]|D|@]|E|$]]|$1|F|3|-4|5|6|7|21|8|@]|D|@]|E|$]]|$1|G|3|H|5|I|7|22|8|@]|D|@]|E|$]]|$1|J|3|K|5|I|7|23|8|@]|D|@]|E|$]]|$1|L|3|M|5|I|7|24|8|@]|D|@]|E|$]]|$1|N|3|O|5|I|7|25|8|@]|D|@]|E|$]]|$1|P|3|-4|5|6|7|26|8|@]|D|@]|E|$]]|$1|Q|3|R|5|6|7|27|8|@]|D|@$9|28|A|29|1|2A]]|E|$]]|$1|S|3|-4|5|6|7|2B|8|@]|D|@]|E|$]]|$1|T|3|U|5|I|7|2C|8|@]|D|@]|E|$]]|$1|V|3|W|5|I|7|2D|8|@]|D|@]|E|$]]|$1|X|3|Y|5|I|7|2E|8|@]|D|@]|E|$]]|$1|Z|3|10|5|I|7|2F|8|@]|D|@]|E|$]]|$1|11|3|12|5|I|7|2G|8|@]|D|@]|E|$]]|$1|13|3|14|5|6|7|2H|8|@]|D|@]|E|$]]|$1|15|3|16|5|6|7|2I|8|@]|D|@]|E|$]]|$1|17|3|18|5|6|7|2J|8|@]|D|@]|E|$]]|$1|19|3|1A|5|6|7|2K|8|@$9|2L|A|2M|B|C]]|D|@]|E|$]]|$1|1B|3|1C|5|1D|7|2N|8|@]|D|@]|E|$1E|1F]]|$1|1G|3|1H|5|6|7|2O|8|@$9|2P|A|2Q|B|C]]|D|@]|E|$]]|$1|1I|3|1J|5|1D|7|2R|8|@]|D|@]|E|$1E|1F]]|$1|1K|3|1L|5|6|7|2S|8|@]|D|@]|E|$]]|$1|1M|3|1N|5|6|7|2T|8|@]|D|@]|E|$]]|$1|1O|3|1P|5|6|7|2U|8|@]|D|@]|E|$]]|$1|1Q|3|-4|5|6|7|2V|8|@]|D|@]|E|$]]]|1R|$1S|$5|1T|1U|1V|E|$1W|1X]]]]

It's 2014 and I'm still unsatisfied with all existing solutions...

<ul>
<li>IP filters require a static IP address. What if I'm working from home or from a coffee shop?</li>
<li>Checking host name eliminates hits from a dev environment, but what if I'm debugging the live site?</li>
<li>Editing server configurations is annoying/advanced and multiple domains are complicated.</li>
<li>Opt-Out extensions either block hits on all websites or none at all depending on who you ask.</li>
</ul>

So, I created my own Browser Extension...
<a href="https://chrome.google.com/webstore/detail/lknhpplgahpbindnnocglcjonpahfikn">https://chrome.google.com/webstore/detail/lknhpplgahpbindnnocglcjonpahfikn</a>

<ul>
<li>It follows me wherever I go</li>
<li>It works on a dev environment and on live/public domains</li>
<li>It only affects me and the sites that I'm developing</li>
<li>It turns on/off with one click</li>
<li>It's easy to verify that it is truly not sending any data to analytics</li>
</ul>

It works by keeping a "developer cookie" set on your machine at all times just for the domains that you choose. You then simply check for this cookie in your script before sending any data to Analytics. You customize your own unique NAME and VALUE for the cookies in the extension's settings. This can easily be used by a team of people, so developers, content creators, proofreaders, and anyone else in your organization can all view pages without inflating the statistics.

Examples of how to put the code into your pages...

JavaScript

<pre><code>if (window.location.host==="mydomain.com" || window.location.host==="www.mydomain.com") {
 if (document.cookie.indexOf("COOKIENAME=COOKIEVALUE") === -1) {
 // Insert Analytics Code Here
 }
}
</code></pre>

PHP

<pre><code>if ($_SERVER['HTTP_HOST']==="mydomain.com" || $_SERVER['HTTP_HOST']==="www.mydomain.com") {
 if (@$_COOKIE["COOKIENAME"] !== "COOKIEVALUE") {
 // Insert Analytics Code Here
 }
}
</code></pre>

Verifying that the HOST name equals the domain of your live site ("mydomain.com") ensures that the analytics data will never be sent by ANY visitor while viewing from a test domain such as "localhost" or "beta.mydomain.com". In the examples above, "www.mydomain.com" and "mydomain.com" are the two valid domains where we DO want visits to be recorded.

The live site sends data to analytics as expected UNLESS a developer cookie is found with matching values. If it sees that unique cookie set on your device, then your visit will not count towards your totals in Google Analytics or whatever other analytics tool you prefer to use.

Feel free to share my solution and use my extension to keep those cookies set.

blocks|key|1266605|text|在运行Google+Analytics+async代码之前添加以下行，以禁用对该web属性ID的跟踪：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1266606|window['ga-disable-UA-XXXXXX-Y']+=+true;|code-block|syntax|javascript|1266607|UA-XXXXXX-Y对应于您要禁用其跟踪的web属性ID。|offset|length|style|CODE|1266608|来自：https://developers.google.com/analytics/devguides/collection/gajs/|1266609|entityMap|0|LINK|mutability|MUTABLE|url|https://developers.google.com/analytics/devguides/collection/gajs/^0|0|0|0|B|0|3|1U|0|0^^$0|@$1|2|3|4|5|6|7|W|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|X|8|@]|9|@]|A|$E|F]]|$1|G|3|H|5|6|7|Y|8|@$I|Z|J|10|K|L]]|9|@]|A|$]]|$1|M|3|N|5|6|7|11|8|@]|9|@$I|12|J|13|1|14]]|A|$]]|$1|O|3|-4|5|6|7|15|8|@]|9|@]|A|$]]]|P|$Q|$5|R|S|T|A|$U|V]]]]

Add this line before your Google Analytics async code runs to disable tracking for that web property ID:

<pre><code>window['ga-disable-UA-XXXXXX-Y'] = true;
</code></pre>

<code>UA-XXXXXX-Y</code> corresponds to the web property ID on which you would like to disable tracking.

From: <a href="https://developers.google.com/analytics/devguides/collection/gajs/" rel="noreferrer">https://developers.google.com/analytics/devguides/collection/gajs/</a>

blocks|key|1266645|text|我为我的本地开发设置了一个PHP变量，它为我提供了一个终端，用于在我工作时提供数据/反馈等。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1266646|我使用XAMPP，所以它有一个用于tmp的env变量，如下所示：|1266647|$isLocal+=+(getenv("tmp")+==+'\xampp\tmp')+?+true+:+false;|code-block|syntax|javascript|1266648|这在我的生产服务器上不存在，因为xampp没有被使用|1266649|if($isLocal){
++//+do+something,+eg.+load+my+terminal
}|1266650|..。具体到这个问题：|1266651|<?php+if(!$isLocal){+?>
++
<?php+}+//+end+google+analytics+local+check+?>|1266652|entityMap^0|0|0|0|0|0|0|0^^$0|@$1|2|3|4|5|6|7|S|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|T|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|U|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|V|8|@]|9|@]|A|$]]|$1|K|3|L|5|F|7|W|8|@]|9|@]|A|$G|H]]|$1|M|3|N|5|6|7|X|8|@]|9|@]|A|$]]|$1|O|3|P|5|F|7|Y|8|@]|9|@]|A|$G|H]]|$1|Q|3|-4|5|6|7|Z|8|@]|9|@]|A|$]]]|R|$]]

I have a PHP variable set for my local development that gives me a terminal for providing data/feedback etc when I'm working on stuff.

I use XAMPP so that has an env variable for tmp which is the following:

<pre><code>$isLocal = (getenv("tmp") == '\xampp\tmp') ? true : false;
</code></pre>

This doesn't exist on my production server because xampp is not being used

<pre><code>if($isLocal){
 // do something, eg. load my terminal
}
</code></pre>

... Specific to this question:

<pre><code>&lt;?php if(!$isLocal){ ?&gt;
 &lt;!-- Insert Google Analytics Script Here --&gt;
&lt;?php } // end google analytics local check ?&gt;
</code></pre>

blocks|key|4483164|text|您可以使用以下代码|type|unstyled|depth|inlineStyleRanges|entityRanges|data|4483165|<script>
var+host+=+window.location.hostname;
if(host+!=+"localhost")
{
++++//+your+google+analytic+code+here
}
</script>|code-block|syntax|javascript|4483166|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

You can use this code

<pre><code>&lt;script&gt;
var host = window.location.hostname;
if(host != "localhost")
{
 // your google analytic code here
}
&lt;/script&gt;
</code></pre>

blocks|key|4483276|text|解决方案是使用Google+Tag+Manager来处理你的Google+Analytics。这将允许您只在您的生产域上触发Google+Analytics，而不必在您的站点代码中编写任何条件。下面是如何做的：|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|4483277|在GTM中，设置一个仅当Page+Hostname包含您的生产域时触发的触发器。|4483278|​|4483279|📷|atomic|4483280|4483281|然后为Universal+Analytics设置一个标记，并将其触发器设置为您刚刚创建的触发器。|4483282|4483283|4483284|4483285|entityMap|0|LINK|mutability|MUTABLE|url|https://tagmanager.google.com/|1|IMAGE|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/6c576cbcc95fbe2ec439830462871519.png|imageAlt|2|https://ask.qcloudimg.com/http-save/yehe-900000/004ef08c5e2aa955c9299e53dbb35b59.png^0|7|I|0|0|0|0|0|1|1|0|0|0|0|0|1|2|0|0^^$0|@$1|2|3|4|5|6|7|16|8|@]|9|@$A|17|B|18|1|19]]|C|$]]|$1|D|3|E|5|6|7|1A|8|@]|9|@]|C|$]]|$1|F|3|G|5|6|7|1B|8|@]|9|@]|C|$]]|$1|H|3|I|5|J|7|1C|8|@]|9|@$A|1D|B|1E|1|1F]]|C|$]]|$1|K|3|G|5|6|7|1G|8|@]|9|@]|C|$]]|$1|L|3|M|5|6|7|1H|8|@]|9|@]|C|$]]|$1|N|3|G|5|6|7|1I|8|@]|9|@]|C|$]]|$1|O|3|I|5|J|7|1J|8|@]|9|@$A|1K|B|1L|1|1M]]|C|$]]|$1|P|3|G|5|6|7|1N|8|@]|9|@]|C|$]]|$1|Q|3|-4|5|6|7|1O|8|@]|9|@]|C|$]]]|R|$S|$5|T|U|V|C|$W|X]]|Y|$5|Z|U|10|C|$11|12|13|-4]]|14|$5|Z|U|10|C|$11|15|13|-4]]]]

The solution is to use <a href="https://tagmanager.google.com" rel="noreferrer">Google Tag Manager</a> (GTM) to handle your Google Analytics. This will allow you to only fire Google Analytics on your production domain without having to write any conditionals in your site's code. Here's how to do it:

In GTM, set a Trigger that only fires when the Page Hostname contains your production domain. 

<a href="https://i.stack.imgur.com/GMYtR.png" rel="noreferrer"><img src="https://i.stack.imgur.com/GMYtR.png" alt="enter image description here"></a>

Then set a Tag for Universal Analytics and make its Trigger the one you just created.

<a href="https://i.stack.imgur.com/QVtCN.png" rel="noreferrer"><img src="https://i.stack.imgur.com/QVtCN.png" alt="enter image description here"></a>

blocks|key|196772|text|今天，当我在一台和我自己的电脑不同的电脑上时，我注意到Chrome在默认情况下屏蔽了μAdSense。经过一些谷歌搜索，我找到了这个article。它还指出，默认情况下，μBlock+Origin+Firefox，μAdblock+for+Firefox和Ad+Muncher+for+Windows+block+AdSense。列出的大多数其他选项都可配置为阻止AdSense。|type|unstyled|depth|inlineStyleRanges|entityRanges|offset|length|data|196773|这似乎很有用，因为我的IP通常是动态的，所以只要我登录Chrome，Chrome扩展就可以跟踪我。|196774|entityMap|0|LINK|mutability|MUTABLE|url|https://analytical42.com/2016/ad-blockers-blocking-google-analytics/^0|1U|7|0|0|0^^$0|@$1|2|3|4|5|6|7|N|8|@]|9|@$A|O|B|P|1|Q]]|C|$]]|$1|D|3|E|5|6|7|R|8|@]|9|@]|C|$]]|$1|F|3|-4|5|6|7|S|8|@]|9|@]|C|$]]]|G|$H|$5|I|J|K|C|$L|M]]]]

Today, whilst on a different computer than my own, I noticed μBlock Origin for Chrome was blocking Google AdSense by default. After some Googling, I found this <a href="https://analytical42.com/2016/ad-blockers-blocking-google-analytics/" rel="nofollow noreferrer">article</a>. It notes also μBlock Origin Firefox, μ Adblock for Firefox and Ad Muncher for Windows block AdSense by default. Most other options are listed as being configurable to block AdSense.

This seems to work and is useful because my IP is often dynamic, so the Chrome extension can follow me around as long as I am logged in to Chrome.

blocks|key|1496663|text|使用过滤所有这些流量。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1496664|当你在你的应用中初始化GA时，设置一个自定义标志来跟踪开发：|1496665|//+In+your+header,+after+the+GA+code+is+injected
if(+<your_code_to_check_if_is_dev>+)+{
++ga('set',+'is_developer',+1+);
}|code-block|syntax|javascript|1496666|然后在您的GA帐户中添加筛选器以删除这些结果。|1496667|管理员>帐户>所有过滤器>添加过滤器>用户定义的|offset|length|style|BOLD|1496668|​|1496669|📷|atomic|1496670|1496671|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/a78a67e394f8b97ef0ee3b99525da750.png|imageAlt^0|0|0|0|0|0|O|0|0|0|1|0|0|0^^$0|@$1|2|3|4|5|6|7|15|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|16|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|17|8|@]|9|@]|A|$G|H]]|$1|I|3|J|5|6|7|18|8|@]|9|@]|A|$]]|$1|K|3|L|5|6|7|19|8|@$M|1A|N|1B|O|P]]|9|@]|A|$]]|$1|Q|3|R|5|6|7|1C|8|@]|9|@]|A|$]]|$1|S|3|T|5|U|7|1D|8|@]|9|@$M|1E|N|1F|1|1G]]|A|$]]|$1|V|3|R|5|6|7|1H|8|@]|9|@]|A|$]]|$1|W|3|-4|5|6|7|1I|8|@]|9|@]|A|$]]]|X|$Y|$5|Z|10|11|A|$12|13|14|-4]]]]

Use a <a href="https://support.google.com/analytics/answer/2709828?hl=en" rel="nofollow noreferrer">custom metric</a> to filter all this traffic.

When you init GA in your app, set a custom flag to track developres:

<pre><code>// In your header, after the GA code is injected
if( &lt;your_code_to_check_if_is_dev&gt; ) {
 ga('set', 'is_developer', 1 );
}
</code></pre>

Then add a filter in your GA Account to remove these results.

Admin > Account > All Filters > Add Filter > User Defined

<a href="https://i.stack.imgur.com/64OOH.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/64OOH.png" alt="enter image description here"></a>

blocks|key|1496706|text|我知道这篇文章太老了，但是没有一个解决方案能满足我的需求。我不仅想从GA+(和FB)中删除开发工作，而且我还希望公司内的一些人不被计算在GA和FB中。因此，我想要一种相对简单的方法，让这些人在没有插件的情况下将自己排除在分析之外，或者排除域名ip+(当有笔记本的人在闲逛时)。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1496707|我创建了一个webpage，用户可以转到该the并单击链接以选择退出GA和FB跟踪。它会为站点放置一个cookie。然后我检查cookie以确定我们是否应该将数据发送给GA和FB。|offset|length|1496708|我最初是在一个名为Dahlia,+which+is+a+boutique+maker+of+items+for+Greek+Orthodox+Weddings+and+Baptisms的网站上设置的。|1496709|代码如下：|1496710|我在所有网页的页眉中放入了以下代码：|1496711|<script>
//put+in+your+google+analytics+tracking+id+below:
var+gaProperty+=+'UA-XXXXXXXX-X';

//+Disable+tracking+if+the+opt-out+cookie+exists.
var+disableStr+=+'ga-disable-'+%2B+gaProperty;
if+(document.cookie.indexOf(disableStr+%2B+'=true')+>+-1)+{
++window[disableStr]+=+true;
++window['ga-disable-UA-7870337-1']+=+true;++//This+disables+the+tracking+on+Weebly+too.
}+else+{
+++//put+in+your+facebook+tracking+id+below:
++fbq('init',+'YYYYYYYYYYYYYYY');
++fbq('track',+'PageView');
}
</script>|code-block|syntax|javascript|1496712|请务必在提供的空白处添加您的GA和FB跟踪in。这最初是为Weebly+(购物CMS)网站编写的。因此，如果你不在weebly上，你可以删除提到Weebly的那一行。|1496713|然后，我创建了一个新的webpage+called+"do-not-track"，标题中包含以下代码：|1496714|<script>
//put+in+your+own+google+analytics+tracking+id+below:
var+gaProperty+=+'UA-XXXXXXXX-X';
var+disableStr+=+'ga-disable-'+%2B+gaProperty;

//+Opt-out+function
function+gaOptout()+{
++document.cookie+=+disableStr+%2B+'=true;+expires=Thu,+31+Dec+2099+23:59:59+UTC;+path=/';
++window[disableStr]+=+true;
++gaOptoutCheck();
}

//+Check+Opt-out+function
function+gaOptoutCheck()+{
++++var+name+=+"ga-disable-"%2BgaProperty%2B"=";
++++var+ca+=+document.cookie.split(';');
++++var+found+=+"false";
++++for(var+i=0;+i<ca.length;+i%2B%2B)+{
++++++++var+c+=+ca[i];
++++++++while+(c.charAt(0)=='+')+c+=+c.substring(1);
++++++++if+(c.indexOf(name)+==+0)+found+=+"true";
++++}
++++if+(found+==+"true")+alert("Cookie+is+properly+installed");
++++else+alert("COOKIE+NOT+FOUND");
}
</script>|1496715|以及主体中的以下代码：|1496716|<a+href="javascript:gaOptout()">Click+here+to+opt-out+of+Google+and+Facebook+Analytics</a>
 
Please+visit+this+page+on+every+computer,+laptop,+phone,+tablet,+etc.+that+you+use;+
and+for+all+browser+you+use+on+each+of+those+devices.
 
If+you+ever+remove+cookies+from+browser,+you+will+need+to+repeat+this+process+for+that+browser.
 
<a+href="javascript:gaOptoutCheck()">
Click+to+check+if+cookie+is+set</a>
 |1496717|这是我的完整writeup+for+the+Weebly+site|1496718|希望这对某些人有帮助！|1496719|entityMap|0|LINK|mutability|MUTABLE|url|https://www.dahliaweddingsandbaptisms.com/do-not-track-me.html|1|https://www.dahliaweddingsandbaptisms.com/|2|3|http://blog.furnace-brook.com/2015/09/exclude-yourself-from-weebly-and-google.html^0|0|6|7|0|0|9|2B|1|0|0|0|0|0|B|T|2|0|0|0|0|6|R|3|0|0^^$0|@$1|2|3|4|5|6|7|1H|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|1I|8|@]|9|@$D|1J|E|1K|1|1L]]|A|$]]|$1|F|3|G|5|6|7|1M|8|@]|9|@$D|1N|E|1O|1|1P]]|A|$]]|$1|H|3|I|5|6|7|1Q|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|1R|8|@]|9|@]|A|$]]|$1|L|3|M|5|N|7|1S|8|@]|9|@]|A|$O|P]]|$1|Q|3|R|5|6|7|1T|8|@]|9|@]|A|$]]|$1|S|3|T|5|6|7|1U|8|@]|9|@$D|1V|E|1W|1|1X]]|A|$]]|$1|U|3|V|5|N|7|1Y|8|@]|9|@]|A|$O|P]]|$1|W|3|X|5|6|7|1Z|8|@]|9|@]|A|$]]|$1|Y|3|Z|5|N|7|20|8|@]|9|@]|A|$O|P]]|$1|10|3|11|5|6|7|21|8|@]|9|@$D|22|E|23|1|24]]|A|$]]|$1|12|3|13|5|6|7|25|8|@]|9|@]|A|$]]|$1|14|3|-4|5|6|7|26|8|@]|9|@]|A|$]]]|15|$16|$5|17|18|19|A|$1A|1B]]|1C|$5|17|18|19|A|$1A|1D]]|1E|$5|17|18|19|A|$1A|1B]]|1F|$5|17|18|19|A|$1A|1G]]]]

I know this post is super old, but none of the solutions met my needs. Not only did I want to remove dev work from GA (and FB), but I also wanted to have some folks within the company not be counted in GA and FB. So I wanted a relatively easy method for those folks to exclude themselves from analytics without a plugin, or ruling out a domain ip (as folks with laptops wander). 

I created a <a href="https://www.dahliaweddingsandbaptisms.com/do-not-track-me.html" rel="nofollow noreferrer">webpage</a> that users can go to and click a link to opt out of the GA and FB tracking. It places a cookie for the site. Then I check that cookie to determine if we should send data to GA and FB. 

I originally set this up on a site for called <a href="https://www.dahliaweddingsandbaptisms.com" rel="nofollow noreferrer">Dahlia, which is a boutique maker of items for Greek Orthodox Weddings and Baptisms</a>. 

Here's the code:

I put the following code in the header for all web pages:

<pre><code>&lt;script&gt;
//put in your google analytics tracking id below:
var gaProperty = 'UA-XXXXXXXX-X';

// Disable tracking if the opt-out cookie exists.
var disableStr = 'ga-disable-' + gaProperty;
if (document.cookie.indexOf(disableStr + '=true') &gt; -1) {
 window[disableStr] = true;
 window['ga-disable-UA-7870337-1'] = true; //This disables the tracking on Weebly too.
} else {
 //put in your facebook tracking id below:
 fbq('init', 'YYYYYYYYYYYYYYY');
 fbq('track', 'PageView');
}
&lt;/script&gt;
</code></pre>

Be sure to add your GA and FB tracking IDs in the spaces provided. This was originally written for a Weebly (shopping CMS) site. So if you are not on Weebly you can remove the line that mentions weebly.

Then I created a new <a href="https://www.dahliaweddingsandbaptisms.com/do-not-track-me.html" rel="nofollow noreferrer">webpage called "do-not-track"</a> with the following code in the header:

<pre><code>&lt;script&gt;
//put in your own google analytics tracking id below:
var gaProperty = 'UA-XXXXXXXX-X';
var disableStr = 'ga-disable-' + gaProperty;

// Opt-out function
function gaOptout() {
 document.cookie = disableStr + '=true; expires=Thu, 31 Dec 2099 23:59:59 UTC; path=/';
 window[disableStr] = true;
 gaOptoutCheck();
}

// Check Opt-out function
function gaOptoutCheck() {
 var name = "ga-disable-"+gaProperty+"=";
 var ca = document.cookie.split(';');
 var found = "false";
 for(var i=0; i&lt;ca.length; i++) {
 var c = ca[i];
 while (c.charAt(0)==' ') c = c.substring(1);
 if (c.indexOf(name) == 0) found = "true";
 }
 if (found == "true") alert("Cookie is properly installed");
 else alert("COOKIE NOT FOUND");
}
&lt;/script&gt;
</code></pre>

And the following code in the body:

<pre><code>&lt;a href="javascript:gaOptout()"&gt;Click here to opt-out of Google and Facebook Analytics&lt;/a&gt;
&lt;br&gt;&lt;br&gt;
Please visit this page on every computer, laptop, phone, tablet, etc. that you use; 
and for all browser you use on each of those devices.
&lt;br&gt;&lt;br&gt;
If you ever remove cookies from browser, you will need to repeat this process for that browser.
&lt;br&gt;&lt;br&gt;&lt;br&gt;
&lt;a href="javascript:gaOptoutCheck()"&gt;
Click to check if cookie is set&lt;/a&gt;
&lt;br&gt;&lt;br&gt;
</code></pre>

Here is my full <a href="http://blog.furnace-brook.com/2015/09/exclude-yourself-from-weebly-and-google.html" rel="nofollow noreferrer">writeup for the Weebly site</a>

Hope this helps somebody!

blocks|key|1498526|text|如果你有一个react应用程序，并且你已经弹出了该应用程序(这也可以用于CRA+)。您可以在index.html页面中使用下面的代码片段。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1498527|<script+type="text/javascript">
++if("%25NODE_ENV%25"==="production"){
++//your+analytics+code
++}|code-block|syntax|javascript|1498528|entityMap^0|1A|A|0|0^^$0|@$1|2|3|4|5|6|7|M|8|@$9|N|A|O|B|C]]|D|@]|E|$]]|$1|F|3|G|5|H|7|P|8|@]|D|@]|E|$I|J]]|$1|K|3|-4|5|6|7|Q|8|@]|D|@]|E|$]]]|L|$]]

If you have a react application and you have ejected the app(this could work for CRA as well). You can make use of the below code snippet in the <code>index.html</code> page.

<pre><code>&lt;script type="text/javascript"&gt;
 if("%NODE_ENV%"==="production"){
 //your analytics code
 }
</code></pre>

blocks|key|196888|text|要禁用本地主机命中，只需创建一个筛选器来排除本地主机。请转到管理->属性->视图设置执行此操作。查看下面的屏幕截图以获得一些帮助。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|196889|​|196890|📷|atomic|offset|length|196891|196892|如果你使用非静态IP访问，你可以使用Chrome扩展，比如Developer+Cookie，如果是你，你可以跳过运行谷歌分析代码。|196893|我个人不这样做，因为我使用了一个广告拦截器，它已经阻止了我的浏览器上的谷歌分析。|196894|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/7d9359a3e7e133658baf690e56605c92.png|imageAlt|1|LINK|MUTABLE|url|https://chrome.google.com/webstore/detail/developer-cookie/lknhpplgahpbindnnocglcjonpahfikn^0|0|0|0|1|0|0|0|T|G|1|0|0^^$0|@$1|2|3|4|5|6|7|11|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|12|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|13|8|@]|9|@$G|14|H|15|1|16]]|A|$]]|$1|I|3|C|5|6|7|17|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|18|8|@]|9|@$G|19|H|1A|1|1B]]|A|$]]|$1|L|3|M|5|6|7|1C|8|@]|9|@]|A|$]]|$1|N|3|-4|5|6|7|1D|8|@]|9|@]|A|$]]]|O|$P|$5|Q|R|S|A|$T|U|V|-4]]|W|$5|X|R|Y|A|$Z|10]]]]

To disable localhost hits, just create a filter to exclude localhost. Go to Admin -> Property -> View Settings to do so. Check the following screenshot for some help.

<a href="https://i.stack.imgur.com/K1DoR.png" rel="noreferrer"><img src="https://i.stack.imgur.com/K1DoR.png" alt="ga view exclude localhost"></a>

To disable production URL hits for yourself if you visit using a non-static IP, you can use a Chrome extension like <a href="https://chrome.google.com/webstore/detail/developer-cookie/lknhpplgahpbindnnocglcjonpahfikn" rel="noreferrer">Developer Cookie</a> to skip running the Google Analytics code if it's you.

I personally don't do this since I use an Ad Blocker which already blocks Google Analytics on my browser.

blocks|key|197182|text|不幸的是，当使用应用%2B网页属性类型的设置时，似乎不可能从报告中排除localhost：|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|CODE|entityRanges|data|197183|仅为web属性显示过滤器的|197184|。筛选器无法应用于App+%2B+Web属性。|blockquote|197185|197186|197187|对于nextjs+web应用程序，特别是那些使用static+generation或SSR的应用程序，这将会起作用：|197188|在你的document.tsx中|197189|export+default+class+MyDocument+extends+Document+{
++render()+{
++++return+(
++++++<Html+lang="en">
++++++++.+.+.+.+.+
++++++++<body>
++++++++++<Main+/>
++++++++++<NextScript+/>
++++++++++{process.env.NODE_ENV+===+'production'+?+injectAnalytics()+:+''}
++++++++</body>
++++++</Html>
++++);
++}
}|code-block|syntax|javascript|197190|其中injectAnalytics是返回GA代码的函数，例如：|197191|function+injectAnalytics():+React.ReactFragment+{
++return+<>
++++{/*+Global+Site+Tag+(gtag.js)+-+Google+Analytics+*/}
++++<script
++++++async
++++++src={`https://www.googletagmanager.com/gtag/js?id=${GA_TRACKING_ID}`}
++++/>
++++<script
++++++dangerouslySetInnerHTML={{
++++++++__html:+`
++++++++++++++++++++window.dataLayer+=+window.dataLayer+%7C%7C+[];
++++++++++++++++++++function+gtag(){dataLayer.push(arguments);}
++++++++++++++++++++window.gtag+=+gtag;
++++++++++++++++++++gtag('js',+new+Date());

++++++++++++++++++++gtag('config',+'${GA_TRACKING_ID}',+{
++++++++++++++++++++++page_path:+window.location.pathname,
++++++++++++++++++++});
++++++++++++++++++`,
++++++}}
++++/>
++</>
}|197192|entityMap^0|8|7|X|9|0|0|0|0|0|O|H|16|3|0|0|0|2|F|0|0^^$0|@$1|2|3|4|5|6|7|12|8|@$9|13|A|14|B|C]|$9|15|A|16|B|D]]|E|@]|F|$]]|$1|G|3|H|5|6|7|17|8|@]|E|@]|F|$]]|$1|I|3|J|5|K|7|18|8|@]|E|@]|F|$]]|$1|L|3|-4|5|6|7|19|8|@]|E|@]|F|$]]|$1|M|3|-4|5|6|7|1A|8|@]|E|@]|F|$]]|$1|N|3|O|5|6|7|1B|8|@$9|1C|A|1D|B|D]|$9|1E|A|1F|B|D]]|E|@]|F|$]]|$1|P|3|Q|5|6|7|1G|8|@]|E|@]|F|$]]|$1|R|3|S|5|T|7|1H|8|@]|E|@]|F|$U|V]]|$1|W|3|X|5|6|7|1I|8|@$9|1J|A|1K|B|D]]|E|@]|F|$]]|$1|Y|3|Z|5|T|7|1L|8|@]|E|@]|F|$U|V]]|$1|10|3|-4|5|6|7|1M|8|@]|E|@]|F|$]]]|11|$]]

Unfortunatelly, it doesn't seem to be possible to exclude <code>localhost</code> from the reporting when using App + Web Properties type of setup:
<blockquote>
Displaying Filters for web-only Properties only. Filters can't be applied to App + Web Properties.
</blockquote>
For the nextjs web application, especially ones which are using <code>static generation</code> or <code>SSR</code> this would work:
In your document.tsx
<pre><code>export default class MyDocument extends Document {
 render() {
 return (
 &lt;Html lang=&quot;en&quot;&gt;
 . . . . . 
 &lt;body&gt;
 &lt;Main /&gt;
 &lt;NextScript /&gt;
 {process.env.NODE_ENV === 'production' ? injectAnalytics() : ''}
 &lt;/body&gt;
 &lt;/Html&gt;
 );
 }
}
</code></pre>
where <code>injectAnalytics</code> is a function which returns your GA code, for instance:
<pre><code>function injectAnalytics(): React.ReactFragment {
 return &lt;&gt;
 {/* Global Site Tag (gtag.js) - Google Analytics */}
 &lt;script
 async
 src={`https://www.googletagmanager.com/gtag/js?id=${GA_TRACKING_ID}`}
 /&gt;
 &lt;script
 dangerouslySetInnerHTML={{
 __html: `
 window.dataLayer = window.dataLayer || [];
 function gtag(){dataLayer.push(arguments);}
 window.gtag = gtag;
 gtag('js', new Date());

 gtag('config', '${GA_TRACKING_ID}', {
 page_path: window.location.pathname,
 });
 `,
 }}
 /&gt;
 &lt;/&gt;
}
</code></pre>

blocks|key|1496861|text|对于Google+Analytics+4+(GA4)，您可以创建一个规则来定义其流量应标记为内部的IP地址。|type|unstyled|depth|inlineStyleRanges|offset|length|style|BOLD|entityRanges|data|1496862|定义内部流量|1496863|路径:管理>属性>数据流>选择您的流>更多标记设置>定义内部流量|1496864|​|1496865|📷|atomic|1496866|1496867|定义一个规则以匹配代表您的内部流量的一个或多个IP。|1496868|1496869|1496870|1496871|GA4数据过滤器|1496872|路径:+Admin+>+Property+>+Data+Settings+>+Data+Filters|1496873|您会发现默认过滤器"Internal+Traffic“设置为"Testing”模式。|1496874|更改为"Active“以启用筛选器。|1496875|1496876|1496877|1496878|entityMap|0|IMAGE|mutability|IMMUTABLE|imageUrl|https://ask.qcloudimg.com/http-save/yehe-900000/fa23ef9e4eee73b93c65a8a81ba30c1f.png|imageAlt|1|https://ask.qcloudimg.com/http-save/yehe-900000/83765c6bcc2f031934aee869eeb010b9.png|2|https://ask.qcloudimg.com/http-save/yehe-900000/2089cefa00eb6e3801ed3b9fda2a98b2.png^0|2|O|0|0|0|0|0|1|0|0|0|0|0|0|1|1|0|0|0|0|0|0|0|0|1|2|0|0^^$0|@$1|2|3|4|5|6|7|1I|8|@$9|1J|A|1K|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|1L|8|@]|D|@]|E|$]]|$1|H|3|I|5|6|7|1M|8|@]|D|@]|E|$]]|$1|J|3|K|5|6|7|1N|8|@]|D|@]|E|$]]|$1|L|3|M|5|N|7|1O|8|@]|D|@$9|1P|A|1Q|1|1R]]|E|$]]|$1|O|3|K|5|6|7|1S|8|@]|D|@]|E|$]]|$1|P|3|Q|5|6|7|1T|8|@]|D|@]|E|$]]|$1|R|3|K|5|6|7|1U|8|@]|D|@]|E|$]]|$1|S|3|M|5|N|7|1V|8|@]|D|@$9|1W|A|1X|1|1Y]]|E|$]]|$1|T|3|K|5|6|7|1Z|8|@]|D|@]|E|$]]|$1|U|3|V|5|6|7|20|8|@]|D|@]|E|$]]|$1|W|3|X|5|6|7|21|8|@]|D|@]|E|$]]|$1|Y|3|Z|5|6|7|22|8|@]|D|@]|E|$]]|$1|10|3|11|5|6|7|23|8|@]|D|@]|E|$]]|$1|12|3|K|5|6|7|24|8|@]|D|@]|E|$]]|$1|13|3|M|5|N|7|25|8|@]|D|@$9|26|A|27|1|28]]|E|$]]|$1|14|3|K|5|6|7|29|8|@]|D|@]|E|$]]|$1|15|3|-4|5|6|7|2A|8|@]|D|@]|E|$]]]|16|$17|$5|18|19|1A|E|$1B|1C|1D|-4]]|1E|$5|18|19|1A|E|$1B|1F|1D|-4]]|1G|$5|18|19|1A|E|$1B|1H|1D|-4]]]]

For Google Analytics 4 (GA4), you can create a rule to define IP addresses whose traffic should be marked as internal.
<h2>Define Internal Traffic</h2>
Path: Admin &gt; Property &gt; Data Streams &gt; select your stream &gt; More Tagging Settings &gt; Define internal traffic
<a href="https://i.stack.imgur.com/oKcgX.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/oKcgX.png" alt="enter image description here" /></a>
Define a rule to match one or more IPs that represent your internal traffic.
<a href="https://i.stack.imgur.com/4vqlH.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/4vqlH.png" alt="enter image description here" /></a>
<h2>GA4 Data Filters</h2>
Path: Admin &gt; Property &gt; Data Settings &gt; Data Filters
You will find the default filter &quot;Internal Traffic&quot; set to &quot;Testing&quot; mode.
Change to &quot;Active&quot; to enable the filter.
<a href="https://i.stack.imgur.com/3Q0Pr.png" rel="nofollow noreferrer"><img src="https://i.stack.imgur.com/3Q0Pr.png" alt="enter image description here" /></a>

blocks|key|1267269|text|我正在使用这段代码在production的rails+6中禁用google+analytics。|type|unstyled|depth|inlineStyleRanges|offset|length|style|CODE|entityRanges|data|1267270|当admin登录时，我将is_developer+cookie设置为禁用1+year的google+analytics。|1267271|如果cookie注销，我不会删除is_developer+admin。因此，在admin注销后，google+analytics将被禁用。|1267272|您可以在测试后对所有console.log进行注释。|1267273|<%25+if+Rails.env.production?+%25>
++<%25+ga_tracking_id+=+'G-36......Y6'+%25>
++
++<script+async+src="https://www.googletagmanager.com/gtag/js?id=<%25=+ga_tracking_id+%25>"></script>

++<%25+if+user_signed_in?+&&+current_user.admin?+%25>
++++<script>
++++++if(document.cookie.indexOf('is_developer')+>+-1)+{
++++++++console.log('gtag:-+is_developer+cookie+already+set');
++++++}+else+{
++++++++document.cookie+=+`is_developer=1;+expires=${new+Date(new+Date().getTime()%2B1000*60*60*24*365).toGMTString()};+path=/`;
++++++++console.log('gtag:-+is_developer+cookie+set+for+1+year');
++++++}
++++</script>
++<%25+end+%25>

++<script>
++++if(document.cookie.indexOf('is_developer')+>+-1)+{
++++++console.log('gtag:-+disabled+for+developer');
++++}+else+{
++++++console.log('gtag:-+enabled');
++++++window.dataLayer+=+window.dataLayer+%7C%7C+[];
++++++function+gtag(){dataLayer.push(arguments);}
++++++gtag('js',+new+Date());
++++++gtag('config',+'<%25=+ga_tracking_id+%25>');
++++}
++</script>
<%25+end+%25>|code-block|syntax|javascript|1267274|如果你有任何建议，请在下面发表评论。|1267275|entityMap^0|A|A|L|7|V|G|0|1|5|C|C|10|6|17|G|0|G|C|T|5|13|5|1C|G|0|A|B|0|0|0^^$0|@$1|2|3|4|5|6|7|U|8|@$9|V|A|W|B|C]|$9|X|A|Y|B|C]|$9|Z|A|10|B|C]]|D|@]|E|$]]|$1|F|3|G|5|6|7|11|8|@$9|12|A|13|B|C]|$9|14|A|15|B|C]|$9|16|A|17|B|C]|$9|18|A|19|B|C]]|D|@]|E|$]]|$1|H|3|I|5|6|7|1A|8|@$9|1B|A|1C|B|C]|$9|1D|A|1E|B|C]|$9|1F|A|1G|B|C]|$9|1H|A|1I|B|C]]|D|@]|E|$]]|$1|J|3|K|5|6|7|1J|8|@$9|1K|A|1L|B|C]]|D|@]|E|$]]|$1|L|3|M|5|N|7|1M|8|@]|D|@]|E|$O|P]]|$1|Q|3|R|5|6|7|1N|8|@]|D|@]|E|$]]|$1|S|3|-4|5|6|7|1O|8|@]|D|@]|E|$]]]|T|$]]

I am using this code to disable <code>google analytics</code> in <code>rails 6</code> in <code>production</code>.
When <code>admin</code> login I set <code>is_developer</code> cookie to disable <code>google analytics</code> for <code>1 year</code>.
If <code>admin</code> logout, I do not delete <code>is_developer</code> cookie. So,<code>google analytics</code> will be disabled after <code>admin</code> logout.
You can comment all <code>console.log</code> after testing.
<pre><code>&lt;% if Rails.env.production? %&gt;
 &lt;% ga_tracking_id = 'G-36......Y6' %&gt;
 &lt;!-- Global site tag (gtag.js) - Google Analytics --&gt;
 &lt;script async src=&quot;https://www.googletagmanager.com/gtag/js?id=&lt;%= ga_tracking_id %&gt;&quot;&gt;&lt;/script&gt;

 &lt;% if user_signed_in? &amp;&amp; current_user.admin? %&gt;
 &lt;script&gt;
 if(document.cookie.indexOf('is_developer') &gt; -1) {
 console.log('gtag:- is_developer cookie already set');
 } else {
 document.cookie = `is_developer=1; expires=${new Date(new Date().getTime()+1000*60*60*24*365).toGMTString()}; path=/`;
 console.log('gtag:- is_developer cookie set for 1 year');
 }
 &lt;/script&gt;
 &lt;% end %&gt;

 &lt;script&gt;
 if(document.cookie.indexOf('is_developer') &gt; -1) {
 console.log('gtag:- disabled for developer');
 } else {
 console.log('gtag:- enabled');
 window.dataLayer = window.dataLayer || [];
 function gtag(){dataLayer.push(arguments);}
 gtag('js', new Date());
 gtag('config', '&lt;%= ga_tracking_id %&gt;');
 }
 &lt;/script&gt;
&lt;% end %&gt;

</code></pre>
If you have any suggestions, comment below.

I have added the JavaScript that I need to the bottom of my pages so that I can make use of Google Analytics. Only problem is that I am sure that it is counting all my development work as hits. Seeing as I probably see some of those pages a hundred times a day it will really skew my readings. Is there a way to turn it off from a particular IP address or is this something that should be built into my build process so it only gets added when I build for deployment?

Is there a way to stop Google Analytics counting development work as hits?

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云代码分析专区

腾讯iOA零信任安全管理系统专区

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋

腾讯云代码助手

云原生构建

TAPD 敏捷项目管理

Cloud Studio

SDK中心

API中心

命令行工具

涵盖代码开发、场景应用、自动测试全流程，助你从零构建专属AI助手

一站式MCP教程库，解锁AI应用新玩法

我已经添加了我需要的JavaScript到我的页面底部，以便我可以利用谷歌分析。唯一的问题是，我确信它将我的所有开发工作都算作点击量。因为我可能一天要看上百次这样的页面，这真的会让我的阅读产生偏差。有没有办法从特定的IP地址关闭它，或者这是应该内置到我的构建过程中的东西，以便只有当我为部署而构建时才会添加它？

问有没有办法停止Google Analytics将开发工作算作点击量？
EN

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问有没有办法停止Google Analytics将开发工作算作点击量？EN