blocks|key|762241|text|试试看|type|unstyled|depth|inlineStyleRanges|entityRanges|data|762242|set+http_proxy=
set+https_proxy=|code-block|syntax|javascript|762243|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

try,

<pre><code>set http_proxy=
set https_proxy=
</code></pre>

blocks|key|762286|text|从提升的命令提示符(CMD或PS)类型：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|762287|netsh+winhttp+reset+proxy|offset|length|style|CODE|762288|这应产生：|762289|C:\Windows\system32>netsh+winhttp+reset+proxy++Current+WinHTTP+proxy+settings:++++++Direct+access+(no+proxy+server).|762290|此命令将重置代理设置，如输出所示，它们将被设置为“无代理服务器”。|762291|您还可以键入netsh+winhttp+show+proxy来查看当前设置。|762292|entityMap^0|0|0|P|0|0|0|38|0|0|6|O|0^^$0|@$1|2|3|4|5|6|7|R|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|S|8|@$D|T|E|U|F|G]]|9|@]|A|$]]|$1|H|3|I|5|6|7|V|8|@]|9|@]|A|$]]|$1|J|3|K|5|6|7|W|8|@$D|X|E|Y|F|G]]|9|@]|A|$]]|$1|L|3|M|5|6|7|Z|8|@]|9|@]|A|$]]|$1|N|3|O|5|6|7|10|8|@$D|11|E|12|F|G]]|9|@]|A|$]]|$1|P|3|-4|5|6|7|13|8|@]|9|@]|A|$]]]|Q|$]]

From an elevated command prompt (CMD or PS) type:

<code>netsh winhttp reset proxy</code>

This should produce:

<code>C:\Windows\system32&gt;netsh winhttp reset proxy
 Current WinHTTP proxy settings:
 Direct access (no proxy server).</code>

This command will reset your proxy settings and as you can see by the output, they will be set to "no proxy server."

You can also type <code>netsh winhttp show proxy</code> to see what your current settings are.

blocks|key|762250|text|npm+config+delete+proxy+http

npm+config+delete+proxy+https|type|code-block|depth|inlineStyleRanges|entityRanges|data|syntax|javascript|762251|unstyled|entityMap^0|0^^$0|@$1|2|3|4|5|6|7|G|8|@]|9|@]|A|$B|C]]|$1|D|3|-4|5|E|7|H|8|@]|9|@]|A|$]]]|F|$]]

<pre><code>npm config delete proxy http

npm config delete proxy https
</code></pre>

blocks|key|1335884|text|以提升的权限运行CMD或Powershell+(以管理员身份运行)|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1335885|然后运行命令netsh+winhttp+reset+proxy.|offset|length|style|BOLD|CODE|1335886|P.S:当您尝试使用set+http_proxy=http://username:pass@hostname:port设置代理时，在命令提示符退出期间，代理可能会自动重置。|1335887|entityMap^0|0|6|P|6|P|0|A|1D|A|1D|0^^$0|@$1|2|3|4|5|6|7|M|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|N|8|@$D|O|E|P|F|G]|$D|Q|E|R|F|H]]|9|@]|A|$]]|$1|I|3|J|5|6|7|S|8|@$D|T|E|U|F|G]|$D|V|E|W|F|H]]|9|@]|A|$]]|$1|K|3|-4|5|6|7|X|8|@]|9|@]|A|$]]]|L|$]]

Run CMD or Powershell as elevated privilege(Run as administrator)
 Then run command
<code>netsh winhttp reset proxy</code>. 
P.S:
When you try to set proxy using <code>set http_proxy=http://username:pass@hostname:port</code> then during the exit of the command prompt, the proxy might get reset automatically.

blocks|key|707274|text|尝试以下步骤|type|unstyled|depth|inlineStyleRanges|entityRanges|data|707275|以管理员身份打开cmd提示符|ordered-list-item|707276|执行netsh+netsh重置代理|offset|length|style|BOLD|707277|执行netsh+winhttp显示代理-您应该将当前的代理设置视为直接访问(没有代理服务器)。|707278|重启PC+-在运行上述命令后，我没有重新启动我的pc，当我执行echo+%25HTTP_PROXY%25时，我仍然遇到代理问题，重新启动将永久清除代理。|707279|执行echo+%25HTTP_PROXY%25+-它不应该返回任何内容。|707280|如果成功了就告诉我，干杯！|707281|entityMap^0|0|0|2|F|0|2|H|X|E|0|0|20|0|0|W|0|0|D|0^^$0|@$1|2|3|4|5|6|7|U|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|V|8|@]|9|@]|A|$]]|$1|E|3|F|5|D|7|W|8|@$G|X|H|Y|I|J]]|9|@]|A|$]]|$1|K|3|L|5|D|7|Z|8|@$G|10|H|11|I|J]|$G|12|H|13|I|J]]|9|@]|A|$]]|$1|M|3|N|5|D|7|14|8|@$G|15|H|16|I|J]]|9|@]|A|$]]|$1|O|3|P|5|D|7|17|8|@$G|18|H|19|I|J]]|9|@]|A|$]]|$1|Q|3|R|5|6|7|1A|8|@$G|1B|H|1C|I|J]]|9|@]|A|$]]|$1|S|3|-4|5|6|7|1D|8|@]|9|@]|A|$]]]|T|$]]

Try below steps
<ol>
<li>Open cmd prompt as administrator</li>
<li>Execute netsh winhttp reset proxy</li>
<li>Execute netsh winhttp show proxy - you should see your current proxy settings as Direct access (no proxy server).</li>
<li>Reboot PC - I didn't reboot my pc after running above commands and I still got proxy issues when I did echo %HTTP_PROXY%, rebooting cleared the proxy permanently.</li>
<li>execute echo %HTTP_PROXY% - it should return nothing.</li>
</ol>
Let me know if it works, cheers!

blocks|key|762304|text|要删除未来cmd实例的变量，请执行以下操作：|type|unstyled|depth|inlineStyleRanges|entityRanges|data|762305|++++setx+http_proxy+""
++++setx+https_proxy+""|code-block|syntax|javascript|762306|entityMap^0|0|0^^$0|@$1|2|3|4|5|6|7|I|8|@]|9|@]|A|$]]|$1|B|3|C|5|D|7|J|8|@]|9|@]|A|$E|F]]|$1|G|3|-4|5|6|7|K|8|@]|9|@]|A|$]]]|H|$]]

To delete variables for future cmd instances:
<pre><code> setx http_proxy &quot;&quot;
 setx https_proxy &quot;&quot;
</code></pre>

blocks|key|1335519|text|我读过urllib.request.proxyhandler。|type|unstyled|depth|inlineStyleRanges|entityRanges|data|1335520|最简单的方法(自行测试和追加)是添加一个no_proxy，如下所示：|1335521|SET+no_proxy=abc.com,john.com:8080|code-block|syntax|javascript|1335522|entityMap^0|0|0|0^^$0|@$1|2|3|4|5|6|7|K|8|@]|9|@]|A|$]]|$1|B|3|C|5|6|7|L|8|@]|9|@]|A|$]]|$1|D|3|E|5|F|7|M|8|@]|9|@]|A|$G|H]]|$1|I|3|-4|5|6|7|N|8|@]|9|@]|A|$]]]|J|$]]

I've read the urllib.request.proxyhandler.
The easiest way (test and approuved by myself) is to add an no_proxy such as this :
<pre><code>SET no_proxy=abc.com,john.com:8080
</code></pre>

I had set proxy settings in cmd when I was in a proxy network as follows:

<code>set http_proxy=http://username:pass@hostname:port</code>

<code>set https_proxy=https://username:pass@hostname:port</code>

Now that I am on a normal network I want to unset the proxy settings in the command prompt.Is there any direct command that would let me unset the <code>http_proxy</code> and <code>https_proxy</code> environment variables directly for the command line rather that navigating through the GUI to delete them?

Remove proxy settings from the windows command prompt

翻译质量差，导致语言生硬或混乱。

没有提供实际的解决方法或示例。

解答不清晰，无法理解或解决问题。

页面排版不美观，阅读体验差。

文章

问答

视频

学习中心

腾讯云实验室

直播

竞赛

腾讯云架构师技术同盟交流圈

腾讯云数据库专区

腾讯云顾问专区

腾讯云原生专区

腾讯混元专区

腾讯云TCE专区

腾讯云Lighthouse专区

腾讯云HAI专区

腾讯云Edgeone专区

腾讯云存储专区

腾讯云智能专区

腾讯轻联专区 

腾讯云开发专区

TAPD专区

腾讯轻量云游戏服专区

腾讯云最具价值专家

腾讯云架构师技术同盟

腾讯云创作之星

腾讯云开发者先锋 

腾讯云代码助手

CODING DevOps

Cloud Studio

SDK中心

API中心

命令行工具

当我在代理网络中时，我已经在cmd中设置了以下代理设置：set http_proxy=http://username:pass@hostname:portset https_proxy=https://username:pass@hostname:port现在我在一个正常的网络上，我想取消命令prompt.Is中的代理设置，有什么直接命令可以让我直接为命令行取消http_proxy和https_p

问从windows命令提示符中删除代理设置
EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问从windows命令提示符中删除代理设置EN

回答 7

Stack Overflow用户

Stack Overflow用户

Stack Overflow用户

社区

活动

圈层

关于

腾讯云开发者

热门产品

热门推荐

更多推荐

问从windows命令提示符中删除代理设置
EN